Skip to content

V
V8
Switch branch/tag
  1. 03 Jun, 2022 1 commit
  3. 02 Jun, 2022 1 commit
    • Manos Koukoutos's avatar
      [wasm-gc][turbofan] Implement typing phase · aee0ec97
      Manos Koukoutos authored 
      We introduce a typing phase into the Turbofan compilation pipeline for
wasm-gc. It has two functionalities: (1) to type nodes that were not
typed during code generation (mainly phi nodes) and (2) to narrow types
as much as possible.
The following nodes are handled, which should be enough for our
purposes: TypeGuard, WasmTypeCast, AssertNotNull, Phi, LoadFromObject,
and LoadImmutableFromObject.
Loop phi types are computed by first assigning the type of the
non-recursive input, and updating once we have the type of the recursive
inputs, and repeating this process to a fixed point.

Drive-by: Remove the narrowing of function signatures during wasm
inlining, as it created some issues and should not be needed after this
series of changes.

Bug: v8:7748
Change-Id: I8a72488d5c221c4ae8257fc5abf6f0368cf10e96
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3678208
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: 's avatarMaya Lekova <mslekova@chromium.org>
Reviewed-by: 's avatarJakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/main@{#80912}
      aee0ec97
  5. 31 May, 2022 1 commit
  7. 05 May, 2022 1 commit
  9. 12 May, 2021 1 commit
    • Manos Koukoutos's avatar
      [turbofan] Disallow floating control in wasm · 02ac71e2
      Manos Koukoutos authored 
      Loop unrolling did not work properly with floating control. Seeing as
very few spots in the wasm compiler introduced floating control, we
decided to disallow it altogether.
Changes:
- When lowering 64-bit rol/ror/clz/ctz in 32-bit platforms, we use a
  diamond operator, which used to introduce floating control. This CL
  adds a control edge to these operators so that the diamond can be
  chained to that control instead.
- During loop analysis, as an additional safety check, we check that the
  explored loop does not have floating control. Exceptionally, floating
  control pointing directly do start() is allowed.
- Change wasm-compiler so that generated floating projections point to
  start() even after stack check patch-in.

Bug: chromium:1184929, v8:11298
Change-Id: I1ee063f5250037ae6c84d2f16b0bd8fff3923117
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2876851Reviewed-by: 's avatarGeorg Neis <neis@chromium.org>
Reviewed-by: 's avatarNico Hartmann <nicohartmann@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74527}
      02ac71e2
  11. 16 Apr, 2021 3 commits
    • Leszek Swirski's avatar
      Reland "[codegen] Add static interface descriptors" · 2871e05c
      Leszek Swirski authored 
      This is a reland of ae0752df

Reland fixes:

  * Remove UNREACHABLE() from constexpr switch, since we don't have a
    CONSTEXPR_UNREACHABLE() (it's ok, the switch is exhaustive for the
    enum anyway).
  * Fix IsRegisterArray trait to use public inheritance and size_t for
    std::array size.

Original change's description:
> [codegen] Add static interface descriptors
>
> Add a new CRTP StaticCallInterfaceDescriptor class, which provides
> static constexpr getters for a descriptor's registers, parameter counts,
> and so on. Each CallInterfaceDescriptor subclass is changed to extend
> StaticCallInterfaceDescriptor, with StaticCallInterfaceDescriptor itself
> extending CallInterfaceDescriptor to still provide a dynamic lookup
> where needed.
>
> StaticCallInterfaceDescriptor provides a couple of customisation points,
> where it reads its CRTP derived descriptor's static fields and
> functions, with default fallbacks where appropriate. With these
> customisation points, the definition of CallInterfaceDescriptor
> subclasses is simplified to:
>
>     a) Providing parameter names (as before)
>     b) Providing parameter types (as before)
>     c) Optionally setting flags (like kNoContext or kAllowVarArgs) as
>        static booleans on the class.
>     d) Optionally providing a `registers()` method that returns a
>        std::array<Register, N> of registers that may be used for
>        parameters (if not provided, this defaults to the implementation
>        specific default register set).
>
> Parameter registers (and register count) are automagically set based on
> the number of parameters and number of given registers, with extra magic
> to ignore no_reg registers (to reduce ia32 special casing). The
> CallInterfaceDescriptorData is initialized based on these static
> functions, rather than manual per-descriptor initializers.
>
> This allows us to skip loading descriptors dynamically for CallBuiltin
> in Sparkplug, and instead lets us use a bit of template magic to
> statically set up arguments for the calls. Any other users of statically
> known descriptors will also benefit, thanks to C++ picking the static
> methods over the dynamic methods on the base class when available.
>
> Because we can remove various virtual functions and trigger heavier
> inlining of constantly known values, binary size slightly decreases with
> this change.
>
> Note that torque-generated descriptors are changed to use the same magic,
> rather than having Torque-specific magic, for consistency.
>
> Bug: v8:11420
> Change-Id: Icc5e238b6313a08734feb564204a13226b450c22
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2814518
> Auto-Submit: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
> Reviewed-by: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73996}

