- 26 May, 2020 14 commits
-
-
Marton Balint authored
Signed-off-by: Marton Balint <cus@passwd.hu>
-
Lynne authored
We want to copy the lowest amount of bytes per line, but while the buffer stride is sanitized, the src/dst stride can be negative, and negative numbers of bytes do not make a lot of sense.
-
Lynne authored
By popular request. Does the same as in libopusenc.
-
Lynne authored
-
Lynne authored
-
Lynne authored
Some vendors (AMD) require dedicated allocation to be used for all imported images.
-
Lynne authored
Otherwise, the frames context is considered to be ready to handle mapping, and it doesn't get initialized the normal way through .frames_init.
-
Lynne authored
-
Lynne authored
Speeds up both use cases by 30%.
-
Lynne authored
By default now, if AV_EF_CRCCHECK or AV_EF_IGNORE_ERR are enabled the decoder will skip the chunk and carry on with the next one. This should make the decoder able to decode more corrupt files because the functions which decode individual chunks will very likely error out if fed invalid data and stop the decoding of the entire image.
-
Lynne authored
A lot of files have CRC included. The CRC only covers 34 bytes at most from the frame but it should still be enough for some amount of error detection.
-
Lynne authored
The CRC flag is only signalled once every few minutes but CRC is still always present so the patch uses the file version instead. CRC on 24-bit files wants non-padded samples so skip such files. Some corrupt samples may have been output before the final check depending on the -max_samples setting.
-
Andreas Rheinhardt authored
The size of a single allocation performed by av_malloc() or av_realloc() is supposed to be bounded by max_alloc_size, which defaults to INT_MAX and can be set by the user; yet currently this is not completely honoured: The actual value used is max_alloc_size - 32. How this came to be can only be understood historically: a) 0ecca7a4 disallowed allocations > INT_MAX. At that time the size parameter of av_malloc() was an unsigned and the commentary added ("lets disallow possible ambiguous cases") indicates that this was done as a precaution against calling the functions with negative int values. Genuinely limiting the size of allocations to INT_MAX doesn't seem to have been the intention given that at this time the memalign hack introduced in commit da9b170c (which when enabled increased the size of allocations slightly so that one can return a correctly aligned pointer that actually does not point to the beginning of the allocated buffer) was already present. b) Said memalign hack allocated 17 bytes more than actually desired, yet allocating 16 bytes more is actually enough and so this was changed in a9493601; this commit also replaced INT_MAX by INT_MAX - 16 (and made the limit therefore a limit on the size of the allocated buffer), but kept the comment, although there is nothing ambiguous about allocating (INT_MAX - 16)..INT_MAX. c) 13dfce3d then increased 16 to 32 for AVX, 6b4c0be5 replaced INT_MAX by MAX_MALLOC_SIZE (which was of course defined to be INT_MAX) and 5a8e9942 added max_alloc_size and made it user-selectable. d) 4fb311c8 then dropped the memalign hack, yet it kept the -32 (probably because the comment about ambiguous cases was still present?), although it is no longer needed at all after this commit. Therefore this commit removes it and uses max_alloc_size directly. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
Andreas Rheinhardt authored
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
- 25 May, 2020 10 commits
-
-
Michael Niedermayer authored
Fixes: memleak Fixes: 19949/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5743636058210304 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>
-
Matthieu Bouron authored
-
James Almer authored
Call the encoder's internal AVCodec.encode2() function instead. Signed-off-by: James Almer <jamrial@gmail.com>
-
Andreas Rheinhardt authored
It avoids leaving dangling pointers behind in memory. Also remove redundant checks for whether the URLContext to be closed is already NULL. Reviewed-by: Anton Khirnov <anton@khirnov.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
Mattias Wadman authored
