* commit '01eac895':
  rtmpproto: Only prepend @setDataFrame for onMetaData and |RtmpSampleAccess

Conflicts:
	libavformat/rtmpproto.c

See: 60fd790fMerged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '44127b15':
  rtmppkt: Make pkt->data reallocable
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '3c3b8003':
  rtmpproto: Simplify code for copying data into the output packet

Conflicts:
	libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '857e6667':
  rtmpproto: Clarify a comment

Conflicts:
	libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Currently, when streaming to an RTMP server, any time a packet of type
RTMP_PT_NOTIFY is encountered, the packet is prepended with @setDataFrame
before it gets sent to the server. This is incorrect; only packets for
onMetaData and |RtmpSampleAccess should invoke @setDataFrame on the RTMP
server. Specifically, the current bug manifests itself when trying to
stream onTextData or onCuePoint invocations.

This fix addresses that problem and ensures that the @setDataFrame is
only prepended for onMetaData and |RtmpSampleAccess.

Since data is fed to the rtmp_write function in smaller pieces (depending
on the calling IO buffer size), we can't generally assume that the
whole packet (or even the whole command string) is available at once,
therefore we can only check the command string once the full packet
has been transferred to us for sending.

Based on a patch by Jeffrey Wescott.
Signed-off-by: Martin Storsjö <martin@martin.st>

We try to avoid mixing av_malloc with av_realloc, since av_malloc
may be implemented with functions that can't (formally) be mixed
with the functions used in av_realloc.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

Fixes out of array access
Fixes: signal_sigsegv_35bd0f0_1182_cov_791726764_STRUCT_B_Samsung_4.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* commit '19730794':
  opusdec: make sure all substreams have the same number of coded samples
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '96fda42a':
  vf_interlace: get rid of useless loads

See: ca59b5b6Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'fbd6c97f':
  lavu: fix memory leaks by using a mutex instead of atomics

Conflicts:
	libavutil/buffer.c

The atomics code is left in place as a fallback for synchronization in the
absence of p/w32 threads. Our ABI did not requires applications to
only use threads (and matching ones) to what libavutil was build with
Our code also was not affected by the leak this change fixes, though
no question the atomics based implementation is not pretty at all.
First and foremost the code must work, being pretty comes after that.

If this causes problems, for example when libavutil is used by multiple
applications each using a different kind of threading system then the
default possibly has to be changed to the uglier atomics.

See: cea3a63bMerged-by: Michael Niedermayer <michaelni@gmx.at>

So far ffmpeg used recommended configuration only for codec priv options.
ffmpeg will use now codec defaults and then apply recommended configuration
for all options. Recommended configuration possibly contains minimal
set of options to filful user configuration.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>

ffmenc will store recommended encoder configuration if present.
This will allow the user to base on local defaults and
apply only explicitly set options.

If recommended encoder configuration is not present, then
non-default context's options are stored.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>

Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>

* commit '2443e522':
  lavu: add wrappers for the pthreads mutex API
Merged-by: Michael Niedermayer <michaelni@gmx.at>

By appending `?dscp=26` to the URL, IP packets will be classified as
AF31 (assured forwarding for multimedia flows with low probability of
loss). On congested network, this allows a user to assign priorities to
flows.
Signed-off-by: Vincent Bernat <vincent@bernat.im>

By appending `?dscp=26` to the URL, IP packets will be classified as
AF31 (assured forwarding for multimedia flows with low probability of
loss). On congested network, this allows a user to assign priorities to
flows.
Signed-off-by: Vincent Bernat <vincent@bernat.im>

Fixes: signal_sigabrt_7ffff6ac7bb9_2683_cov_4120310995_m_ijpg.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fixes out of array read
Fixes: signal_sigsegv_35bcf26_471_cov_2806540268_CAINIT_A_SHARP_4.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fixes invalid writes with invalid multichannel streams.

CC:libav-stable@libav.org

Signed-off-by: Anton Khirnov <anton@khirnov.net>

The buffer pool has to atomically add and remove entries from the linked
list of available buffers. This was done by removing the entire list
with a CAS operation, working on it, and then setting it back again
(using a retry-loop in case another thread was doing the same thing).

This could effectively cause memory leaks: while a thread was working on
the buffer list, other threads would allocate new buffers, increasing
the pool's total size. There was no real leak, but since these extra
buffers were not needed, but not free'd either (except when the buffer
pool was destroyed), this had the same effects as a real leak. For some
reason, growth was exponential, and could easily kill the process due
to OOM in real-world uses.

Fix this by using a mutex to protect the list operations. The fancy
way atomics remove the whole list to work on it is not needed anymore,
which also avoids the situation which was causing the leak.
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Also add no-op fallbacks when threading is disabled.

This helps keeping the code clean if Libav is compiled for targets
without threading. Since we assume that no threads of any kind are used
in such configurations, doing nothing is ok by definition.

Based on a patch by wm4 <nfxjfg@googlemail.com>.

Ensures that the header include order is such that winsock2.h is always
included before windows.h or that windows.h does not include winsock.h.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

libavutil/ppc/util_altivec.h : fix load_with_perm_vec() add marcos vcswapi2s() vcswapc() VEC_SPLAT16() VEC_SLD16() for POWER LE
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* commit '675ac56b':
  Revert "lavf: Don't try to update files atomically with renames on windows"

Conflicts:
	libavformat/dashenc.c
	libavformat/hdsenc.c
	libavformat/internal.h
	libavformat/smoothstreamingenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '79fd186a':
  lavf: Use MoveFileEx instead of rename/_wrename on windows

Conflicts:
	configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '9326d64e':
  Share the utf8 to wchar conversion routine between lavf and lavu

Conflicts:
	libavformat/os_support.h
	libavutil/file_open.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

This reverts commit b9d08c77.

After taking MoveFileEx into use, we can replace files with renames
on windows as well.
Signed-off-by: Martin Storsjö <martin@martin.st>

This allows getting the normal unix semantics, where a rename
allows replacing an existing file.

Based on a suggestion by Reimar Döffinger.
Signed-off-by: Martin Storsjö <martin@martin.st>

This doesn't add any dependency on library internals, since this
only is a static inline function that gets built into each of the
calling functions - this is only to reduce the code duplication.
Signed-off-by: Martin Storsjö <martin@martin.st>