- 30 May, 2018 18 commits
-
-
Ben Smith authored
This was renamed recently in the spec. Change-Id: I825e47e8b4113ddb2c3356ee8e7663705ba65e1c Reviewed-on: https://chromium-review.googlesource.com/1079851Reviewed-by:
Andreas Haas <ahaas@chromium.org> Commit-Queue: Ben Smith <binji@chromium.org> Cr-Commit-Position: refs/heads/master@{#53448}
-
Leszek Swirski authored
Compress the parameter count (and function length) stored in SharedFunctionInfo to a uint16_t. This limits us to 2^16 - 1 parameters per function, minus one for the "don't adapt arguments" sentinel value, which is one fewer than Code::kMaxArguments was already. Anyway, 65534 arguments should be enough for anyone! This drops SFI size by 4 bytes. Bug: chromium:818642 Change-Id: I126bfb24453dcdc5087a104d3a12cf195a56fa9f Reviewed-on: https://chromium-review.googlesource.com/1076627 Commit-Queue: Leszek Swirski <leszeks@chromium.org> Reviewed-by:
Benedikt Meurer <bmeurer@chromium.org> Cr-Commit-Position: refs/heads/master@{#53447}
-
Alexey Kozyatinskiy authored
We use name of the function at the moment of first appearance of given function in stack trace. Any further name changes would be ignored. It gives us around 20% speedup. Perf analysis: https://bit.ly/2wp99vt R=yangguo@chromium.org,jgruber@chromium.org Bug: v8:7078 Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel Change-Id: I9f21f0bd9cd923e5abaeffb9209df0be2f49afff Reviewed-on: https://chromium-review.googlesource.com/1050984 Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org> Reviewed-by:
Jakob Gruber <jgruber@chromium.org> Reviewed-by:
Yang Guo <yangguo@chromium.org> Cr-Commit-Position: refs/heads/master@{#53446}
-
Alexey Kozyatinskiy authored
New intstrumentation consists of: - kAsyncFunctionSuspended when async function is suspended on await (called on each await), - kAsyncFunctionFinished when async function is finished. Old instrumentation was based on reusing async function promise. Using this promise produces couple side effects: - for any promise instrumentation we first need to check if it is special case for async function promise or not - it requires expensive reading from promise object. - we capture stack for async functions even if it does not contain awaits. - we do not properly cancel async task created for async function. New intsrumntation resolved all these problems as well as provide clear mapping between async task and generator which we can use later to fetch scope information for async functions on pause. R=dgozman@chromium.org,yangguo@chromium.org Bug: v8:7078 Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel Change-Id: Ifdcec947d91e6e3d4d5f9029bc080a19b8e23d41 Reviewed-on: https://chromium-review.googlesource.com/1043096Reviewed-by:
Sathya Gunasekaran <gsathya@chromium.org> Reviewed-by:
Dmitry Gozman <dgozman@chromium.org> Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org> Cr-Commit-Position: refs/heads/master@{#53445}
-
Tobias Tebbi authored
In Torque, we have several global singleton classes. Using the contextual variable pattern instead of passing around pointers in random places makes the code more readable. This CL does this for TypeOracle, we plan to do it for more classes in the future. Bug: v8:7754 Change-Id: Ib744b476ce51a4932c52274b2210149515f1663d Reviewed-on: https://chromium-review.googlesource.com/1078729 Commit-Queue: Tobias Tebbi <tebbi@chromium.org> Reviewed-by:
Michael Stanton <mvstanton@chromium.org> Cr-Commit-Position: refs/heads/master@{#53444}
-
Junliang Yan authored
