* commit '27b0e6eb':
  h264: drop needs_realloc
Merged-by: Michael Niedermayer <michaelni@gmx.at>

It is not needed anymore since switching to refcounted frames.

* commit '0ac8ff61':
  avresample: Reallocate the internal buffer to the correct size
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* commit '82de8d71':
  mpegts: Update the PSI/SI table only if the version change

Conflicts:
	libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '0c69164f':
  h263: Convert function to macro

Conflicts:
	libavcodec/h263.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '59dfc2b0':
  h263: Drop commented-out code and a related otherwise unused function
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'c3418201':
  jpeglsenc: Mark codec as init-thread-safe and init-cleanup
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '3919a457':
  jpeglsenc: Check memory allocations

Conflicts:
	libavcodec/jpeglsenc.c

See: 48214956Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'f5ba67ee':
  flacenc: Move a scratch buffer to struct used by the function

Conflicts:
	libavcodec/flacenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Fixes the corner case in which the internal buffer size
is larger than input buffer provided and resizing it
before moving the left over samples would make it write
to now unallocated memory.

Bug-Id: 825
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

The existing check has two problems:
 1) i + count can overflow, so that the check '< 256' returns true.
 2) In the (i == 'N') case occurs a j-- so that the loop runs once more.

This can trigger the assertion 'nut->header_len[0] == 0' or cause
segmentation faults or infinite hangs.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

This fixes a segmentation fault when accessing the metadata.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

If a PAT is finished while a PMT section filter is opened but
not yet finished, the PMT section filter is closed and all
the received data is discarded.

This is usually not an issue but some multiplexers (With very
quick PAT/PMT repetition settings) consistently emit a PMT
section start, then a PAT, and then the rest of the PMT,
causing the aforementioned behavior to result in no PMT being
finished.

In the most pathologic situation the stream information are lost
and the probe fallback miscategorizes subtitles as mp3 audio.

Avoid the issue through eliminating redundant PSI/SI table
updates by checking their version field, which is required by
the standard to be incremented on every change no matter how
minor.

CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

A negative frame rate triggers an av_assert2 in av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Check extended sync word for 16-bit LE and BE core streams to reduce
probability of alias sync detection. Previously sync word extension was
checked only for 14-bit streams.

This follows up the similar change in avcodec/dca_parser.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fixes a memory leak on init failure.

Convert exisiting free functions to av_freep() to avoid accidental
double frees, and always intialize all buffers to NULL.

This avoids allocating/freeing memory at every function call,
checking its return value, and carrying the error around.

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

s->decoded_buffer is allocated with a min_size of:
    2 * FFALIGN(blockstodecode, 8) * sizeof(*s->decoded_buffer)

Then it is assigned to s->decoded[0] (and s->decoded_buffer + FFALIGN(blockstodecode, 8)
to s->decoded[1]) and passed as out buffer to decode_array_0000.

In this function 64 elements of the out buffer are written
unconditionally and outside the array if blockstodecode is too small.

This causes memory corruption, leading to segmentation faults or other
crashes.

Thus change decode_array_0000 to write at most blockstodecode elements
of the out buffer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

AVOpenCLDeviceNode and AVOpenCLPlatformNode used fixed static buffer for holding the device and platform name.
This patch modifies these structures to use pointers instead. The memory required to hold the names is
now dynamically allocated, the size for which is determined by querying appropriate OpenCL runtime APIs.
Signed-off-by: Maneesh Gupta <maneesh.gupta@amd.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

The opt_opencl_bench function copied the device name using strcpy without checking if the source string was larger.
This patch fixes this by replacing the strcpy with av_strlcpy, with the string copy size capped to the destination buffer size.
Signed-off-by: Maneesh Gupta <maneesh.gupta@amd.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Remove the direct profile from UTCTiming element. Per DASH spec,
direct profile value should be the time at which the request was
made to the server and not the time at which the manifest was
written. So ffmpeg cannot write this value. This patch removes
the direct profile and write the UTCTiming element with the http
profile only if a URL is passed as a parameter. Update the fate
test to reflect this change.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Otherwise range_start_decoding is not necessarily run and thus
ctx->rc.range still 0 in range_dec_normalize leading to an infinite
loop.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fix a bug where the chunk muxer doesn't write the very first audio
packet (with pts == 0).
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

The variable should not be needed anymore
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

This will test properly CRLF with make fate, make fate-subtitles and any
make fate-sub-* test. Before this commit, the rawdiff was triggered only
by make fate-subtitles.

Also make sure fate-sub-* only match the tests relying on fmtstdout
command, to at least avoid failing on MingW. See
https://ffmpeg.org/pipermail/ffmpeg-devel/2015-April/172395.html

This fixes the build with --enable-hardcoded-tables that was broken since [8f7b022c].
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

avcodec/ppc/fdctdsp: POWER LE support in ff_fdct_altivec() delete macros VEC_FMERGEH() VEC_FMERGEL(), they where wrong

GCC tool had a bug of PPC intrinsic interpret, which has been fixed in GCC 4.9.1. This bug lead to
errors in two of our previous patches. We found this when we update our GCC tools to 4.9.1 and by
reading the related info on GCC website. We fix our previous error in two separate commits
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

swscale/ppc/swscale_altivec.c: POWER LE support in yuv2planeX_8() delete macro GET_VF() it was wrong

GCC tool had a bug of PPC intrinsic interpret, which has been fixed in GCC 4.9.1. This bug lead to
errors in two of our previous patches. We found this when we update our GCC tools to 4.9.1 and by
reading the related info on GCC website. We fix our previous error in two separate commits
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Without a read function there can never be more data read than the buffer could
hold
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

HAVE_LOONGSON is replaced by HAVE_LOONGSON3. Even Loongson-2E and 2F support
Loongson SIMD instructs but have low performance for decoding. We plan to focus
on optimizing Loongson-3A1000, 3B1500 and 3A1500, and modify the configure file
to support Loongson-2 series later by adding HAVE_LOONGSON2.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>