* commit '4f6cd883':
  rtpenc: Don't set max_frames_per_packet based on the packet frame size or frame rate
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'bde2bba4':
  rtpenc: Restructure if statements in packetizers to simplify adding more conditions

Conflicts:
	libavformat/rtpenc_xiph.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'd4c7fc02':
  rtpenc: Skip redundant initialization
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'f8c01257':
  rtpenc: Always do the default initialization regardless of codecs
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '11edeaea':
  rtpenc_xiph: Don't exclude headers from max_payload_size
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '7c1e2e64':
  rtpenc_xiph: Use AV_WB16 instead of manual bitshifts

Conflicts:
	libavformat/rtpenc_xiph.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'd16c8d28':
  rtpenc_aac: Use AV_WB16 instead of manual bitshifts
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '9c9b0218':
  rtpenc_aac: Merge a definition with a declaration
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '1fc64e2e':
  rtpenc: Write conditional statements on separate lines
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '0662440b':
  rtpenc_aac: Set a default value for max_frames_per_packet at init
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '12b34599':
  rtpenc_amr: Use s->num_frames instead of s->buf_ptr - s->buf
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '98563953':
  rtpenc_aac: Fix sending fragmented frames
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '990e4a66':
  Add a QSV decoding example.

Conflicts:
	configure
	doc/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'ea1d0b7e':
  avcodec/utils: use correct printf specifier in ff_set_sar

See: 732c3ebfMerged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '802987f8':
  x11grab: Unbreak building

Conflicts:
	libavdevice/x11grab.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '71f1ad37':
  lavc: do not compile fmtconvert unconditionally

Conflicts:
	configure
	libavcodec/ppc/Makefile
	libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'd74a8cb7':
  fmtconvert: drop unused functions

Conflicts:
	libavcodec/arm/fmtconvert_vfp_armv6.S
	libavcodec/x86/fmtconvert.asm
	libavcodec/x86/fmtconvert_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'ee964145':
  lavc: remove unused traces of fmtconvert usage

Conflicts:
	libavcodec/aac.h
	libavcodec/aacdec.c
	libavcodec/atrac3.c
	libavcodec/vorbisdec.c
	libavcodec/wma.c
	libavcodec/wma.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'b9d2d684':
  tls: Pass AVOptions dictionaries through to the chained protocol

Conflicts:
	libavformat/tls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'e14f98c6':
  tcp: Clarify the units for the timeout avoptions

Conflicts:
	libavformat/tcp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'c86d8aed':
  avio: Rename avclass symbols relating to avio
Merged-by: Michael Niedermayer <michaelni@gmx.at>

flags is later written with avio_w8 and if it doesn't fit in one byte it
triggers an av_assert2.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

These could trigger assert failures previously
Found-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Instead check the timestamps while muxing, to avoid buffering a
too long timestamp range into one single packet.

This makes the AMR and AAC packetization slightly less efficient,
since we set a possibly unnecessarily high max_frames_per_packet.
(These packetizers end up doing a memmove of the TOC bytes if
sending a packet before max_frames_per_packet is achieved, and
we end up setting max_frames_per_packet to a value that should
be high enough for most uses.)

All packetizers that use max_frames_per_packet now set it either
to a default value, or to a value calculated based on other
parameters, so none of them rely on the previous default setting.

For iLBC, copy one frame at a time, to allow checking the timestamp
range for each of them - basically doing potentially multiple
loops to simplify the code instead of trying to calculate the
number of frames to buffer while honoring s1->max_delay.

This is in preparation for reducing the coupling between libavformat
and libavcodec, by not having the muxers use the encoder field
frame_size (which may not be available during e.g. stream copy).
Signed-off-by: Martin Storsjö <martin@martin.st>

Factorize out the s->num_frames check at the start of the if statements,
simplifying adding more alternative causes for sending the buffered
frames.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids having to jump to the defaultcase in the switch. Manually
override the stream time base back to 90 kHz for the few audio codecs
that don't use the sample rate as time base (mp2, mp3).
Signed-off-by: Martin Storsjö <martin@martin.st>

This makes things more consistent by using the variable in the same
way as in all other packetizers.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This makes the code slightly more readable and understandable.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

Intentionally keeping some conditional statements on single lines
in rtpenc_h263.c.
Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids having to conditionally set the default within the
packetizer function.
Signed-off-by: Martin Storsjö <martin@martin.st>

This doesn't fix any bug, but makes the code simpler for later
patches, and more straightforward to read as is.
Signed-off-by: Martin Storsjö <martin@martin.st>

After sending a fragmented frame, len (s->buf_ptr - s->buf) isn't
zero, while s->num_frames is zero as intended. Using s->num_frames
makes it work as intended, and is less convoluted than keeping track
of (resetting) s->buf_ptr.

This avoids sending stray data after sending a fragmented aac packet.

CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

The correct macro is DEC not D. Broken in
b31328d0Signed-off-by: Anton Khirnov <anton@khirnov.net>

Only ac3dec and dcadec use it.