TBR=nicohartmann@chromium.org,clemensb@chromium.org,ishell@chromium.org,clemensb@chromium.org

Bug: v8:11420
Change-Id: Icd1f6cdb3c178e74460044b1e9623139929ceba8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831872Reviewed-by: 's avatarLeszek Swirski <leszeks@chromium.org>
Reviewed-by: 's avatarClemens Backes <clemensb@chromium.org>
Reviewed-by: 's avatarIgor Sheludko <ishell@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74010}
      2871e05c
    • Leszek Swirski's avatar
      Revert "[codegen] Add static interface descriptors" · 5dea60d6
      Leszek Swirski authored 
      This reverts commit ae0752df.

Reason for revert: Predictably, constexpr issues on non-clang compilers.

Original change's description:
> [codegen] Add static interface descriptors
>
> Add a new CRTP StaticCallInterfaceDescriptor class, which provides
> static constexpr getters for a descriptor's registers, parameter counts,
> and so on. Each CallInterfaceDescriptor subclass is changed to extend
> StaticCallInterfaceDescriptor, with StaticCallInterfaceDescriptor itself
> extending CallInterfaceDescriptor to still provide a dynamic lookup
> where needed.
>
> StaticCallInterfaceDescriptor provides a couple of customisation points,
> where it reads its CRTP derived descriptor's static fields and
> functions, with default fallbacks where appropriate. With these
> customisation points, the definition of CallInterfaceDescriptor
> subclasses is simplified to:
>
>     a) Providing parameter names (as before)
>     b) Providing parameter types (as before)
>     c) Optionally setting flags (like kNoContext or kAllowVarArgs) as
>        static booleans on the class.
>     d) Optionally providing a `registers()` method that returns a
>        std::array<Register, N> of registers that may be used for
>        parameters (if not provided, this defaults to the implementation
>        specific default register set).
>
> Parameter registers (and register count) are automagically set based on
> the number of parameters and number of given registers, with extra magic
> to ignore no_reg registers (to reduce ia32 special casing). The
> CallInterfaceDescriptorData is initialized based on these static
> functions, rather than manual per-descriptor initializers.
>
> This allows us to skip loading descriptors dynamically for CallBuiltin
> in Sparkplug, and instead lets us use a bit of template magic to
> statically set up arguments for the calls. Any other users of statically
> known descriptors will also benefit, thanks to C++ picking the static
> methods over the dynamic methods on the base class when available.
>
> Because we can remove various virtual functions and trigger heavier
> inlining of constantly known values, binary size slightly decreases with
> this change.
>
> Note that torque-generated descriptors are changed to use the same magic,
> rather than having Torque-specific magic, for consistency.
>
> Bug: v8:11420
> Change-Id: Icc5e238b6313a08734feb564204a13226b450c22
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2814518
> Auto-Submit: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
> Reviewed-by: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#73996}

Bug: v8:11420
Change-Id: Ie5469c9253fc140590ac30b72db6eb1d93f86806
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2831485
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Cr-Commit-Position: refs/heads/master@{#74000}
      5dea60d6
    • Leszek Swirski's avatar
      [codegen] Add static interface descriptors · ae0752df
      Leszek Swirski authored 
      Add a new CRTP StaticCallInterfaceDescriptor class, which provides
static constexpr getters for a descriptor's registers, parameter counts,
and so on. Each CallInterfaceDescriptor subclass is changed to extend
StaticCallInterfaceDescriptor, with StaticCallInterfaceDescriptor itself
extending CallInterfaceDescriptor to still provide a dynamic lookup
where needed.

StaticCallInterfaceDescriptor provides a couple of customisation points,
where it reads its CRTP derived descriptor's static fields and
functions, with default fallbacks where appropriate. With these
customisation points, the definition of CallInterfaceDescriptor
subclasses is simplified to:

    a) Providing parameter names (as before)
    b) Providing parameter types (as before)
    c) Optionally setting flags (like kNoContext or kAllowVarArgs) as
       static booleans on the class.
    d) Optionally providing a `registers()` method that returns a
       std::array<Register, N> of registers that may be used for
       parameters (if not provided, this defaults to the implementation
       specific default register set).

Parameter registers (and register count) are automagically set based on
the number of parameters and number of given registers, with extra magic
to ignore no_reg registers (to reduce ia32 special casing). The
CallInterfaceDescriptorData is initialized based on these static
functions, rather than manual per-descriptor initializers.

This allows us to skip loading descriptors dynamically for CallBuiltin
in Sparkplug, and instead lets us use a bit of template magic to
statically set up arguments for the calls. Any other users of statically
known descriptors will also benefit, thanks to C++ picking the static
methods over the dynamic methods on the base class when available.

Because we can remove various virtual functions and trigger heavier
inlining of constantly known values, binary size slightly decreases with
this change.

Note that torque-generated descriptors are changed to use the same magic,
rather than having Torque-specific magic, for consistency.

Bug: v8:11420
Change-Id: Icc5e238b6313a08734feb564204a13226b450c22
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2814518
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: 's avatarNico Hartmann <nicohartmann@chromium.org>
Reviewed-by: 's avatarClemens Backes <clemensb@chromium.org>
Reviewed-by: 's avatarIgor Sheludko <ishell@chromium.org>
Reviewed-by: 's avatarJakob Gruber <jgruber@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73996}
      ae0752df
  13. 29 Mar, 2021 1 commit
  15. 23 Mar, 2021 1 commit
    • Manos Koukoutos's avatar
      [turbofan] Introduce LoadImmutable, use it in wasm compiler · f6ee9ed0
      Manos Koukoutos authored 
      LoadImmutable represents a load from a position in memory that is known
to be immutable, e.g. an immutable IsolateRoot or an immutable field of
a WasmInstanceObject. Because the returned value cannot change through
the execution of a function, LoadImmutable is a pure operator and does
not have effect or control edges.
This will allow more aggressive optimizations of loads of fields of
the Isolate and Instance that are known to be immutable.
Requires that the memory in question has been initialized at function
start even through inlining.

Note: We may reconsider this approach once we have escape analysis for
wasm, and replace it with immutable load/initialize operators that live
inside the effect chain and are less restriced.

Bug: v8:11510
Change-Id: I5e8e4f27d7008f39f01175ffa95a9c531ba63e66
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2775568Reviewed-by: 's avatarAndreas Haas <ahaas@chromium.org>
Reviewed-by: 's avatarGeorg Neis <neis@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73594}
      f6ee9ed0
  17. 08 Mar, 2021 1 commit
  19. 26 Feb, 2021 1 commit
  21. 01 May, 2020 1 commit
  23. 25 Feb, 2020 1 commit
  25. 10 Sep, 2019 1 commit
  27. 21 Aug, 2019 1 commit
  29. 23 May, 2019 1 commit
  31. 21 May, 2019 1 commit
  33. 22 Mar, 2019 1 commit
  35. 14 Aug, 2018 2 commits
    • Benedikt Meurer's avatar
      [turbofan] Further optimize DataView accesses. · 5fecd146
      Benedikt Meurer authored 
      This adds support for unaligned load/store access to the DataView
backing store and uses byteswap operations to fix up the endianess
when necessary. This changes the Word32ReverseBytes operator to be
a required operator and adds the missing support on the Intel and
ARM platforms (on 64-bit platforms the Word64ReverseBytes operator
is also mandatory now).