Some flac muxers write truncated metadata picture size if the picture data do not fit in 24 bits. Detect this by truncting the size found inside the picture block and if it matches the block size use it and read rest of picture data. This workaround is only for flac files and not ogg files with flac METADATA_BLOCK_PICTURE comments and it can be disabled with strict level above normal. Currently there is a 500MB limit on truncate size to protect from large memory allocations. The truncation bug in lavf flacenc was fixed in e447a4d1 but based on existing broken files other unknown flac muxers seems to truncate also. Before the fix a broken flac file for reproduction could be generated with: ffmpeg -f lavfi -i sine -f lavfi -i color=red:size=2400x2400 -map 0:0 -map 1:0 -c:v:0 bmp -disposition:1 attached_pic -t 1 test.flac Fixes ticket 6333 Signed-off-by: Anton Khirnov <anton@khirnov.net>
-
Anton Khirnov authored
-
Anton Khirnov authored
-
Andreas Rheinhardt authored
ff_id3v2_parse_apic/chapters/priv/priv_dict all had a parameter extra_meta of type ID3v2ExtraMeta ** as if the functions wanted to make *extra_meta point to something else. But they don't, so just use an ID3v2ExtraMeta *. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
Andreas Rheinhardt authored
Up until now, the ID3v2ExtraMeta structure (which is used when parsing ID3v2 tags containing attached pictures, chapters etc.) contained a pointer to separately allocated data that depended on the type of the tag. Yet the difference of the sizes of the largest and the smallest of these structures is fairly small, so that it is better to simply include a union of all the possible types of tag-dependent structures in ID3v2ExtraMeta. This commit implements this. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
Andreas Rheinhardt authored
If the write_id3v2 option is set, the aiff muxer would write id3v2 tags if there is global metadata or if there are attached pics to write. Chapters are ignored in this check that precedes writing id3v2 tags. Yet 47ac3449 added support for writing chapters as id3v2 tags, so one should check for the existence of chapters, too; otherwise the chapters would only be written in case there is global metadata or an attached pic. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
- 24 May, 2020 1 commit
-
-
James Almer authored
It's not a decoding exclusive function anymore. Signed-off-by: James Almer <jamrial@gmail.com>
-
- 23 May, 2020 15 commits
-
-
Andreas Rheinhardt authored
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
Andreas Rheinhardt authored
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
Andreas Rheinhardt authored
Reviewed-by: James Almer <jamrial@gmail.com> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
-
Martin Storsjö authored
Just including icodecapi.h + codecapi.h apparently misses some bits, that MSVC doesn't complain about, but Clang does. Thus add a missing header to the custom hacky include path (required for keeping ICodecAPI visible when building in UWP mode, as it is intended to). The issue in Windows SDK headers about ICodecAPI availability in UWP/app mode has been reported upstream at https://developercommunity.visualstudio.com/content/problem/1037125/icodecapi-not-visible-when-compiling-in-uwp-mode.html, and later also filed in Feedback Hub (which can't be linked to externally). Signed-off-by: Martin Storsjö <martin@martin.st>
-
Lynne authored
This should significantly improve the performance with certain filterchains.
-
Lynne authored
-
Lynne authored
Otherwise custom vulkan device contexts won't work.
-
Lynne authored
This allows us to speed up only-uploading or only-downloading use cases.
-
Lynne authored
They're nothing special, and there's no reason they should always use the default flags.
-
Lynne authored
Some users may need special formats that aren't available when the STORAGE flag bit is set, which would result in allocations failing.
-
Lynne authored
This was never actually used, likely due to confusion, as the device context also had one used for uploads and downloads. Also, since we're only using it for very quick image barriers (which are practically free on all hardware), use the compute queue instead of the transfer queue.
-
Lynne authored
If an external pool was provided we skipped all of frames init, including the exec context.
-
Lynne authored
This commit makes full use of the enabled queues to provide asynchronous uploads of images (downloads remain synchronous). For a pure uploading use cases, the performance gains can be significant.
-
Lynne authored
Makes it easier to support multiple queues
-
Lynne authored
Some things like using ImageLists were from a really old version that still used multiplanar images.
-