fix ticket: 7160
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

simplify the code to check common init section

Add NULL pointer check for init_section

This was broken by bed670a1, which added
an assert that always failed.

Fixes: #7165
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

avformat/bintext: Reduce detection for random .bin files as it more likely is not a multimedia related file
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: James Almer <jamrial@gmail.com>

The libvpx doxy says that a value of 0 for the g_threads field is
equivalent to a value of 1, whereas for avctx->thread_count it means
the maximum amount of threads possible for the host system.

Use av_cpu_count() to get the correct thread count when auto threads
is requested.
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>

This uses any devices it can find on the host system - on a system with no
hardware device support or in builds with no support included it will do
nothing and pass.

Signed-off-by: Aman Gupta <aman@tmm1.net>

Signed-off-by: Aman Gupta <aman@tmm1.net>

Both stream_id and stream_identifier are used in this file,
and have different meanings. The latter comes from the
stream_identifier_descriptor.
Signed-off-by: Aman Gupta <aman@tmm1.net>

Fixes regression with playback of GF9720Repeal20the20Eighth20with20Helen20Linehan.m4a
See: crbug 822666
Found-by: "Mattias Wadman <mattias.wadman@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Without this some operations might overflow (undefined behavior)
even though the index adding loop would never execute

No testcase known
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

If v->fieldtx_is_raw is not reset to zero, it may spill over from a previous
interlaced frame I/BI picture.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This eliminates several low score detections of non mp3 files
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This corrects several misdetections of large files
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This massively reduces the detection of random data as low score mp3
It may improve security by making it harder to read non multimedia data
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Only for the last slice of the first field is the last line of the slice
equal to the height of the field.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

DIRECTBIT was decoded before the intra/inter MB branching when decoding
interlace frame B pictures. Resulting in mistakenly also decoding it for intra
MBs where this syntax element is not present.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This new optional flag makes it easier to deal with mpegts
samples where the PMT is updated and elementary streams move
to different PIDs in the middle of playback.

Previously, new AVStreams were created per PID, and it was up
to the user to figure out which streams had migrated to a new PID
(by iterating over the list of AVProgram and making guesses), and
switch seamlessly to the new AVStream during playback.

Transcoding or remuxing these streams with ffmpeg on the CLI was
also quite painful, and the user would need to extract each set
of PIDs into a separate file and then stitch them back together.

With this new option, the mpegts demuxer will automatically detect
PMT changes and feed data from the new PID to the original AVStream
that was created for the orignal PID. For mpegts samples with
stream_identifier_descriptor available, the unique ID is used to
merge PIDs together. If the stream id is not available, the demuxer
attempts to map PIDs based on their position within the PMT.

With this change, I am able to playback and transcode/remux these
two samples which previously caused issues:

    https://tmm1.s3.amazonaws.com/pmt-version-change.ts
    https://kuroko.fushizen.eu/videos/pid_switch_sample.ts

I also have another longer sample in which the PMT changes
repeatedly and ES streams move to different pids three times
during playback:

    https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts

Demuxing this sample with the new option shows several new log
messages as the PMT changes are handled:

    [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7)
    [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7
    [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8
    [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9
    [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98)
    [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b)
    [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b
    [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c
    [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d
    [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9)
    [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9
    [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa
    [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab
    [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7)
Signed-off-by: Aman Gupta <aman@tmm1.net>

With these fields, the user has enough information to
detect PMT changes and switch to new streams when the PMT
is updated with new ES pids.

To do so, the user would monitor the AVProgram they're interested
in for changes to pmt_version. If the version changes, they would
iterate over the program's streams to find new streams added with
the updated version number.

If new versions of streams are found, then the user would first try
to replace existing streams where stream_identifier matched.
If stream_identifier is not available, then the user would compare
pmt_stream_idx instead to replace the stream that was previously
at the same position within the PMT.
Signed-off-by: Aman Gupta <aman@tmm1.net>

These fields will allow the mpegts demuxer to expose details about
the PMT/program which created the AVProgram and its AVStreams.

In mpegts, a PMT which advertises streams has a version number
which can be incremented at any time. When the version changes,
the pids which correspond to each of it's streams can also change.

Since ffmpeg creates a new AVStream per pid by default, an API user
needs the ability to (a) detect when the PMT changed, and (b) tell
which AVStream were added to replace earlier streams.

This has been a long-standing issue with ffmpeg's handling of mpegts
streams with PMT changes, and I found two related patches in the wild
that attempt to solve the same problem:

The first is in MythTV's ffmpeg fork, where they added a
void (*streams_changed)(void*); to AVFormatContext and call it from
their fork of the mpegts demuxer whenever the PMT changes.

