This is cherrypicked from libav commit
07b5136c.
Signed-off-by: Martin Storsjö <martin@martin.st>

This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.

This is cherrypicked from libav commit
b0806088.
Signed-off-by: Martin Storsjö <martin@martin.st>

This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.

This is cherrypicked from libav commit
e18c3900.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
435cd7bc.
Signed-off-by: Martin Storsjö <martin@martin.st>

Previously we first calculated hev, and then negated it.

Since we were able to schedule the negation in the middle
of another calculation, we don't see any gain in all cases.

Before:                     Cortex A7      A8      A9     A53  A53/AArch64
vp9_loop_filter_v_4_8_neon:     147.0   129.0   115.8    89.0         88.7
vp9_loop_filter_v_8_8_neon:     242.0   198.5   174.7   140.0        136.7
vp9_loop_filter_v_16_8_neon:    500.0   419.5   382.7   293.0        275.7
vp9_loop_filter_v_16_16_neon:   971.2   825.5   731.5   579.0        453.0
After:
vp9_loop_filter_v_4_8_neon:     143.0   127.7   114.8    88.0         87.7
vp9_loop_filter_v_8_8_neon:     241.0   197.2   173.7   140.0        136.7
vp9_loop_filter_v_16_8_neon:    497.0   419.5   379.7   293.0        275.7
vp9_loop_filter_v_16_16_neon:   965.2   818.7   731.4   579.0        452.0

This is cherrypicked from libav commit
e1f9de86.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

Before:                           Cortex A53
vp9_inv_dct_dct_16x16_sub1_add_neon:   235.3
vp9_inv_dct_dct_32x32_sub1_add_neon:   555.1
After:
vp9_inv_dct_dct_16x16_sub1_add_neon:   180.2
vp9_inv_dct_dct_32x32_sub1_add_neon:   475.3

This is cherrypicked from libav commit
3fcf788f.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

Before:                            Cortex A7      A8      A9     A53
vp9_inv_dct_dct_16x16_sub1_add_neon:   273.0   189.5   211.7   235.8
vp9_inv_dct_dct_32x32_sub1_add_neon:   752.0   459.2   862.2   553.9
After:
vp9_inv_dct_dct_16x16_sub1_add_neon:   226.5   145.0   225.1   171.8
vp9_inv_dct_dct_32x32_sub1_add_neon:   721.2   415.7   727.6   475.0

This is cherrypicked from libav commit
a76bf8cf.
Signed-off-by: Martin Storsjö <martin@martin.st>

No measured speedup on a Cortex A53, but other cores might benefit.

This is cherrypicked from libav commit
388e0d25.
Signed-off-by: Martin Storsjö <martin@martin.st>

Before:                    Cortex A7      A8     A9     A53
vp9_put_8tap_smooth_4h_neon:   378.1   273.2  340.7   229.5
After:
vp9_put_8tap_smooth_4h_neon:   352.1   222.2  290.5   229.5

This is cherrypicked from libav commit
fea92a4b.
Signed-off-by: Martin Storsjö <martin@martin.st>

Fold the field lengths into the macro.

This makes the macro invocations much more readable, when the
lines are shorter.

This also makes it easier to use only half the registers within
the macro.

This is cherrypicked from libav commit
5e0c2158.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
0c0b87f1.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
8476eb0d.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
3dd78272.
Signed-off-by: Martin Storsjö <martin@martin.st>

The ld1r is a leftover from the arm version, where this trick is
beneficial on some cores.

Use a single-lane load where we don't need the semantics of ld1r.

This is cherrypicked from libav commit
ed8d2933.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
4da4b2b8.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
3933b86b.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This avoids loading and calculating coefficients that we know will
be zero, and avoids filling the temp buffer with zeros in places
where we know the second pass won't read.

This gives a pretty substantial speedup for the smaller subpartitions.

The code size increases from 14740 bytes to 24292 bytes.

