Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Should prevent some leaks if header writing fails
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Can happen in cases where's there's zero autocorrelation (pulses),
and it also implies NaN/inf coeffs

Signed-off-by: James Almer <jamrial@gmail.com>

Reported by Bob, no6b no6b com

Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes null pointer dereference
Fixes: c4faf8280ba366bf00a79d425f2910a8/signal_sigsegv_1f96477_5177_1448ba7e4125faceb966f44ceb69abfa.qcp
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Cleaner solution is welcome!
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This was somehow forgotten in a8bb81a0.

Signed-off-by: Vittorio Gambaletta <ffmpeg-dev@vittgam.net>
Signed-off-by: Marton Balint <cus@passwd.hu>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This is needed as near infinite values on the input side result in only some
output to be non finite.
Also it may still be insufficient if subsequent computations overflow

Fixes null pointer dereference
Fixes: ae66c0f6c12ac1cd5c2c237031240f57/signal_sigsegv_2618c99_9516_6007026f2185a26d7afea895fbed6e38.ogg

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This feature is not know much or used much AFAIK, and it might be helpfull in
exploits.
No specific case is known where it can be used in an exploit though
subsequent commits depend on this commit though
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Leftover from the experimental flag removal.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

Has been marked for removal for over a month and has not been improved
or touched at all since it was implemented.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

Too many crashes observed. Can't be helped until the autocorrelation
function is massively checked for sanity.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

Documentation of eval, param0 and param1 parameters
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

With this, user applications which use custom IO and have set a IO context will not have
their already opened IO context ignored and glob/seq being interpreted

Comments and tests from maintainers of user apps are welcome!
Liked-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.

Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>

Fixes: 55d71971da50365d542ed14b65565fe1/signal_sigsegv_4765a4_8499_f146af090a94f591d6254515c7700ef5.mkv

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

vf_scale: Detecting changes of incoming frame properties and dinamically evaluate width and height expressions

Currently scale filter accepts expressions in its width and height
parameters but evaluates them only once at init and replaces them with
their actual values. Later on, if any parameter of incoming frames
changes - ie those were used in the original size expressions -  then
they new values will not have any affect for width and heigth values.
They remain the same. This patch makes possible that width and height
expressions be evaluated frame-by-frame basis if width/height/sar/format
properties of incoming frame would change. To retain the current
behaviour and not to break any earlier app, a new config parameter has
been introduced. Its name is "eval" and it has two distinct values:
"init" and "frame". The default value is "init".
This feature is very usefull in case of DVBT mpeg-ts streams where SAR
may change time-by-time from 4/3 to 16/9 and vica-versa and the size
remains the same and you want to create a variable sized output with 1/1
SAR.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

vf_overlay video filter accepts expressions in its parameters. In
'frame-by-frame' evaluation mode it recalculates them regularly, but
incoming video frame size changes did not reflect in their values. So if
you used width or height of any source videos in expressions as
parameters, they stayed on their initial values. This patch corrects
this bug.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Reviewed-by: Paul B Mahol <onemda@gmail.com
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Based on the original documentation found in mpeg2dec (1995).
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Now that the seek only happens with the right mouse button, it makes
sense to toggle full screen when double-clicking with the left mouse
button, like other video players do.
Signed-off-by: Vittorio Gambaletta <ffmpeg-dev@vittgam.net>
Signed-off-by: Marton Balint <cus@passwd.hu>

Seeking by clicking on the video window can be annoying, because
the user might click on it accidentally while eg. trying to get
focus on it, and ffplay seeks instead.

This commit changes that behaviour to seek only when the right
mouse button is used to click and drag on the window.
Signed-off-by: Vittorio Gambaletta <ffmpeg-dev@vittgam.net>
Signed-off-by: Marton Balint <cus@passwd.hu>

Should help dynamic filtergraph reconfiguration.
Signed-off-by: Paul B Mahol <onemda@gmail.com>

If the filename isnt set by the user application then the code behaves like before
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Adding mastering display metadata struct to avutil. The mastering display metadata contains information
about the mastering display color volume (SMPTE 2086:2014).

This info comes from HEVC in the SEI_TYPE_MASTERING_DISPLAY_INFO and is soon to be included in MKV:
https://mailarchive.ietf.org/arch/search/?email_list=cellar&gbt=1&index=sZyfPTM-QY69P-0omfOIiTN622o
so it is similar to SEI FPA / stereo_mode in MKV and as such this patch follows how AVStereo3D is implemented.

I'll add support to HEVC in a follow-up (and MKV when spec is approved).
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This patch corrects the colors of the 2 and 4 bpp palettes.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Requested by Andy E, fixes bug 687.

* commit '7570c9e0':
  swfdec: support compressed swf
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>

* commit '34d45b36':
  asfdec: Fix typo in comment
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>

* commit '40d43d25':
  APIchanges: Add missing av_pix_fmt_get_chroma_sub_sample entry
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>

* commit '73c8c034':
  arm: Fix vfp dead code elimination with have_vfp_vm
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>