Commit 8d662564 authored by Andreas Cadhalpun's avatar Andreas Cadhalpun

doc: fix spelling errors

Reviewed-by: 's avatarLou Logan <lou@lrcd.com>
Signed-off-by: 's avatarAndreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
parent 35af7add
......@@ -1411,7 +1411,7 @@ can be selected with @code{-pred 1}.
@table @option
@item format
Can be set to either @code{j2k} or @code{jp2} (the default) that
allows to store non-rgb pix_fmts.
makes it possible to store non-rgb pix_fmts.
@end table
......
......@@ -1118,7 +1118,7 @@ Number_of_samples
For example full key look like this @code{lavfi.astats.1.DC_offset} or
this @code{lavfi.astats.Overall.Peak_count}.
For description what each key means read bellow.
For description what each key means read below.
@item reset
Set number of frame after which stats are going to be recalculated.
......@@ -2400,7 +2400,7 @@ Amount of milliseconds the signal has to rise above the threshold before gain
reduction starts. Default is 20. Range is between 0.01 and 2000.
@item release
Amount of milliseconds the signal has to fall bellow the threshold before
Amount of milliseconds the signal has to fall below the threshold before
reduction is decreased again. Default is 250. Range is between 0.01 and 9000.
@item makeup
......@@ -4533,7 +4533,7 @@ It accepts the following options:
@item threshold1
@item threshold2
@item threshold3
Allows to limit the maximum change for each plane, default is 65535.
Limit the maximum change for each plane, default is 65535.
If 0, plane will remain unchanged.
@end table
......@@ -4738,7 +4738,7 @@ It accepts the following options:
@item threshold1
@item threshold2
@item threshold3
Allows to limit the maximum change for each plane, default is 65535.
Limit the maximum change for each plane, default is 65535.
If 0, plane will remain unchanged.
@item coordinates
......@@ -5675,7 +5675,7 @@ It accepts the following options:
@item threshold1
@item threshold2
@item threshold3
Allows to limit the maximum change for each plane, default is 65535.
Limit the maximum change for each plane, default is 65535.
If 0, plane will remain unchanged.
@item coordinates
......@@ -7369,7 +7369,7 @@ It accepts the following options:
@item threshold1
@item threshold2
@item threshold3
Allows to limit the maximum change for each plane, default is 65535.
Limit the maximum change for each plane, default is 65535.
If 0, plane will remain unchanged.
@end table
......@@ -10405,7 +10405,7 @@ stereo3d=sbsl:aybd
@end example
@item
Convert input video from above bellow (left eye above, right eye below) to side by side crosseye.
Convert input video from above below (left eye above, right eye below) to side by side crosseye.
@example
stereo3d=abl:sbsr
@end example
......
......@@ -32,7 +32,7 @@
/**
* G.726 11bit float.
* G.726 Standard uses rather odd 11bit floating point arithmentic for
* G.726 Standard uses rather odd 11bit floating point arithmetic for
* numerous occasions. It's a mystery to me why they did it this way
* instead of simply using 32bit integer arithmetic.
*/
......
......@@ -205,7 +205,7 @@ static void fill_picture_parameters(const HEVCContext *h, VAPictureParameterBuff
pp->pps_tc_offset_div2 = h->ps.pps->tc_offset / 2;
pp->log2_parallel_merge_level_minus2 = h->ps.pps->log2_parallel_merge_level - 2;
/* Diffrent chroma/luma bit depths are currently not supported by ffmpeg. */
/* Different chroma/luma bit depths are currently not supported by ffmpeg. */
pp->bit_depth_luma_minus8 = h->ps.sps->bit_depth - 8;
pp->bit_depth_chroma_minus8 = h->ps.sps->bit_depth - 8;
......
......@@ -359,7 +359,7 @@ cglobal rg_fl_mode_6, 4, 5, 16, 0, dst, src, stride, pixels
paddw m2, m7 ; c2
paddw m3, m6 ; c3
paddw m4, m5 ; c4
; As the differences (d1..d4) can only be postive, there is no need to
; As the differences (d1..d4) can only be positive, there is no need to
; clip to zero. Also, the maximum positive value is less than 768.
pminsw m1, m2
......@@ -485,7 +485,7 @@ cglobal rg_fl_mode_8, 4, 5, 16, 0, dst, src, stride, pixels
paddw m2, m7 ; c1
paddw m3, m6 ; c1
paddw m4, m5 ; c1
; As the differences (d1..d4) can only be postive, there is no need to
; As the differences (d1..d4) can only be positive, there is no need to
; clip to zero. Also, the maximum positive value is less than 768.
pminsw m1, m2
......