GCC 5.4 complains type mismatch as follows: ../../v8/src/contexts.cc:302:34: error: format '%hhu' expects argument of type 'int', but argument 3 has type 'v8::internal::VariableMode' [-Werror=format=] Bug: chromium:841460 Change-Id: Id90c1211f459309e477a8ad5658cecdf9cc10938 Reviewed-on: https://chromium-review.googlesource.com/1077051Reviewed-by:
Sigurd Schneider <sigurds@chromium.org> Commit-Queue: Junliang Yan <jyan@ca.ibm.com> Cr-Commit-Position: refs/heads/master@{#53443}
-
Pierre Langlois authored
The MathPowInternal builtin is now only called directly from the code-generator. Also, this patch takes the opportunity to cleanup the builtin for arm and arm64 a little. Change-Id: If53edcecd42b227ef74ee817bc5d7fbbcea8b0e2 Reviewed-on: https://chromium-review.googlesource.com/1076127Reviewed-by:
Jaroslav Sevcik <jarin@chromium.org> Commit-Queue: Pierre Langlois <pierre.langlois@arm.com> Cr-Commit-Position: refs/heads/master@{#53442}
-
jgruber authored
Bug: v8:7754 Change-Id: I89d655129a860cd5f5d1d62600ab2df43d406974 Reviewed-on: https://chromium-review.googlesource.com/1078735Reviewed-by:
Igor Sheludko <ishell@chromium.org> Commit-Queue: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#53441}
-
Jaroslav Sevcik authored
Lowers JS calls to direct code object calls for known TFJ builtins. Bug: v8:7794 Change-Id: I68984eeeff799cae4b87e6ae6720228e90340200 Reviewed-on: https://chromium-review.googlesource.com/1078287Reviewed-by:
Tobias Tebbi <tebbi@chromium.org> Commit-Queue: Jaroslav Sevcik <jarin@chromium.org> Cr-Commit-Position: refs/heads/master@{#53440}
-
Alexey Kozyatinskiy authored
With this CL we use interrupt for pause in two cases: - when we process Debugger.pause on interruption, - when we would like to break as soon as possible after OOM. In all other cases, e.g. for async step into we use break on function call by calling StepIn debugger action. In mentioned cases we should not actually use interrupt as well: - Debugger.pause in this case scheduled using interrupt and we may just break right now without requesting another interrupt, unfortunately blink side is not ready, - we should use more reliable way to break right after near OOM callback, otherwise we can get this callback, increase limit, request break on next interrupt, before interrupt get another huge memory allocation and crash. There are couple advantages: - we get much better break locations for async stepping (see inspector tests expectations), - we can remove DEBUG_BREAK interruption (it should speedup blackboxing with async tasks, see removed todo in debug.cc for details) - it is required preparation step for async step out, (see https://chromium-review.googlesource.com/c/v8/v8/+/1054618) Bug: v8:7753 Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel Change-Id: Iabd7627dbffa9a0eab1736064caf589d02591926 Reviewed-on: https://chromium-review.googlesource.com/1054155 Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org> Reviewed-by:
-
Camillo Bruni authored
Add missing parameters to createSuiteWithWarmup Change-Id: I8865f162443b43b8b7bee4680e17c34d397f8d53 Reviewed-on: https://chromium-review.googlesource.com/1078747 Commit-Queue: Camillo Bruni <cbruni@chromium.org> Reviewed-by:
-
Marja Hölttä authored
BUG=v8:7308 Change-Id: Ide6440933d81fa82dd69d9eade9f289880ec0cb2 Reviewed-on: https://chromium-review.googlesource.com/1078308 Commit-Queue: Marja Hölttä <marja@chromium.org> Reviewed-by:
Ulan Degenbaev <ulan@chromium.org> Reviewed-by:
-
Camillo Bruni authored
Type users of AllocateFixedArray with intptr parameters. Bug: v8:7796 Change-Id: I4b155fb3fcb90fe66a3c20a24f0cea678a5d85bc Reviewed-on: https://chromium-review.googlesource.com/1078347 Commit-Queue: Camillo Bruni <cbruni@chromium.org> Reviewed-by:
