- 11 Apr, 2019 1 commit
-
-
Marton Balint authored
Signed-off-by:
Marton Balint <cus@passwd.hu>
-
- 31 Mar, 2019 1 commit
-
-
Jun Li authored
Fix ticket #7297 The current setting for send-expect-100 option is either enabled if applicable or forced enabled, no option to force disable the header. This change is to expand the option setting to provide more flexibility, which is useful for rstp case. Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 03 Mar, 2019 1 commit
-
-
Gyan Doshi authored
The entry for file protocol option 'follow' was inserted under ftp options during merge of a Libav commit - 90eb2499. Corrected.
-
- 23 Oct, 2018 1 commit
-
-
Matsuzawa Tomohiro authored
Several SRT options are missing. Since pkg_config requires libsrt v1.3.0 and above, it should be able to support options added in libsrt v1.3.0 and below. This commit adds 8 SRT options. sndbuf, rcvbuf, lossmaxttl, minversion, streamid, smoother, messageapi and transtype The keys of option are equivalent to stransmit. https://github.com/Haivision/srt/blob/v1.3.0/apps/socketoptions.hpp#L196-L223Signed-off-by:
Marton Balint <cus@passwd.hu>
-
- 03 Oct, 2018 2 commits
-
-
Marton Balint authored
Signed-off-by:
Marton Balint <cus@passwd.hu>
-
Marton Balint authored
This allows getting data only from a specific source IP. This is useful not only for unicast but for multicast as well because multicast source subscriptions do not act as source filters for the incoming packets. Signed-off-by:
Marton Balint <cus@passwd.hu>
-
- 01 Sep, 2018 1 commit
-
-
Marton Balint authored
Also make sure we set the URL context max packet size accordingly. Based on a patch by Tudor Suciu <tudor.suciu@gmail.com> Signed-off-by:
Marton Balint <cus@passwd.hu>
-
- 26 Jul, 2018 1 commit
-
-
Jun Zhao authored
Signed-off-by:
Jun Zhao <mypopydev@gmail.com>
-
- 04 Jun, 2018 1 commit
-
-
Sven Dueking authored
Signed-off-by:
Sven Dueking <sven.dueking@nablet.com> Signed-off-by:
Luca Barbato <lu_zero@gentoo.org>
-
- 03 Jun, 2018 1 commit
-
-
Sven Dueking authored
Signed-off-by:
Sven Dueking <sven.dueking@nablet.com> Signed-off-by:
Luca Barbato <lu_zero@gentoo.org>
-
- 28 Mar, 2018 1 commit
-
-
Sven Dueking authored
The protocol requires libsrt (https://github.com/Haivision/srt) to be installed Signed-off-by:
Sven Dueking <sven.dueking@nablet.com> Signed-off-by:
Luca Barbato <lu_zero@gentoo.org>
-
- 01 Feb, 2018 1 commit
-
-
Steven Liu authored
add Referer message if referer have been set. Signed-off-by:
Steven Liu <lq@chinaffmpeg.org>
-
- 06 Jan, 2018 1 commit
-
-
Rostislav Pehlivanov authored
Signed-off-by:
Rostislav Pehlivanov <atomnuker@gmail.com>
-
- 26 Dec, 2017 1 commit
-
-
Aman Gupta authored
Can be used by the api user to figure out what http features the server supports based on the response received. Signed-off-by:
Aman Gupta <aman@tmm1.net>
-
- 17 Dec, 2017 1 commit
-
-
sfan5 authored
Signed-off-by:
sfan5 <sfan5@live.de>
-
- 19 Nov, 2017 1 commit
-
-
Gyan Doshi authored
Users can set end offset as 0 to extract till end of file. Tested locally and documented.
