Port r18025 (74fc739)

BUG=

Review URL: https://codereview.chromium.org/83913002

Patch from Balazs Kilvady <kilvadyb@homejinni.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18032 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Port r18024 (8956065)

BUG=

Review URL: https://codereview.chromium.org/83483005

Patch from Balazs Kilvady <kilvadyb@homejinni.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18031 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This commit fixes a lot of test failures that we saw earlier in the buildbots (http://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20mips%20-%20sim/builds/3034/steps/Check/logs/stdio).

In some very rare cases the code age stub address can be 0xXXXX0000 and in this case the li maco instruction emits only 1 instruction (instead of the expected 2). Thus the code age sequence will be 6 instructions long instead of 7, which breaks the code aging feature. This change makes sure that li always emits 2 instructions and it also simplifies the code aging sequence.

Also fixes a small mistake in the simulator at the jalr instruction.

BUG=
R=gergely@homejinni.com

Review URL: https://codereview.chromium.org/83583003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18030 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=hpayer@chromium.org

Review URL: https://codereview.chromium.org/78953003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18029 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=
R=ulan@chromium.org

Review URL: https://codereview.chromium.org/83423002

Patch from Balazs Kilvady <kilvadyb@homejinni.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18027 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=
R=ishell@chromium.org

Review URL: https://chromiumcodereview.appspot.com/80693002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18025 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=ishell@chromium.org

Review URL: https://chromiumcodereview.appspot.com/78023002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18024 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=none
R=svenpanne@chromium.org
LOG=y

Review URL: https://codereview.chromium.org/83363003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18021 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

The changes are (excluding presubmit.py) mechanical. I added the following
lines after the check and iterated the presubmit script until all errors
went away:

f = open(name, "w");
if contents.endswith('\n\n'):
  f.write(contents[0:-1])
else:
  f.write(contents + '\n')

R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/82803005

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18017 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=
R=danno@chromium.org, jkummerow@chromium.org

Review URL: https://codereview.chromium.org/83533002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18016 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=verwaest@chromium.org
BUG=

Review URL: https://codereview.chromium.org/83003003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18015 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

It avoids having dead pointers in code from the time it was marked for deoptimization until it is deoptimized.

BUG=320532,v8:2996
TEST=mjsunit/regress/regress-320532.js
LOG=Y
R=danno@chromium.org

Review URL: https://chromiumcodereview.appspot.com/61213012

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18013 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Also turn on deprecation warnings

BUG=v8:3023
R=svenpanne@chromium.org, dcarney@chromium.org
LOG=n

Review URL: https://codereview.chromium.org/83343002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18011 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=verwaest@chromium.org
BUG=

Review URL: https://codereview.chromium.org/75423002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18010 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Also turn on deprecation warnings

BUG=v8:3023
R=svenpanne@chromium.org, dcarney@chromium.org
LOG=n

Review URL: https://codereview.chromium.org/83333002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18009 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Also turn on depreaction warnings

BUG=v8:3023
R=svenpanne@chromium.org, dcarney@chromium.org
LOG=n

Review URL: https://codereview.chromium.org/83323003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18008 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Also turn on deprecation warnings for samples

BUG=v8:3023
R=dcarney@chromium.org, svenpanne@chromium.org
LOG=n

Review URL: https://codereview.chromium.org/83313002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18007 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/83353002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18006 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

For 31-bit smis, we don't need to explicitly check whether the
combined string length exceeds the max supported string length,
since the value must be converted to a smi at some point (i.e.
when it is stored into the string length field of the resulting
string), which will emit an overflow check.

For 32-bit smis, we insert an explicit check that the combined
string length does not exceed String::kMaxLength.

This also enables to get rid of the JoinContinuation() usage in
BuildUncheckedStringAdd().

BUG=v8:2990
LOG=n
R=mvstanton@chromium.org

Review URL: https://codereview.chromium.org/82733003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18005 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Just ask the graph builder whether we are compiling a stub.

R=svenpanne@chromium.org

Review URL: https://codereview.chromium.org/83073003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18004 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

The main change is that a bit has been added to array buffers to
signal that the backing store has to be freed when the buffer dies.

BUG=316359
LOG=Y
R=yangguo@chromium.org

Review URL: https://codereview.chromium.org/82763005

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18003 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

We turn the default for standalone builds on, however, I added overrides
to all targets to turn it locally off again. In follow up CLs, I'll
clean up one target at a time.

BUG=v8:3023
R=dcarney@chromium.org, machenbach@chromium.org
LOG=n

Review URL: https://codereview.chromium.org/82763004

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18002 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=bmeurer@chromium.org

Review URL: https://codereview.chromium.org/83253002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18001 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

and preserve FP registers on NotifyStubFailure.

In debug mode, clobber FP registers on each runtime call to increase
chances of catching such bugs.

R=danno@chromium.org

Review URL: https://chromiumcodereview.appspot.com/78283002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@18000 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=danno@chromium.org

Review URL: https://codereview.chromium.org/83173002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17997 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17996 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/81193002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17995 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=jkummerow@chromium.org
BUG=

Review URL: https://codereview.chromium.org/82913003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17989 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=danno@chromium.org

Review URL: https://codereview.chromium.org/78263005

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17988 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Refactor the mock code for easier reuse. Mock out web requests.

TEST=python -m unittest test_scripts
BUG=
R=ulan@chromium.org

Review URL: https://codereview.chromium.org/77453009

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17987 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

AllocationSite-based pretenuring needs additional fields to carry out
calculations.

R=hpayer@chromium.org

Review URL: https://codereview.chromium.org/43603002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17986 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=svenpanne@chromium.org

Review URL: https://codereview.chromium.org/79343009

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17985 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

This reverts r17983.

TBR=danno@chromium.org

Review URL: https://codereview.chromium.org/79263005

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17984 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

ToPositiveInteger already makes sure that if l can be represented as a
smi, it will be represented as a smi.  This way we can avoid doing a
runtime call to retrieve a constant.

R=dslomov@chromium.org

Review URL: https://codereview.chromium.org/81063002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17983 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Revert 17966, 17965 also as collateral damage: Embed trigonometric lookup table.

Due to Heapcheck and valgrind failures that are not yet fixed.

TBR=svenpanne@chromium.org

Review URL: https://codereview.chromium.org/80513004

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17981 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/81043002

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17980 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

c.f. https://code.google.com/p/v8/wiki/Contributing

BUG=none
R=jkummerow@chromium.org, machenbach@chromium.org
LOG=n

Review URL: https://codereview.chromium.org/80783004

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17979 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Port r17923 (837f909)

Original commit message:
Optimize register constraints and code generated for AccessArgumentsAt Lithium instruction.

BUG=
R=plind44@gmail.com

Review URL: https://codereview.chromium.org/79143007

Patch from Balazs Kilvady <kilvadyb@homejinni.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17977 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

Over the initial commit, this CL moves the lifetime management of the default
platform to v8.cc from api.cc

R=bmeurer@chromium.org, svenpanne@chromium.org
BUG=v8:3015
LOG=n

Review URL: https://codereview.chromium.org/78453003

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17970 ce2b1a6d-e550-0410-aec6-3dcde31c8c00

BUG=v8:3004
R=svenpanne@chromium.org, yangguo@chromium.org
LOG=y

Review URL: https://codereview.chromium.org/62283010

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@17967 ce2b1a6d-e550-0410-aec6-3dcde31c8c00