......@@ -1042,8 +1042,8 @@ static const GUIDParseTable gdef[] = {
{ "Mutex Language", { 0xD6, 0xE2, 0x2A, 0x00, 0x25, 0xDA, 0x11, 0xD1, 0x90, 0x34, 0x00, 0xA0, 0xC9, 0x03, 0x49, 0xBE }, asf_read_unknown, 1 },
{ "Mutex Bitrate", { 0xD6, 0xE2, 0x2A, 0x01, 0x25, 0xDA, 0x11, 0xD1, 0x90, 0x34, 0x00, 0xA0, 0xC9, 0x03, 0x49, 0xBE }, asf_read_unknown, 1 },
{ "Mutex Unknown", { 0xD6, 0xE2, 0x2A, 0x02, 0x25, 0xDA, 0x11, 0xD1, 0x90, 0x34, 0x00, 0xA0, 0xC9, 0x03, 0x49, 0xBE }, asf_read_unknown, 1 },
{ "Bandwith Sharing Exclusive", { 0xAF, 0x60, 0x60, 0xAA, 0x51, 0x97, 0x11, 0xD2, 0xB6, 0xAF, 0x00, 0xC0, 0x4F, 0xD9, 0x08, 0xE9 }, asf_read_unknown, 1 },
{ "Bandwith Sharing Partial", { 0xAF, 0x60, 0x60, 0xAB, 0x51, 0x97, 0x11, 0xD2, 0xB6, 0xAF, 0x00, 0xC0, 0x4F, 0xD9, 0x08, 0xE9 }, asf_read_unknown, 1 },
{ "Bandwidth Sharing Exclusive", { 0xAF, 0x60, 0x60, 0xAA, 0x51, 0x97, 0x11, 0xD2, 0xB6, 0xAF, 0x00, 0xC0, 0x4F, 0xD9, 0x08, 0xE9 }, asf_read_unknown, 1 },
{ "Bandwidth Sharing Partial", { 0xAF, 0x60, 0x60, 0xAB, 0x51, 0x97, 0x11, 0xD2, 0xB6, 0xAF, 0x00, 0xC0, 0x4F, 0xD9, 0x08, 0xE9 }, asf_read_unknown, 1 },
{ "Payload Extension System Timecode", { 0x39, 0x95, 0x95, 0xEC, 0x86, 0x67, 0x4E, 0x2D, 0x8F, 0xDB, 0x98, 0x81, 0x4C, 0xE7, 0x6C, 0x1E }, asf_read_unknown, 1 },
{ "Payload Extension System File Name", { 0xE1, 0x65, 0xEC, 0x0E, 0x19, 0xED, 0x45, 0xD7, 0xB4, 0xA7, 0x25, 0xCB, 0xD1, 0xE2, 0x8E, 0x9B }, asf_read_unknown, 1 },
{ "Payload Extension System Content Type", { 0xD5, 0x90, 0xDC, 0x20, 0x07, 0xBC, 0x43, 0x6C, 0x9C, 0xF7, 0xF3, 0xBB, 0xFB, 0xF1, 0xA4, 0xDC }, asf_read_unknown, 1 },
......@@ -1163,7 +1163,7 @@ static int asf_read_multiple_payload(AVFormatContext *s, AVPacket *pkt,
int ret;
int skip = 0;
// if replicated lenght is 1, subpayloads are present
// if replicated length is 1, subpayloads are present
if (asf->rep_data_len == 1) {
asf->sub_left = 1;
asf->state = READ_MULTI_SUB;
......
......@@ -151,7 +151,7 @@ static int ffm_read_data(AVFormatContext *s,
return size1 - size;
}
/* ensure that acutal seeking happens between FFM_PACKET_SIZE
/* ensure that actual seeking happens between FFM_PACKET_SIZE
and file_size - FFM_PACKET_SIZE */
static int64_t ffm_seek1(AVFormatContext *s, int64_t pos1)
{
......
......@@ -893,9 +893,9 @@ static int mov_read_adrm(MOVContext *c, AVIOContext *pb, MOVAtom atom)
}
/* drm blob processing */
avio_read(pb, output, 8); // go to offset 8, absolute postion 0x251
avio_read(pb, output, 8); // go to offset 8, absolute position 0x251
avio_read(pb, input, DRM_BLOB_SIZE);
avio_read(pb, output, 4); // go to offset 4, absolute postion 0x28d
avio_read(pb, output, 4); // go to offset 4, absolute position 0x28d
avio_read(pb, file_checksum, 20);
av_log(c->fc, AV_LOG_INFO, "[aax] file checksum == "); // required by external tools
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment