All of these values are derived from the self samples count and there is no need to evaluate them in v8 when clients can do that when needed on their side.

Also added unsigned GetHitCount() which should be used instead of double GetSelfSamplesCount(). I'm going to deprecate the latter one once Blink has switched to GetHitCount.

BUG=267595
TBR=svenpanne@chromium.org

Review URL: https://codereview.chromium.org/22710006

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16119 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Port r16114 (2d1bf399)

Original commit message:
This patch is to enhance the source code line information for profiler.

For the Hydrogen compilation, most of the source code line information
is not copied from the HInstruction the to corresponding LInstruction.

This patch defines one PositionBits field for LInstruction and copies the
sorce code position value from the HInstruction.

When Generating the native code, we use RecordPosition(..) function to
write LInstruction's position value to position recorder.

BUG=

Review URL: https://codereview.chromium.org/22502006

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16118 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This reverts commit r16116 due to WebKit compilation breakage. Will reland it once Blink r155755 is rolled into Chromium.

TBR=svenpanne@chromium.org
BUG=None

Review URL: https://codereview.chromium.org/22388003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16117 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

All of these values are derived from the self samples count and there is no need to evaluate them in v8 when clients can do that when needed on their side.

Also added unsigned GetHitCount() which should be used instead of double GetSelfSamplesCount(). I'm going to deprecate the latter one once Blink has switched to GetHitCount.

BUG=267595
R=loislo@chromium.org, svenpanne@chromium.org

Review URL: https://codereview.chromium.org/22347003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16116 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This simple change moves the Deoptimize call into the Deopt table
where it belongs, and shortens the inline map-check.

Gives a surprisingly large performance gain, around 4% on Octane.

BUG=
R=gergely@homejinni.com

Review URL: https://codereview.chromium.org/22391008

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16115 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This patch is to enhance the source code line information for profiler.

For the Hydrogen compilation, most of the source code line information
is not copied from the HInstruction the to corresponding LInstruction.

This patch defines one PositionBits field for LInstruction and copies the
sorce code position value from the HInstruction.

When Generating the native code, we use RecordPosition(..) function to
write LInstruction's position value to position recorder.

For the MIPS platform, I did not touch because I have no devices
to verify the modification on it.

R=danno@chromium.org

Review URL: https://codereview.chromium.org/21042003

Patch from Chunyang Dai <chunyang.dai@intel.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16114 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/22285003

Patch from Weiliang Lin <weiliang.lin@intel.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16113 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Additionally, fix object size register clobbering in Allocate routine.

Based on 13284 (d42bf80).

BUG=
R=plind44@gmail.com

Review URL: https://codereview.chromium.org/22582002

Patch from Dusan Milosavljevic <Dusan.Milosavljevic@rt-rk.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16112 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=2774,2779
R=adamk@chromium.org

Review URL: https://chromiumcodereview.appspot.com/22562004

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16111 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Due to buildbot failures.

BUG=
R=danno@chromium.org

Review URL: https://chromiumcodereview.appspot.com/22474007

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16110 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This change provides an API for the embedder to tell CPU profiler if it is idle or busy with some task. This way we can discriminate between idle time and some native code execution.

BUG=268947
R=alph@chromium.org, yangguo@chromium.org

Review URL: https://codereview.chromium.org/22412003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16109 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=
R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/21495005

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16108 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Port r16098 (328ff5f7)

Original commit message:
This change implements a simple data-flow analysis pass over captured
objects to the existing escape analysis. It tracks the state of values
in the Hydrogen graph through CapturedObject marker instructions that
are used to construct an appropriate translation for the deoptimizer to
be able to materialize these objects again.

This can be considered a combination of scalar replacement of loads and
stores on captured objects and sinking of unused allocations.

TEST=mjsunit/compiler/escape-analysis

BUG=

Review URL: https://codereview.chromium.org/22580003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16107 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=yangguo@chromium.org

Review URL: https://codereview.chromium.org/22420004

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16106 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=palfia@homejinni.com

Review URL: https://codereview.chromium.org/22571003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16102 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This was an omission in https://code.google.com/p/v8/source/detail?r=14051.

R=rossberg@chromium.org

Review URL: https://codereview.chromium.org/22578002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16101 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=yangguo@chromium.org

Review URL: https://codereview.chromium.org/22198002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16100 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=v8:2745
R=dcarney@chromium.org, mstarzinger@chromium.org

Review URL: https://codereview.chromium.org/22266009

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16099 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This change implements a simple data-flow analysis pass over captured
objects to the existing escape analysis. It tracks the state of values
in the Hydrogen graph through CapturedObject marker instructions that
are used to construct an appropriate translation for the deoptimizer to
be able to materialize these objects again.