The idct16/32_end macros are moved above the individual functions; the
instructions themselves are unchanged, but since new functions are added
at the same place where the code is moved from, the diff looks rather
messy.

Before:
vp9_inv_dct_dct_16x16_sub1_add_neon:     236.7
vp9_inv_dct_dct_16x16_sub2_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub4_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub8_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub12_add_neon:   1387.4
vp9_inv_dct_dct_16x16_sub16_add_neon:   1387.6
vp9_inv_dct_dct_32x32_sub1_add_neon:     554.1
vp9_inv_dct_dct_32x32_sub2_add_neon:    5198.5
vp9_inv_dct_dct_32x32_sub4_add_neon:    5198.6
vp9_inv_dct_dct_32x32_sub8_add_neon:    5196.3
vp9_inv_dct_dct_32x32_sub12_add_neon:   6183.4
vp9_inv_dct_dct_32x32_sub16_add_neon:   6174.3
vp9_inv_dct_dct_32x32_sub20_add_neon:   7151.4
vp9_inv_dct_dct_32x32_sub24_add_neon:   7145.3
vp9_inv_dct_dct_32x32_sub28_add_neon:   8119.3
vp9_inv_dct_dct_32x32_sub32_add_neon:   8118.7

After:
vp9_inv_dct_dct_16x16_sub1_add_neon:     236.7
vp9_inv_dct_dct_16x16_sub2_add_neon:     640.8
vp9_inv_dct_dct_16x16_sub4_add_neon:     639.0
vp9_inv_dct_dct_16x16_sub8_add_neon:     842.0
vp9_inv_dct_dct_16x16_sub12_add_neon:   1388.3
vp9_inv_dct_dct_16x16_sub16_add_neon:   1389.3
vp9_inv_dct_dct_32x32_sub1_add_neon:     554.1
vp9_inv_dct_dct_32x32_sub2_add_neon:    3685.5
vp9_inv_dct_dct_32x32_sub4_add_neon:    3685.1
vp9_inv_dct_dct_32x32_sub8_add_neon:    3684.4
vp9_inv_dct_dct_32x32_sub12_add_neon:   5312.2
vp9_inv_dct_dct_32x32_sub16_add_neon:   5315.4
vp9_inv_dct_dct_32x32_sub20_add_neon:   7154.9
vp9_inv_dct_dct_32x32_sub24_add_neon:   7154.5
vp9_inv_dct_dct_32x32_sub28_add_neon:   8126.6
vp9_inv_dct_dct_32x32_sub32_add_neon:   8127.2

This is cherrypicked from libav commit
a63da451.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This avoids loading and calculating coefficients that we know will
be zero, and avoids filling the temp buffer with zeros in places
where we know the second pass won't read.

This gives a pretty substantial speedup for the smaller subpartitions.

The code size increases from 12388 bytes to 19784 bytes.

The idct16/32_end macros are moved above the individual functions; the
instructions themselves are unchanged, but since new functions are added
at the same place where the code is moved from, the diff looks rather
messy.