The second was proposed by XBMC in
https://ffmpeg.org/pipermail/ffmpeg-devel/2012-December/135036.html,
where they created a new AVMEDIA_TYPE_DATA stream with id=0 and
attempted to send packets to it whenever the PMT changed.
Signed-off-by: Aman Gupta <aman@tmm1.net>

Signed-off-by: James Almer <jamrial@gmail.com>

In a normal hwaccel, the AVHWFramesContext sets AVFrame.hw_frames_ctx
when it initializes a new AVFrame in av_hwframe_get_buffer().

But the VT hwaccel doesn't know what hw_frames_ctx to assign when
the AVFrame is first created, because it depends on the format of
the pixbuf that the decoder eventually decides to return. Thus
newly created AVFrames always have a NULL hw_frames_ctx, and the
hwaccel would only assign the ctx once a frame was done decoding.
This worked fine with the H264 decoder, but with the HEVC decoder
the frame's data may be moved to another empty AVFrame. Since the
empty AVFrame never had hw_frames_ctx set, a frame with a NULL
ctx could be returned to the API user.

This patch works around the issue by moving the derived
hw_frames_ctx from the AVFrame to a new VTHWFrame which now holds
both the CVPixelBufferRef and the AVBuffer. The hw_frames_ctx
is only copied to the AVFrame right before it is about to be
returned to the user in videotoolbox_postproc_frame() (since
in the case of VT, the hw_frames_ctx is only there for the API
user anyway).

Fixes playback on macOS and iOS of some hevc videos like
https://s3.amazonaws.com/tmm1/videotoolbox/germany-hevc-zdf.tsSigned-off-by: Aman Gupta <aman@tmm1.net>

Some filtered mpegts streams may erroneously include PMTs for
programs that are not advertised in the PAT. This confuses ffmpeg
and most players because multiple audio/video streams are created
and it is unclear which ones actually contain data.

See for example https://tmm1.s3.amazonaws.com/unknown-pmts.ts

In this sample, the PAT advertises exactly one program. But the
pid it points to for the program's PMT contains PMTs for other
programs as well. This is because the broadcaster decided to
re-use the same pid for multiple program PMTs.

The hardware that filtered the original multi-program stream
into a single-program stream did so by rewriting the PAT to
contain only the program that was requested. But since it just
passed through the PMT pid referenced in the PAT, multiple PMTs
are still present for the other programs.

Before:

    Input #0, mpegts, from 'unknown-pmts.ts':
      Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s
      Program 4
        Stream #0:2[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc
        Stream #0:3[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s
        Stream #0:4[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s
      No Program
        Stream #0:0[0x31]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv), 90k tbr, 90k tbn, 90k tbc
        Stream #0:1[0x34](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels, fltp
        Stream #0:5[0x51]: Video: mpeg2video ([2][0][0][0] / 0x0002), none, 90k tbr, 90k tbn
        Stream #0:6[0x54](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels

With skip_unknown_pmt=1:

    Input #0, mpegts, from 'unknown-pmts.ts':
      Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s
      Program 4
        Stream #0:0[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc
        Stream #0:1[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s
        Stream #0:2[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s
Signed-off-by: Aman Gupta <aman@tmm1.net>

Generates color bar test patterns based on EBU PAL recommendations.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

The FATE tests for MSVC versions older than 2013 are untested in FATE
and apparently are no longer supported.

This commit makes the configure process error out in case an older version
is used, and suggests to use a supported version of MSVC to compile.

This also changes the documentation to reflect this.

As discussed on IRC:

2018-05-12 19:45:16     jamrial then again, most of those were for old msvc, and i think we're not supporting versions older than 2013 (first one c99 compliant) anymore
2018-05-12 19:45:43     +JEEB   yea, I think 2013 update 2 is needed

22:53 <@atomnuker> nevcairiel: which commit broke/unsupported support for msvc 2013?
23:23 <@atomnuker> okay, it was JEEB
23:25 <+JEEB> which was for 2012 and older
23:25 <+JEEB> and IIRC we no longer test those in FATE so that was my assumption
23:26 <+JEEB> 2013 is when MS got trolled enough to actually update their C part
23:26 <+JEEB> aand actually advertised FFmpeg support
23:26 <+JEEB> (although it was semi-failing until VS2013 update 1 or 2)
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

Parses the video_stream_descriptor (H.222 2.6.2) to look
for the still_picture_flag. This is exposed to the user
via a new AV_DISPOSITION_STILL_IMAGE.

See for example https://tmm1.s3.amazonaws.com/music-choice.ts,
whose video stream only updates every ~6 seconds.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

For seekable mpegts streams, duration is calculated from
pts by seeking to the end of the file for a pts and subtracting
the initial pts to compute a duration.

This can be expensive in terms of added latency during
probe, especially when streaming over a network. This new
option lets you skip the duration calculation, which is useful
when you don't care about the value and want to save some overhead.

This patch is particularly useful when dealing with live mpegts
streams. Normally such streams are not seekable, so durations
are not calculated. However in my case I am dealing with a seekable
live mpegts stream (networked access to a .ts file which is still
being appended to).
Signed-off-by: Aman Gupta <aman@tmm1.net>