30% faster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Since those are pseudo-palette formats, swscale does not write
into data[1], swscale must initialize the palette properly itself.
This lead to frames that actually decoded as all-gray before.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

This fixes that the GIF encoder crashes with it because
it has no palette.
And the arguments for the pseudopalette apply to gray8 as
much as to RGB8 etc.
In addition the changes required in lavfi should be needed anyway
when adding support for RGB8 etc.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

We can't use whether the input format is paletted to decide that
the output format has a palette in data[1], too, that makes no sense.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Resolution changes are usually only used to scale with
network bandwidth, the (full) resolution specified in the
RM header really is authoritative.
While I am not sure this is the best solution, it is a
conservative approach that still should fix the most
common cases.
In particular, it fixes aspect with the sample from trac
issue #785 (in MPlayer, ffplay seems to just ignore
sample aspect changes in mid-playback).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

When decoding LATM, this function will not process extradata
but a different buffer.
It seems this was forgotten to update when LATM support
was added.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

* qatar/master:
  rtsp: Don't use av_malloc(0) if there are no streams
  rtsp: Don't use uninitialized data if there are no streams
  vaapi: mpeg2: fix slice_vertical_position calculation.
  hwaccel: mpeg2: decode first field, if requested.
  cosmetics: Fix indentation
  rtsp: Don't expose the MS-RTSP RTX data stream to the caller
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

This makes it easy to allow people to run tests that are disabled
(e.g. because they are broken) without having to hack Makefiles
by adding the test name to FATE_TESTS-no.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Use the correct init function to avoid crashes due to writing
to a rodata location.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This uses the same code as in decode_video also in decode_audio.
Should fix valgrind FATE failures for nellymoser encode test.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

VASliceParameterBufferMPEG2.slice_vertical_position shall express
the slice vertical position from the original bitstream. The HW
decoder will correctly decode to the right line computed from the
appropriate top_field_first and is_first_field flags.

This patch aligns with DXVA's definition, which is what most HW and
drivers expect. In particular, Intel PowerVR (Cedarview et al.) and
NVIDIA (through VA-to-VDPAU layer). Since it looks more complex to fix
binary drivers, I aligned the Intel Gen driver (Sandy Bridge et al.)
to this behaviour, while maintaining compatibility with codec layers
not providing this patch yet.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Martin Storsjö <martin@martin.st>

If user opted to present fields as they come, then the first field
picture needs to be submitted to the HW for decoding. In particular,
this fixes MPEG-2 decoding of interlaced streams.

Tested on Intel Cedar Trail, Sandy Bridge and Ivy Bridge platforms.
Someone reported on the ffmpeg-devel@ list this also works on DXVA
(Windows) and other Linux platforms (NVIDIA, through the VA wrapper).

This also means a similar patch to non-hwaccel VDPAU may be necessary.

Note: I believe the SLICE_FLAG_ALLOW_FIELD is useless since the first
field shall always be submitted to the HW anyway. Nobody uses HW accels
(dxva, vaapi, vdpau, etc.) without that flag though.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Since we cannot specify decode parameters (and also because
it is better in principle) the 1-channel reference file
needs to be enabled, too.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Remove it from two places where it is useless, do not apply
it to the encode command and make it apply to the output
instead of the input of the decode command.
Should fix the dpx test.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Simplify, increase robustness.

* qatar/master:
  rtpdec_asf: Set the no_resync_search option for the chained asf demuxer
  asfdec: Add an option for not searching for the packet markers
  cosmetics: Clean up the tiffenc pix_fmts declaration to match the style of others
  cosmetics: Align codec declarations
  cosmetics: Convert mimic.c to utf-8
  avconv: remove an unused function parameter.
  avconv: remove now pointless variables.
  avconv: drop support for building without libavfilter.
  nellymoserenc: fix crash due to memsetting the wrong area.
  libavformat: Only require first packet to be known for audio/video streams
  avplay: Don't try to scale timestamps if the tb isn't set

Conflicts:
	Changelog
	configure
	ffmpeg.c
	libavcodec/aacenc.c
	libavcodec/bmpenc.c
	libavcodec/dnxhddec.c
	libavcodec/dnxhdenc.c
	libavcodec/ffv1.c
	libavcodec/flacenc.c
	libavcodec/fraps.c
	libavcodec/huffyuv.c
	libavcodec/libopenjpegdec.c
	libavcodec/mpeg12enc.c
	libavcodec/mpeg4videodec.c
	libavcodec/pamenc.c
	libavcodec/pgssubdec.c
	libavcodec/pngenc.c
	libavcodec/qtrleenc.c
	libavcodec/rawdec.c
	libavcodec/sgienc.c
	libavcodec/tiffenc.c
	libavcodec/v210dec.c
	libavcodec/wmv2dec.c
	libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

The format is slightly proprietary.
DVDs use a format of
code byte (0x00, 0x01, 0xfe or 0xff), two data bytes
MOV uses instead
cdat/cdt2 atom, two data bytes
Auto-detecting and supporting both in one decoder is trivial,
so a single codec ID is used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Values that fail this check will cause failure of decode_rice()
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>