-
- 17 Nov, 2017 1 commit
-
-
Aman Gupta authored
This can reduce latency and increase throughput, particularly on high latency networks. Signed-off-by:
Aman Gupta <aman@tmm1.net> Reviewed-by:
Jeyapal, Karthick <kjeyapal@akamai.com>
-
- 13 Feb, 2017 1 commit
-
-
Lou Logan authored
Fixes ticket #6148. Signed-off-by:
Lou Logan <lou@lrcd.com>
-
- 13 Nov, 2016 1 commit
-
-
Vlad Tarca authored
Pro-MPEG Code of Practice #3 release 2 forward error correction for rtp_mpegts streams Signed-off-by:
Vlad Tarca <vtarca@mobibase.com> Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 11 Oct, 2016 1 commit
-
-
Moritz Barsnick authored
Signed-off-by:
Moritz Barsnick <barsnick@gmx.net> Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 17 Sep, 2016 1 commit
-
-
Steven Liu authored
-
- 14 Aug, 2016 1 commit
-
-
Moritz Barsnick authored
Instead of silently ignoring the content_type option in listen mode, apply its value to the provided "Content-Type:" header. Signed-off-by:
Moritz Barsnick <barsnick@gmx.net> Reviewed-by:
Nicolas George <george@nsup.org> Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 21 Jul, 2016 1 commit
-
-
Michael Niedermayer authored
Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 19 Jul, 2016 1 commit
-
-
Michael Niedermayer authored
Option passing support will be submitted seperately to the ML Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 17 Jul, 2016 1 commit
-
-
James Almer authored
Signed-off-by:
James Almer <jamrial@gmail.com>
-
- 19 Jun, 2016 1 commit
-
-
Marton Balint authored
We haven't had a stable release since the packet_gap addition, so probably it is worth reworking the option to something that makes more sense to the end user. Also add burst_bits option to specify maximum length of bit bursts. Signed-off-by:
Marton Balint <cus@passwd.hu>
-
- 24 May, 2016 1 commit
-
-
Pavel Nikiforov authored
This commit enables sending UDP packets in a background thread with specified delay. When sending packets without a delay some devices with small RX buffer ( MAG200 STB, for example) will drop tail packets in bursts causing decoding errors. To use it specify "fifo_size" with "packet_gap" . The output url will looks like udp://xxx:yyy?fifo_size=<output fifo size>&packet_gap=<delay in usecs> Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 24 Mar, 2016 2 commits
-
-
Martin Storsjö authored
Using this requires setting the rw_timeout option to make it terminate, alternatively using the interrupt callback (if used via the API). Signed-off-by:
Martin Storsjö <martin@martin.st>
-
Andrey Utkin authored
If set non-zero, this limits duration of the retry_transfer_wrapper() loop, thus affecting ffurl_read*(), ffurl_write(). As soon as one single byte is successfully received/transmitted, the timer restarts. This has further changes by Michael Niedermayer and Martin Storsjö. Signed-off-by:
Martin Storsjö <martin@martin.st>
-
- 14 Feb, 2016 1 commit
-
-
Michael Niedermayer authored
Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 22 Jan, 2016 1 commit
-
-
Perette Barella authored
adds two new options that may be set via the dictionary: - send_buffer_size - recv_buffer_size When present, setsockopt() is used with SO_SNDBUF and SO_RCVBUF to set socket buffer sizes. I chose to make send and receive independent because buffering requirements are often asymmetric. Errors in setting the buffer size mean the socket will use its default, so they are ignored. There is no sanity checking on values, as the kernel/socket layers already impose reasonable limits if asked for something crazy. Rationale for enlarging receive buffers is to reduce susceptibility to intermittent network delays/congestion. I added setting the send buffer for symmetry. Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 28 Dec, 2015 1 commit
-
-
Joel Holdsworth authored
Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 09 Sep, 2015 1 commit
-
-
Michael Niedermayer authored
Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 08 Sep, 2015 1 commit
-
-
Michael Niedermayer authored
Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 07 Sep, 2015 1 commit
-
-
Michael Niedermayer authored
They allow reconnecting endless live streams which fail with eof Reviewed-by:
Zhang Rui <bbcallen@gmail.com> Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 31 Jul, 2015 1 commit
-
-
Stephan Holljes authored
Signed-off-by:
Stephan Holljes <klaxa1337@googlemail.com>
-
- 17 Jul, 2015 1 commit
-
-
Zhang Rui authored
Signed-off-by:
Michael Niedermayer <michael@niedermayer.cc>
-
- 06 Jun, 2015 1 commit
-
-
Stephan Holljes authored
Signed-off-by:
Stephan Holljes <klaxa1337@googlemail.com>
-
- 26 May, 2015 1 commit
-
-
Sebastian Ramacher authored
Signed-off-by:
Sebastian Ramacher <sramacher@debian.org> Signed-off-by:
Luca Barbato <lu_zero@gentoo.org>
-
- 11 Apr, 2015 1 commit
-
-
Stephan Holljes authored
With this patch http can be used to listen for POST data to be used as an input stream. Signed-off-by:
Stephan Holljes <klaxa1337@googlemail.com> Signed-off-by:
Michael Niedermayer <michaelni@gmx.at>
-