1. an audio component with an ISO_639_language_descriptor in the PMT with the
audio_type field set to 0x03
2. a supplementary_audio_descriptor with the editorial_classification field set
to 0x01
3. an ac-3_descriptor or an enhanced_ac-3_descriptor with a component_type field
with the service_type flags set to Visually Impaired
Tested-by: Łukasz Krzciuk <lkrzciuk@vewd.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>

This way, every CodedBitstreamType->split_fragment() function can
safely assume the fragment passed to them will be reference counted,
potentially simplifying code.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Update documentation with new size default.
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Overlap filtering of the first row and first column must be guarded
for out of bounds access of v->over_flags_plane.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

The track's media duration from the mdhd atom takes precedence
over both the stts and elst atom for calculating and setting
the track's total duraion.

Technically, we shouldn't be using the stts atom at all for
calculating stream durations.

This fixes incorrect stream and final packet durations on files
with edit lists that are longer than the media duration.

The FATE changes are expected, and output is more correct (the
AAC frame is not 1028 samples).
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

The av_rc4_crypt() documentation allows src == dst.

Silences the following warning:
libavformat/rtmpcrypt.c:304:36: warning: passing argument 2 of 'av_rc4_crypt' discards 'const' qualifier from pointer target type

Reported-by: Reino Wijnsma

There is a separate muxer(webmdashenc.c) for supporting VP9+webm output in DASH.
Hence in this muxer we will focus on supporting VP9 in MP4
Have verified playout support of VP9+MP4 in Chrome and Firefox.

Otherwise some versions of chrome browser returns "codec not supported" error

Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Signed-off-by: guikunzhi <guikunzhi@163.com>

Fixes: runtime error: signed integer overflow: 197710 * 10923 cannot be represented in type 'int'
Fixes: 7010/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPEG4_fuzzer-5667127596941312

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes infinite loop
Fixes: 6858/clusterfuzz-testcase-ffmpeg_AV_CODEC_ID_MSMPEG4V3_fuzzer-4681563766784000
Fixes: 6890/clusterfuzz-testcase-ffmpeg_AV_CODEC_ID_WMV1_fuzzer-4756103142309888

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes misaligned accesses
Found-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: 6798/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_G2M_fuzzer-5135899701542912

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

HALFQP should only be added to the inverse quantizer when the block is
coded with PQUANT. When PQUANT is equal to ALTPQUANT, the original test
for the addition of HALFQP fails. A negative value for mquant indicates
that the value was derived from VOPDQUANT.

Fixes #4372
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

correct forgotten v->blocks_off
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

HALFQP should only be added to the inverse quantizer when the block is
coded with PQUANT. See 8.1.3.8 in VC-1 spec.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

mspel indicates the use of bicubic interpolation. The check wrongly included
MVMODE MV_PMODE_1MV_HPEL as using bilinear interpolation.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

remove unused overlap smooting and loop filter
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

Add previously omitted overlap smooting and loop filtering for
frame/field-interlace pictures. For progressive pictures switch to the
re-implemented versions of overlap smooting and loop filtering.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

The existing implementation only used vc1_put_signed_blocks_clamped for I and
BI frames. This rewritten version is also applicable to P frame both
progressive and frame/field-interlace.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

The existing implementation did out-of-bounds reference pixel replication for
progressive reference frames. In interlaced reference frames both the even and
odd line on the horizontal edges need to be replicated.

Fixes #3262.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

According to VC-1 spec table 74, the last value in ff_vc1_dqscale should be
0x1041 instead of 0x1000.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

According to VC-1 spec 10.7.3.4, FIELDTX shall be set to the same type as the
motion vector for zero-coded blocks.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

The loop filter for P interlace field pictures needs the reference field type.
For luma, the reference field type was already available. Store the reference
field type for color-difference as well.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

The new loop filter needs additional MB properties to make its filtering
decisions.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

The existing implementation did loop filtering for progressive
frames only. This rewritten version implements loop filtering for
all applicable frame types for both progessive and
frame/field-interlace.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

The new overlap smooting filter smoothes image pixels stored in v->block.
Switch to v->block instead of s->block for storing decoded image pixels for P
frames. Additionally, we must take incrementing *_blk_idx out of the
vc1_put_signed_blocks_clamped function.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

The existing implementation did overlap smoothing for progressive
frames only. This rewritten version implements overlap smoothing
for all applicable frame types for both progessive and
frame/field-interlace.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>

before:
419022 decicycles in assemble_fragment,    2047 runs,      1 skips

after:
104621 decicycles in assemble_fragment,    2045 runs,      3 skips

Benched with a 2 minutes long 720x480 DVD mpeg2 sample.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Avoids unnecessary allocs+copies and makes the code slightly simpler.
Signed-off-by: James Almer <jamrial@gmail.com>