This further improves the performance on the dataviewperf.js test
mentioned in the tracking bug by up to 40%, and at the same time
reduces the code complexity in the EffectControlLinearizer.

Bug: chromium:225811
Change-Id: I7c1ec826faf46a144a5a9068f8f815a5fd040997
Reviewed-on: https://chromium-review.googlesource.com/1174252Reviewed-by: 's avatarSigurd Schneider <sigurds@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55111}
      5fecd146
    • Leszek Swirski's avatar
      Revert "[turbofan] Further optimize DataView accesses." · 6a62d88e
      Leszek Swirski authored 
      This reverts commit c46915b9.

Reason for revert: Disasm failures https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Linux%20-%20debug/21727 

Original change's description:
> [turbofan] Further optimize DataView accesses.
> 
> This adds support for unaligned load/store access to the DataView
> backing store and uses byteswap operations to fix up the endianess
> when necessary. This changes the Word32ReverseBytes operator to be
> a required operator and adds the missing support on the Intel and
> ARM platforms (on 64-bit platforms the Word64ReverseBytes operator
> is also mandatory now).
> 
> This further improves the performance on the dataviewperf.js test
> mentioned in the tracking bug by up to 40%, and at the same time
> reduces the code complexity in the EffectControlLinearizer.
> 
> Bug: chromium:225811
> Change-Id: I296170b828c2ccc1c317ed37840b564aa14cdec2
> Reviewed-on: https://chromium-review.googlesource.com/1172777
> Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
> Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#55099}

TBR=sigurds@chromium.org,bmeurer@chromium.org

Change-Id: If7a62e3a1a4ad26823fcbd2ab6eb4c053ad11c49
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:225811
Reviewed-on: https://chromium-review.googlesource.com/1174171Reviewed-by: 's avatarLeszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55107}
      6a62d88e
  37. 13 Aug, 2018 1 commit
    • Benedikt Meurer's avatar
      [turbofan] Further optimize DataView accesses. · c46915b9
      Benedikt Meurer authored 
      This adds support for unaligned load/store access to the DataView
backing store and uses byteswap operations to fix up the endianess
when necessary. This changes the Word32ReverseBytes operator to be
a required operator and adds the missing support on the Intel and
ARM platforms (on 64-bit platforms the Word64ReverseBytes operator
is also mandatory now).

This further improves the performance on the dataviewperf.js test
mentioned in the tracking bug by up to 40%, and at the same time
reduces the code complexity in the EffectControlLinearizer.

Bug: chromium:225811
Change-Id: I296170b828c2ccc1c317ed37840b564aa14cdec2
Reviewed-on: https://chromium-review.googlesource.com/1172777
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: 's avatarSigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55099}
      c46915b9
  39. 07 May, 2018 1 commit
  41. 27 Apr, 2018 1 commit
    • Clemens Hammacher's avatar
      [wasm] Split off wasm-linkage.h · 8466b71a
      Clemens Hammacher authored 
      Linkage-related methods were declared in wasm-compiler.h and
implemented in wasm-linkage.cc. This required all users of e.g. wasm
call descriptors to include the whole wasm compiler header. Also, some
wasm linkage information is independent of turbofan and also used
outside of the compiler directory.

This CL splits off wasm-linkage.h (with minimal includes) and puts it
in src/wasm. This allows to use that information without including
compiler headers (will clean up several uses in follow-up CLs).

R=mstarzinger@chromium.org, titzer@chromium.org

Bug: v8:7570
Change-Id: Ifcae70b4ea7932cda30953b325c2b87c4176c598
Reviewed-on: https://chromium-review.googlesource.com/1013701Reviewed-by: 's avatarBen Titzer <titzer@chromium.org>
Reviewed-by: 's avatarMichael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52849}
      8466b71a
  43. 16 Apr, 2018 1 commit
  45. 21 Mar, 2018 1 commit
  47. 05 Mar, 2018 1 commit
  49. 09 Feb, 2018 1 commit
  51. 02 Dec, 2017 1 commit
    • Mathias Bynens's avatar
      Normalize casing of hexadecimal digits · 822be9b2
      Mathias Bynens authored 
      This patch normalizes the casing of hexadecimal digits in escape
sequences of the form `\xNN` and integer literals of the form
`0xNNNN`.