Before:                              Cortex A7       A8       A9      A53
vp9_inv_dct_dct_16x16_sub1_add_neon:     273.0    189.5    212.0    235.8
vp9_inv_dct_dct_16x16_sub2_add_neon:    2102.1   1521.7   1736.2   1265.8
vp9_inv_dct_dct_16x16_sub4_add_neon:    2104.5   1533.0   1736.6   1265.5
vp9_inv_dct_dct_16x16_sub8_add_neon:    2484.8   1828.7   2014.4   1506.5
vp9_inv_dct_dct_16x16_sub12_add_neon:   2851.2   2117.8   2294.8   1753.2
vp9_inv_dct_dct_16x16_sub16_add_neon:   3239.4   2408.3   2543.5   1994.9
vp9_inv_dct_dct_32x32_sub1_add_neon:     758.3    456.7    864.5    553.9
vp9_inv_dct_dct_32x32_sub2_add_neon:   10776.7   7949.8   8567.7   6819.7
vp9_inv_dct_dct_32x32_sub4_add_neon:   10865.6   8131.5   8589.6   6816.3
vp9_inv_dct_dct_32x32_sub8_add_neon:   12053.9   9271.3   9387.7   7564.0
vp9_inv_dct_dct_32x32_sub12_add_neon:  13328.3  10463.2  10217.0   8321.3
vp9_inv_dct_dct_32x32_sub16_add_neon:  14176.4  11509.5  11018.7   9062.3
vp9_inv_dct_dct_32x32_sub20_add_neon:  15301.5  12999.9  11855.1   9828.2
vp9_inv_dct_dct_32x32_sub24_add_neon:  16482.7  14931.5  12650.1  10575.0
vp9_inv_dct_dct_32x32_sub28_add_neon:  17589.5  15811.9  13482.8  11333.4
vp9_inv_dct_dct_32x32_sub32_add_neon:  18696.2  17049.2  14355.6  12089.7

After:
vp9_inv_dct_dct_16x16_sub1_add_neon:     273.0    189.5    211.7    235.8
vp9_inv_dct_dct_16x16_sub2_add_neon:    1203.5    998.2   1035.3    763.0
vp9_inv_dct_dct_16x16_sub4_add_neon:    1203.5    998.1   1035.5    760.8
vp9_inv_dct_dct_16x16_sub8_add_neon:    1926.1   1610.6   1722.1   1271.7
vp9_inv_dct_dct_16x16_sub12_add_neon:   2873.2   2129.7   2285.1   1757.3
vp9_inv_dct_dct_16x16_sub16_add_neon:   3221.4   2520.3   2557.6   2002.1
vp9_inv_dct_dct_32x32_sub1_add_neon:     753.0    457.5    866.6    554.6
vp9_inv_dct_dct_32x32_sub2_add_neon:    7554.6   5652.4   6048.4   4920.2
vp9_inv_dct_dct_32x32_sub4_add_neon:    7549.9   5685.0   6046.9   4925.7
vp9_inv_dct_dct_32x32_sub8_add_neon:    8336.9   6704.5   6604.0   5478.0
vp9_inv_dct_dct_32x32_sub12_add_neon:  10914.0   9777.2   9240.4   7416.9
vp9_inv_dct_dct_32x32_sub16_add_neon:  11859.2  11223.3   9966.3   8095.1
vp9_inv_dct_dct_32x32_sub20_add_neon:  15237.1  13029.4  11838.3   9829.4
vp9_inv_dct_dct_32x32_sub24_add_neon:  16293.2  14379.8  12644.9  10572.0
vp9_inv_dct_dct_32x32_sub28_add_neon:  17424.3  15734.7  13473.0  11326.9
vp9_inv_dct_dct_32x32_sub32_add_neon:  18531.3  17457.0  14298.6  12080.0

This is cherrypicked from libav commit
5eb5aec4.
Signed-off-by: Martin Storsjö <martin@martin.st>

This allows reusing the macro for a separate implementation of the
pass2 function.

This is cherrypicked from libav commit
79d332eb.
Signed-off-by: Martin Storsjö <martin@martin.st>

This allows reusing the macro for a separate implementation of the
pass2 function.

This is cherrypicked from libav commit
47b3c2c1.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This reduces the code size of libavcodec/aarch64/vp9itxfm_neon.o from
19496 to 14740 bytes.

This gives a small slowdown of a couple of tens of cycles, but makes
it more feasible to add more optimized versions of these transforms.

