* commit '20689570':
  x86inc: Remove our FMA4 support
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'c108ba01':
  x86inc: Use VEX-encoded instructions in AVX functions
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '15748773':
  avresample/x86: Switch operand order for mulps
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '84a125c4':
  rtmp: Allocate the prev_pkt arrays dynamically
Merged-by: Michael Niedermayer <michaelni@gmx.at>

This is so we can sync to x264's version of FMA4 support.

This partialy reverts commit 79687079.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

Automatically use VEX-encoding in AVX/AVX2/XOP/FMA3/FMA4
functions for all instructions that exists in a VEX-encoded
version.

This change makes it easier to extend existing code to use AVX2.

Also add support for AVX emulation of a few instructions that
were missing before.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

With the forthcoming VEX instruction emulation, mulps
must have only the third operand point to memory, as
this is what vmulps expects.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

Normally, all channel ids are between 0 and 10, while they in
uncommon cases can have values up to 64k.

This avoids allocating two arrays for up to 64k entries (at a total
of over 6 MB in size) each when most of them aren't used at all.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: James Almer <jamrial@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: James Almer <jamrial@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* qatar/master:
  cavs: Check for negative cbp

Conflicts:
	libavcodec/cavsdec.c

See: 9f06c1c6Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '1b20d0f5':
  cavs: Return meaningful error values

Conflicts:
	libavcodec/cavsdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '14ddbb47':
  cavs: K&R formatting cosmetics

Conflicts:
	libavcodec/cavs.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

It appears this bug originates from a "work in progress" patch from
ffmpeg-devel that was heavily redesigned by and integrated in libav

And that patch even had a reply and review on the mailing list pointing
out that it had a bug.

This fixes a deadlock with ffserver

See: [FFmpeg-devel] [PATCH] Fix HTTP authentication problem for POST actions.
     [FFmpeg-devel] [PATCH 1/3] Introduce auth_phase flag, which will be true if authorization needs to be sent, but the type of authorization is not known yet Partial fix #3036
     [FFmpeg-devel] [PATCH 2/3] Only add Transfer-Encoding header when not in authorization phase, because server will wait (indefinitely) for data when receiving this header Partial fix #3036
     [FFmpeg-devel] [PATCH 3/3] Only allow posting data and/or forcing a 200 code, enabling posting isml chunks, -after- we did a possible first request to get a 403 from the server telling us which type of authentication to apply Final part fix #3036
See: 71549a85Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* commit '71549a85':
  http: Support auth method detection for POST

Conflicts:
	libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'eb8b05a3':
  http: Add an option for forcing basic authentication

Conflicts:
	libavformat/http.c
	libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'eb90a209':
  pthread: Fix deadlock during thread initialization

Conflicts:
	libavcodec/pthread.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Fixes Ticket2921
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fixes uninitialized use of variables

Fixes part of Ticket2921
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* cus/stable:
  ffplay: add support for changing the channel by the C key
  ffplay: cycle through the streams of the current program, and not every stream
  ffplay: add null packet after attached pics packet
  ffplay: factor out putting null packet into the queue
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Fixes null pointer dereference
Fixes Ticket2843
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Line comes from ecab1c77
and was not merged previously

Thanks-to: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Sample-Id: 00000647-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Signed-off-by: Marton Balint <cus@passwd.hu>

When changing the audio, video or subtitle stream, from now on, ffplay will
cycle through the streams of the current program.
Signed-off-by: Marton Balint <cus@passwd.hu>

Fixes ticket #2904.
Signed-off-by: Marton Balint <cus@passwd.hu>

Signed-off-by: Marton Balint <cus@passwd.hu>

Inspired by a patch by Jakob van Bethlehem. But instead of doing
an empty POST first to trigger the WWW-Authenticate header (which
would succeed if no auth actually was required), add an Expect:
100-continue header, which is meant to be used exactly for
cases like this.

The header is added if doing a post, and the user has specified
authentication but we don't know the auth method yet.

Not all common HTTP servers support the Expect: 100-continue header,
though, so we only try to use it when it really is needed. The user
can request it to be added for other POST requests as well via
an option - which would allow the caller to know immediately that
the POST has failed (e.g. if no auth was provided but the server
required it, or if the target URL simply doesn't exist).

This is only done for write mode posts (e.g. posts without pre-set
post_data) - for posts with pre-set data, we can just redo the post
if it failed due to 401.
Signed-off-by: Martin Storsjö <martin@martin.st>

The default is to autodetect the auth method. This does require one
extra request (and also closing and reopening the http connection).
For some cases such as HTTP POST, the autodetection is not handled
properly (yet).

No option is added for digest, since this method requires getting
nonce parameters from the server first and can't be used straight
away like Basic.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Sometimes, if pthread_create() failed, then pthread_cond_wait() could
accidentally be called in the worker threads after the uninit function
had already called pthread_cond_broadcast(), leading to a deadlock.

Don't call pthread_cond_wait() if c->done is set.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* qatar/master:
  indeo4: Check the inherited quant_mat

Conflicts:
	libavcodec/indeo4.c

See: 884efd4eMerged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '0cb83c56':
  indeo4: Check the block size if reusing the band configuration

Conflicts:
	libavcodec/indeo4.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>