This was marked as deprecated (but only in the doxygen, not with an
actual deprecation attribute) in 81c623fa in 2011, but was
undeprecated in ad1ee5fa.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Add error handle if av_image_fill_pointers fail.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>

This is needed because of 32bit float formats (which are difficult to
store in 16bits)

This also fixes undefined behavior found by fate
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Found-by: fate
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Create SMPTE ST 12-1 timecodes based on H.264 SEI picture timing
info.

For framerates > 30 FPS, the field flag is used in conjunction with
pairs of frames which contain the same frame timestamp in S12M.
Ensure the field is properly set per the spec.

Libmfx requires 16 bytes aligned input/output for uploading.
Currently only output is 16 byte aligned and assigning same width/height to
input with smaller buffer size actually, thus definitely will cause segment fault.

Can reproduce with any 1080p nv12 rawvideo input:
ffmpeg -init_hw_device qsv=qsv:hw -hwaccel qsv -filter_hw_device qsv -f rawvideo -pix_fmt nv12 -s:v 1920x1080
-i 1080p_nv12.yuv -vf 'format=nv12,hwupload=extra_hw_frames=16,hwdownload,format=nv12' -an -y out_nv12.yuv

It can fix #7418
Signed-off-by: Zhong Li <zhong.li@intel.com>

RGB32(AV_PIX_FMT_BGRA on intel platforms) format may be used as overlay with alpha blending.
So add AV_PIX_FMT_BGRA format support.

One example of alpha blending overlay: ffmpeg -hwaccel qsv -c:v h264_qsv -i BA1_Sony_D.jsv
-filter_complex 'movie=lena-rgba.png,hwupload=extra_hw_frames=16[a];[0:v][a]overlay_qsv=x=10:y=10'
-c:v h264_qsv -y out.mp4

Rename RGB32 to be BGRA to make it clearer as Mark Thompson's suggestion.

V2: Add P010 format support else will introduce HEVC 10bit encoding regression.
    Thanks for LinJie's discovery.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Verified-by: Fu, Linjie <linjie.fu@intel.com>

Signed-off-by: Marton Balint <cus@passwd.hu>

Also properly return AVERROR(ERANGE) in case of actual overflows.
Signed-off-by: Marton Balint <cus@passwd.hu>

Signed-off-by: Marton Balint <cus@passwd.hu>

Variable 'ret' hasn't been initialized，thus introducing a random
hwupload failure regression due to qsv session uninitialized.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Give the entries in the VAAPI format map table an explicit type and add
functions to do the necessary lookups.  Add another field to this table
indicating whether the chroma planes are swapped (as in YV12), and use
that rather than explicit comparisons where swapping is needed.

Clarify that the list is the naughty list, and therefore being on it is
not desirable.  The i965 driver does not need to be on the list after
version 2.0 (when the standard parameter buffer rendering behaviour was
changed).

Add missing conversions from side data enum to name.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>

~3x to 5x faster.
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Marton Balint <cus@passwd.hu>

Simplify macro TRANSPOSE_4H in mmiutils.h and add TRANSPOSE_8B as a common macro.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Optimize vp8 loop filter with mmi, four functions optimized:
1. ff_vp8_h_loop_filter8uv_mmi.
2. ff_vp8_v_loop_filter8uv_mmi.
3. ff_vp8_h_loop_filter16_mmi.
4. ff_vp8_v_loop_filter16_mmi.

Vp8 decoding speed improved about 50%(from 73fps to 110fps, Tested on loongson 3A3000).
Signed-off-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Removing unused VPP sessions by initializing only when used in order to help
reduce CPU utilization.

Thanks to Maxym for the guidance.
Signed-off-by: Joe Olivas <joseph.k.olivas@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Performance of mpeg4 decoding improved about 23%(from 128fps to 158fps, tested on loongson 3A3000).
Reoptimized following functions with mmi.
1. ff_simple_idct_put_8_mmi
2. ff_simple_idct_add_8_mmi
3. ff_simple_idct_8_mmi
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Found by Chrome's ClusterFuzz: https://crbug.com/873693Signed-off-by: Jacob Trimble <modmaker@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: James Almer <jamrial@gmail.com>

Should fix compilation with old yasm/nasm
Signed-off-by: James Almer <jamrial@gmail.com>

add ff_pixelutils_sad_32x32_sse2, ff_pixelutils_sad_{a,u}_32x32_sse2,
ff_pixelutils_sad_32x32_avx22, ff_pixelutils_sad_{a,u}_32x32_avx2

use perf record/report profiling, get instructions:u for avx2 sad_32x32:

  72.05%  pixelutils  pixelutils     [.] block_sad_32x32_c
  18.50%  pixelutils  pixelutils     [.] block_sad_16x16_c
   4.78%  pixelutils  pixelutils     [.] block_sad_8x8_c
   2.69%  pixelutils  pixelutils     [.] block_sad_4x4_c
   0.89%  pixelutils  pixelutils     [.] block_sad_2x2_c
   0.16%  pixelutils  pixelutils     [.] ff_pixelutils_sad_32x32_avx2
   0.16%  pixelutils  pixelutils     [.] ff_pixelutils_sad_u_32x32_avx2
   0.12%  pixelutils  pixelutils     [.] ff_pixelutils_sad_a_32x32_avx2

sse2 sad_32x32 instructions:u like:

  71.86%  pixelutils  pixelutils     [.] block_sad_32x32_c
  18.42%  pixelutils  pixelutils     [.] block_sad_16x16_c
   4.81%  pixelutils  pixelutils     [.] block_sad_8x8_c
   2.68%  pixelutils  pixelutils     [.] block_sad_4x4_c
   0.88%  pixelutils  pixelutils     [.] block_sad_2x2_c
   0.29%  pixelutils  pixelutils     [.] ff_pixelutils_sad_32x32_sse2
   0.26%  pixelutils  pixelutils     [.] ff_pixelutils_sad_u_32x32_sse2
   0.23%  pixelutils  pixelutils     [.] ff_pixelutils_sad_a_32x32_sse2
Signed-off-by: Jun Zhao <mypopydev@gmail.com>

add sad_32x32 in pixelutils API, and update the fate.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>

libavutil/hwcontext_d3d11va.c: In function 'd3d11va_device_create':
libavutil/hwcontext_d3d11va.c:554:46: warning: passing argument 2 of 'pAdapter->lpVtbl->GetDesc' from incompatible pointer type [-Wincompatible-pointer-types]
         hr = IDXGIAdapter2_GetDesc(pAdapter, &desc);
                                              ^
libavutil/hwcontext_d3d11va.c:554:46: note: expected 'DXGI_ADAPTER_DESC * {aka struct DXGI_ADAPTER_DESC *}' but argument is of type 'DXGI_ADAPTER_DESC2 * {aka struct DXGI_ADAPTER_DESC2 *}'
Reviewed-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Jun Zhao <mypopydev@gmail.com>

remove an unused variable
Signed-off-by: Jun Zhao <mypopydev@gmail.com>

In opencl device derived case, don't need to call opencl_device_init.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>

opencl_vaapi_intel_media doesn't depend on libmfx, OpenCL Drivers
and Runtimes for Intel Architectureis is a standalone release, more
information can be found in the link:
https://software.intel.com/en-us/articles/opencl-drivers.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>

Signed-off-by: Jacob Trimble <modmaker@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>