Before:
vp9_inv_dct_dct_16x16_sub4_add_neon:    1036.7
vp9_inv_dct_dct_16x16_sub16_add_neon:   1372.2
vp9_inv_dct_dct_32x32_sub4_add_neon:    5180.0
vp9_inv_dct_dct_32x32_sub32_add_neon:   8095.7

After:
vp9_inv_dct_dct_16x16_sub4_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub16_add_neon:   1390.1
vp9_inv_dct_dct_32x32_sub4_add_neon:    5199.9
vp9_inv_dct_dct_32x32_sub32_add_neon:   8125.8

This is cherrypicked from libav commit
11547601.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This reduces the code size of libavcodec/arm/vp9itxfm_neon.o from
15324 to 12388 bytes.

This gives a small slowdown of a couple tens of cycles, up to around
150 cycles for the full case of the largest transform, but makes
it more feasible to add more optimized versions of these transforms.

Before:                              Cortex A7       A8       A9      A53
vp9_inv_dct_dct_16x16_sub4_add_neon:    2063.4   1516.0   1719.5   1245.1
vp9_inv_dct_dct_16x16_sub16_add_neon:   3279.3   2454.5   2525.2   1982.3
vp9_inv_dct_dct_32x32_sub4_add_neon:   10750.0   7955.4   8525.6   6754.2
vp9_inv_dct_dct_32x32_sub32_add_neon:  18574.0  17108.4  14216.7  12010.2

After:
vp9_inv_dct_dct_16x16_sub4_add_neon:    2060.8   1608.5   1735.7   1262.0
vp9_inv_dct_dct_16x16_sub16_add_neon:   3211.2   2443.5   2546.1   1999.5
vp9_inv_dct_dct_32x32_sub4_add_neon:   10682.0   8043.8   8581.3   6810.1
vp9_inv_dct_dct_32x32_sub32_add_neon:  18522.4  17277.4  14286.7  12087.9

This is cherrypicked from libav commit
0331c3f5.
Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids concatenation, which can't be used if the whole macro
is wrapped within another macro.

This is also arguably more readable.

This is cherrypicked from libav commit
58d87e0f.
Signed-off-by: Martin Storsjö <martin@martin.st>

This makes it more readable.

This is cherrypicked from libav commit
3bc5b28d.
Signed-off-by: Martin Storsjö <martin@martin.st>

The 'sqrt' and 'cbrt' scalers were added in commit
80262d8c, but their symbolic option values
only made available to the showwaves filter, not showwavespic, despite
the scalers working properly by their numerical option values.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>

because the ffprobe can use AVCodecContext parameters
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Fixes: timeout in 758/clusterfuzz-testcase-4720832028868608

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

1. limit to single layer, as there is no current support for setting distortion/quality of multiple layers
2. encoder mode should be kept at default setting (0)
3. remove fixed_alloc parameter from context : seldom if ever used, and no way of properly configuring at the moment
4. add irreversible setting, to allow for lossless encoding. Set to OpenJPEG default (enabled)
5. set numresolution max to 33, which is the maximum number of allowed resolutions according the J2K spec
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>

Fixes: 447860.webm
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: memleak
Fixes: 741/clusterfuzz-testcase-586996200452915

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

avcodec/mpeg4videodec: Fix runtime error: signed integer overflow: -135088512 * 16 cannot be represented in type 'int'

Fixes: 736/clusterfuzz-testcase-5580263943831552

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: 734/clusterfuzz-testcase-4821293192970240

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: 733/clusterfuzz-testcase-4682158096515072

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: undefined shift
Fixes: 631/clusterfuzz-testcase-6725491035734016

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Overhauled version, original patch by Miroslav Slugeň <thunder.m@email.cz>.

Reviewed-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Make it clear that there is no timing-dependent behavior. In particular,
there is no state in which both input and output are denied, and where
you have to wait for a while yourself to make progress (apparently some
hardware decoders like to do this).

Avoid wording that makes references to time. It shouldn't be mistaken
for some kind of asynchronous API (like POSIX read() can return EAGAIN
if there is no new input yet). It's a state machine, so try to use
appropriate terms.
Signed-off-by: Diego Biurrun <diego@biurrun.de>

Merges Libav commit 8a60bba0.