This can be considered a combination of scalar replacement of loads and
stores on captured objects and sinking of unused allocations.

R=titzer@chromium.org
TEST=mjsunit/compiler/escape-analysis

Review URL: https://codereview.chromium.org/21055011

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16098 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=
R=hpayer@chromium.org, mstarzinger@chromium.org

Review URL: https://codereview.chromium.org/22379002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16095 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

It should be able to return Smi, etc. Not only JSObject.

BUG=v8:2821
TEST=cctest/test-api/JSONParseNumber
R=yangguo@chromium.org

Review URL: https://codereview.chromium.org/22416003

Patch from Takeshi Yoshino <tyoshino@chromium.org>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16092 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=danno@chromium.org

Review URL: https://codereview.chromium.org/22468004

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16091 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=yangguo@chromium.org

Review URL: https://codereview.chromium.org/22556002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16090 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=svenpanne@chromium.org
BUG=

Review URL: https://codereview.chromium.org/22384003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16089 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=svenpanne@chromium.org

Review URL: https://codereview.chromium.org/22554002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16088 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=danno@chromium.org

Review URL: https://codereview.chromium.org/22274017

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16087 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=v8:2745
R=dcarney@chromium.org, mstarzinger@chromium.org

Review URL: https://codereview.chromium.org/22411003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16086 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

* This makes sure that DoModI calculates correct result even when
  the left register is the same as the result register.
* Microoptmization: it generates smaller code when left and result
  are different registers.

TEST=benchmarks/sunspider/crypto-aes.js

BUG=

Review URL: https://codereview.chromium.org/22491002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16085 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

These factory methods used pointers for constructor fucntions, therefore
those pointers could corrupt if allocation triggered gc.

R=mstarzinger@chromium.org

Review URL: https://codereview.chromium.org/22426003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16084 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

TBR=yangguo@chromium.org

Review URL: https://codereview.chromium.org/22473002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16083 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=264203
TEST=test/mjsunit/regress/regress-264203
R=danno@chromium.org

Review URL: https://chromiumcodereview.appspot.com/22314012

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16082 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=bmeurer@chromium.org

Review URL: https://codereview.chromium.org/22314010

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16081 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Test expectations can now include outcome: FLAKY.

The test runner can now run a class of tests (flaky|non-flaky|all). All tests are in the non-flaky class that are not marked as FLAKY.

The slash correction for windows is now pulled into the test name method. Currently the progress output on windows contains a mixture of / and \.

R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/22381003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16080 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=titzer@chromium.org
BUG=

Review URL: https://codereview.chromium.org/22424002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16079 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

V8EXPORT is defined in each header of V8 public API and the definitions already have some slight discrepancies. This CL makes all headers use the same definition in v8.h

BUG=None
R=svenpanne@chromium.org

Review URL: https://codereview.chromium.org/22363003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16078 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

TBR=mstarzinger@chromium.org
BUG=265369

Review URL: https://codereview.chromium.org/22428002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16077 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=mstarzinger@chromium.org
BUG=265369

Review URL: https://codereview.chromium.org/22284009

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16076 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

If an developer attempts to "subclass" Error by running
`MyError.prototype = new Error();`, then the internal v8::Message object
that's produced and handed off to `window.onerror` handlers is poorly
stringified as "[object Object]".

This patch adjusts the stringification process for these objects to
include not only native Error objects, but also objects that have Error
in their prototype chain, and haven't overwritten Error.toString with
some custom variant.

BUG=2822
R=mstarzinger@chromium.org, yangguo@chromium.org

Review URL: https://codereview.chromium.org/21761002

Patch from Mike West <mkwst@chromium.org>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16075 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

https://codereview.chromium.org/19541010/

The main problem is that if you called Object.getNotifier(obj) on an object, %SetObserved(object) would never get called on it, and thus it would be unobservable (new test added for this).

Additionally, Runtime::SetObserved was asserting obj->IsJSObject() which would fail if called on a proxy.

It just happens that our existing test always called getNotifier() before Object.observe on proxies, and thus we never previously attempted to transition the map of a proxy.

Both issues are now fixed and properly tested.

R=rossberg@chromium.org

Review URL: https://codereview.chromium.org/21891008

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16074 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=mstarzinger@chromium.org, verwaest@chromium.org

Review URL: https://codereview.chromium.org/22184004

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@16073 ce2b1a6d-e550-0410-aec6-3dcde31c8c00