Missed in c17f4761 and
8bbd8c8dSigned-off-by: James Almer <jamrial@gmail.com>

Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

According to EBU tech 3285 supplement 3 the dwPosPeakOfPeaks field
should contain the absolute position to the maximum audio sample value,
but the current implementation writes the relative peak frame index
instead.

Fix the issue by writing the "unknown" value (-1) for now until the
feature is implemented correctly.

Previous version reviewed-by: Peter Bubestinger <p.bubestinger@av-rd.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>

Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>

Based on mail from IRT
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Paras Chadha <paraschadha18@gmail.com>

Since there is no information about the source format, "unspecified"
is the correct value to write here.

All tests using the MPEG-2 encoder are updated, as this changes the
header on all outputs.

This improves the quality and reduces the "blocking" in flat areas
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This reverts commit 04aa09c4
and reintroduces 0ff5567a that
was temporarily reverted due to minor regressions.

It also reverts e5bce8b4 that fixed FATE refs.
The fate-ffm change is caused by field_order now being set
on the output format because the first frame arrives earlier.
The fate-mxf change is assumed to be the same.

<@jamrial> durandal_1707: 04aa09c4 broke fate-lavf-ffm and fate-lavf-mxf
<@durandal_1707> how so?
<@jamrial> one byte changes
<@durandal_1707> jamrial: just update checksums
<@jamrial> durandal_1707: but why did they change at all? the commit you reverted didn't affect them
<@jamrial> why does reverting it affect these tests?
<@jamrial> i don't think updating the checksum without knowing what changed is a good idea
<@durandal_1707> jamrial: the lavfi core is in weird state after removal of recursive code
<@durandal_1707> jamrial: the change is that older ones would get progressive flag set and new one doesnt
<@jamrial> alright

As it gives excellent encoding gains at an insignificant speed increase
and passes fate without problems, it should now be safe to enable by
default.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

better quality without speedloss
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>

this gives better frequency response

update swresample fate and other fates
that depend on resampling
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>

This makes sure the actual stream parameters are used, which is
important mainly for hardware decoding+filtering cases, which would
previously require various weird workarounds to handle the fact that a
fake software graph has to be constructed, but never used.
This should also improve behaviour in rare cases where
avformat_find_stream_info() does not provide accurate information.

This merges Libav commit a3a0230a. It was previously skipped.

The code in flush_encoders() which sets up a "fake" format wasn't in
Libav. I'm not sure if it's a good idea, but it tends to give
behavior closer to the old one in certain corner cases.

The vp8-size-change gives different result, because now the size of
the first frame is used. libavformat reported the size of the largest
frame for some reason.

The exr tests now use the sample aspect ratio of the first frame. For
some reason libavformat determines 0/1 as aspect ratio, while the
decoder returns the correct one.

The ffm and mxf tests change the field_order values. I'm assuming
another libavformat/decoding mismatch.
Signed-off-by: wm4 <nfxjfg@googlemail.com>

Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

According to the spec[1], a value of 0 means the footer is present and a value
of 1 means it's absent, the exact opposite of header presence flag where 1
means present and 0 absent.
The reason for this is compatibility with APEv1 tags, where there's no header,
footer presence was mandatory for all files, and the flags field was a zeroed
reserved field.

[1] http://wiki.hydrogenaud.io/index.php?title=Ape_Tags_FlagsReviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

This would be simpler if codecpar supported AVOptions
modern ffserver should be unaffected by this, older ffserver which required the
muxer to directly access the encoder could have issues with this, but this
direct access is just wrong and unsafe
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This accesses the private encoder context, it should not be used by
the current ffserver it may affect old ffserver versions but i believe
there is consens that accessing the private encoder context from the muxer
is completely wrong.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes remuxing apng streams coming from the apng demuxer, which sends extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>

This reverts commit e0c6b320.

Said commit changed the behavior of the demuxer and decoder in a non
backwards compatible way.
Demuxers should make extradata available at init if possible, and send
new extradata as side data within a packet if needed.

A better fix for the remuxing crash will follow.
Signed-off-by: James Almer <jamrial@gmail.com>

Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

Also test the fallback to png creation for a single frame.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

The dynamic buffer does not contain the CRC32 element so calls to avio_tell()
don't take it into account. This resulted in CueRelativePosition values being
six bytes short.
This is a regression since 6724525a

Instead of adding yet another custom check for CRC32 to fix a size or an offset,
remove the existing ones and reserve the six bytes in the dynamic buffer.
Signed-off-by: James Almer <jamrial@gmail.com>

We don't currently support values 1 (centimeters), 2 (inches) or 3 (DAR),
only the default value 0 (pixels) which doesn't need to be written.

The fate refs are updated as unknown SAR is now signaled in the output
files with the addition of the new element.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Attachment tags were being written targeting non-existent streams in the
output file.
Also filter filename and mimetype entries, as they are standard elements
in the Attachment master.
Signed-off-by: James Almer <jamrial@gmail.com>

Finishes implementing ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

This commit is largely based on commit 15e84ed3 from Anton Khirnov
<anton@khirnov.net> which was previously skipped in bbf5ef9d.

There are still a bunch of things raising codecpar related warnings that
need fixing, such as:
- the use of codec->debug in the interactive debug mode
- read_ffserver_streams(): it's probably broken now but there is no test
- lowres stuff
- codec copy apparently required by bitstream filters

The matroska references are updated because they now properly forward
the field_order (previously unknown, now progressive).

Thanks to James Almer for fixing a bunch of FATE issues in this commit.
Signed-off-by: Clément Bœsch <clement@stupeflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Martin Storsjö <martin@martin.st>