Previously, the V8 code base used an inconsistent mixture of uppercase
and lowercase.

Google’s C++ style guide uses uppercase in its examples:
https://google.github.io/styleguide/cppguide.html#Non-ASCII_Characters

Moreover, uppercase letters more clearly stand out from the lowercase
`x` (or `u`) characters at the start, as well as lowercase letters
elsewhere in strings.

BUG=v8:7109
TBR=marja@chromium.org,titzer@chromium.org,mtrofin@chromium.org,mstarzinger@chromium.org,rossberg@chromium.org,yangguo@chromium.org,mlippautz@chromium.org
NOPRESUBMIT=true

Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I790e21c25d96ad5d95c8229724eb45d2aa9e22d6
Reviewed-on: https://chromium-review.googlesource.com/804294
Commit-Queue: Mathias Bynens <mathias@chromium.org>
Reviewed-by: 's avatarJakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49810}
      822be9b2
  53. 28 Sep, 2017 1 commit
    • Enrico Bacis's avatar
      [wasm] Introduce the WasmContext · 6cd7a5a7
      Enrico Bacis authored 
      The WasmContext struct introduced in this CL is used to store the
mem_size and mem_start address of the wasm memory. These variables can
be accessed at C++ level at graph build time (e.g., initialized during
instance building). When the GrowMemory runtime is invoked, the context
variables can be changed in the WasmContext at C++ level so that the
generated code will load the correct values.

This requires to insert a relocatable pointer only in the
JSToWasmWrapper (and in the other wasm entry points), the value is then
passed from function to function as an automatically added additional
parameter. The WasmContext is then dropped when creating an Interpreter
Entry or when invoking a JavaScript function. This removes the need of
patching the generated code at runtime (i.e., when the memory grows)
with respect to WASM_MEMORY_REFERENCE and WASM_MEMORY_SIZE_REFERENCE.
However, we still need to patch the code at instance build time to patch
the JSToWasmWrappers; in fact the address of the WasmContext is not
known during compilation, but only when the instance is built.

The WasmContext address is passed as the first parameter. This has the
advantage of not having to move the WasmContext around if the function
does not use many registers. This CL also changes the wasm calling
convention so that the first parameter register is different from the
return value register. The WasmContext is attached to every
WasmMemoryObject, to share the same context with multiple instances
sharing the same memory. Moreover, the nodes representing the
WasmContext variables are cached in the SSA environment, similarly to
other local variables that might change during execution.  The nodes are
created when initializing the SSA environment and refreshed every time a
grow_memory or a function call happens, so that we are sure that they
always represent the correct mem_size and mem_start variables.

This CL also removes the WasmMemorySize runtime (since it's now possible
to directly retrieve mem_size from the context) and simplifies the
GrowMemory runtime (since every instance now has a memory_object).

R=ahaas@chromium.org,clemensh@chromium.org
CC=gdeepti@chromium.org

Change-Id: I3f058e641284f5a1bbbfc35a64c88da6ff08e240
Reviewed-on: https://chromium-review.googlesource.com/671008
Commit-Queue: Enrico Bacis <enricobacis@google.com>
Reviewed-by: 's avatarClemens Hammacher <clemensh@chromium.org>
Reviewed-by: 's avatarAndreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48209}
      6cd7a5a7
  55. 27 Jun, 2017 1 commit
  57. 16 May, 2017 1 commit
  59. 07 Mar, 2017 1 commit
    • clemensh's avatar
      [wasm] Fix interpreter entry for i64 return type · 6cf8f54d
      clemensh authored 
      Fix two issues in the interpreter entry for 64 bit return values on
32 bit platforms. First, the effect chain was slightly incorrect, second
the order of the returned values was wrong.

Also add a test case for this.
Tested on x64, ia32 and s390.

Plus drive-by fix in Int64Lowering to reuse global constants for
big-endian/little-endian disambiguation.

R=titzer@chromium.org
BUG=v8:5822

Review-Url: https://codereview.chromium.org/2731713002
Cr-Commit-Position: refs/heads/master@{#43654}
      6cf8f54d
  61. 13 Feb, 2017 1 commit
  63. 01 Feb, 2017 1 commit
    • ahaas's avatar
      [wasm] Change the default lowering of stores. · dd51dd92
      ahaas authored 
      The int64-lowering only lowered store instructions with a word64 store
representation. For all other stores the default lowering applied. The
default lowering replaces all input nodes with both their replacement
nodes, which can change the number of input nodes of the lowered node.

In WebAssembly there exist stores which take an I64 input and store it
with a different representation, e.g. I32. In TurboFan this translates
to a store node with word32 store representation and a word64 value
input. The default lowering replaces the word64 value input to become
two word32 value inputs, which makes the number of inputs of the store
node invalid. This CL discards the high word replacement of the value
input so that the number of input nodes of a store node does not change
in the default lowering.

R=titzer@chromium.org
CC=rossberg@chromium.org

BUG=

Review-Url: https://codereview.chromium.org/2668023004
Cr-Commit-Position: refs/heads/master@{#42860}
      dd51dd92
  65. 11 Jan, 2017 1 commit
  67. 17 Nov, 2016 1 commit
  69. 02 Nov, 2016 2 commits
    • danno's avatar
      [turbofan] Support variable size argument removal in TF-generated functions · fe552636
      danno authored 
      This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.

The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
  slots to pop upon return in addition to those specified by the Linkage of the
  compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
  handles all tail-call cases except where the return value type differs, this fallback
  was not really useful and in fact caused unexpected behavior with variable
  sized argument popping, since it wasn't possible to materialize a Return node
  with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
  pop argument since the variable pop functionality

LOG=N

Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40699}
      fe552636
    • machenbach's avatar
      Revert of [turbofan] Support variable size argument popping in TF-generated... · c61902e0
      machenbach authored 
      Revert of [turbofan] Support variable size argument popping in TF-generated functions (patchset #13 id:240001 of https://codereview.chromium.org/2446543002/ )

Reason for revert:
Seems to break arm64 sim debug and blocks roll:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20debug/builds/3294

Original issue's description:
> [turbofan] Support variable size argument removal in TF-generated functions
>
> This is preparation for using TF to create builtins that handle variable number of
> arguments and have to remove these arguments dynamically from the stack upon
> return.
>
> The gist of the changes:
> - Added a second argument to the Return node which specifies the number of stack
>   slots to pop upon return in addition to those specified by the Linkage of the
>   compiled function.
> - Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
>   handles all tail-call cases except where the return value type differs, this fallback
>   was not really useful and in fact caused unexpected behavior with variable
>   sized argument popping, since it wasn't possible to materialize a Return node
>   with the right pop count from the TailCall without additional context.
> - Modified existing Return generation to pass a constant zero as the additional
>   pop argument since the variable pop functionality
>
> LOG=N

TBR=bmeurer@chromium.org,mstarzinger@chromium.org,epertoso@chromium.org,danno@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
NOPRESUBMIT=true

Review-Url: https://codereview.chromium.org/2473643002
Cr-Commit-Position: refs/heads/master@{#40691}
      c61902e0
  71. 31 Oct, 2016 1 commit
    • danno's avatar
      [turbofan] Support variable size argument removal in TF-generated functions · 5319b50c
      danno authored 
      This is preparation for using TF to create builtins that handle variable number of
arguments and have to remove these arguments dynamically from the stack upon
return.

The gist of the changes:
- Added a second argument to the Return node which specifies the number of stack
  slots to pop upon return in addition to those specified by the Linkage of the
  compiled function.
- Removed Tail -> Non-Tail fallback in the instruction selector. Since TF now should
  handles all tail-call cases except where the return value type differs, this fallback
  was not really useful and in fact caused unexpected behavior with variable
  sized argument popping, since it wasn't possible to materialize a Return node
  with the right pop count from the TailCall without additional context.
- Modified existing Return generation to pass a constant zero as the additional
  pop argument since the variable pop functionality

LOG=N

Review-Url: https://codereview.chromium.org/2446543002
Cr-Commit-Position: refs/heads/master@{#40678}
      5319b50c