-
Michael Starzinger authored
R=jgruber@chromium.org Change-Id: I9925ded8cee5c620f543171b2f93abb1f954e72e Reviewed-on: https://chromium-review.googlesource.com/1078438Reviewed-by:
-
jgruber authored
https://crrev.com/c/1075047 introduced a bug on mips/mips64 in which sp and fp offsets were set incorrectly for INTERNAL frames. Bug: v8:6666,chromium:847728,chromium:847568 Change-Id: I9a48d30a82f10a4af50f1ed4dc1d77e8defbdd77 Reviewed-on: https://chromium-review.googlesource.com/1078109 Commit-Queue: Jakob Gruber <jgruber@chromium.org> Reviewed-by:
Michael Starzinger <mstarzinger@chromium.org> Cr-Commit-Position: refs/heads/master@{#53434}
-
Ben L. Titzer authored
Extends the functionality of Managed<T> to track an estimated size for the external memory associated with an instance of Managed<T> in order to allow for proper accounting in the garbage collector. R=mstarzinger@chromium.org CC=ulan@chromium.org Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng Change-Id: I8c49c6245eaf267c9264ebb93b43d5dfbf4671fd Reviewed-on: https://chromium-review.googlesource.com/1076332 Commit-Queue: Ben Titzer <titzer@chromium.org> Reviewed-by:
-
jgruber authored
This extends the ScriptCompiler::CompileModule function with a CompileOptions argument. Accepted values are kNoCompileOptions (in which case, behavior remains unmodified) and kConsumeCodeCache. If the latter is passed, we try to fetch the given module from the code cache. Since it is possible to compile the same source code as both a script and a module (and different code is generated for the two cases), a new is_module bit is added to the SerializedCodeData header to disambiguate between the two cases. Bug: v8:7685 Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng Change-Id: I34b3642505577ed9ed0caedbee5876308c5a53ea Reviewed-on: https://chromium-review.googlesource.com/1073327 Commit-Queue: Jakob Gruber <jgruber@chromium.org> Reviewed-by:
Georg Neis <neis@chromium.org> Reviewed-by:
-
v8-autoroll authored
Rolling v8/build: https://chromium.googlesource.com/chromium/src/build/+log/39cffda..10a93c2 Rolling v8/third_party/catapult: https://chromium.googlesource.com/catapult/+log/0043a4a..8fbdf9f Rolling v8/third_party/depot_tools: https://chromium.googlesource.com/chromium/tools/depot_tools/+log/f16fdf3..cf4aced TBR=machenbach@chromium.org,hablich@chromium.org,sergiyb@chromium.org Change-Id: I3057ec6ca493b4b901ff47fd037ccab2350f5b0e Reviewed-on: https://chromium-review.googlesource.com/1077847Reviewed-by:
v8 autoroll <v8-autoroll@chromium.org> Commit-Queue: v8 autoroll <v8-autoroll@chromium.org> Cr-Commit-Position: refs/heads/master@{#53431}
-
- 29 May, 2018 22 commits
-
-
Daniel Bratell authored
builtins_util.h declares a macro named CHECK_RECEIVER and in some extreme jumbo build configurations, that macro will end up in the same translation unit as runtime-dataview.cc Bug: v8:7792 Change-Id: I6db865b6061afd6bf1c74b3a172485d68c749929 Reviewed-on: https://chromium-review.googlesource.com/1075052 Commit-Queue: Jakob Kummerow <jkummerow@chromium.org> Reviewed-by:
Jakob Kummerow <jkummerow@chromium.org> Cr-Commit-Position: refs/heads/master@{#53430}
-
Anna Henningsen authored
Document what pieces of data the global `FutexEmulation::mutex_` mutex protects from concurrent access, and reduce the scope in which said mutex is locked during `FutexEmulation::Wait()` to match that description more closely. Change-Id: I0764efabac06814d83ed5c4af4eb7da34af47cab Reviewed-on: https://chromium-review.googlesource.com/1074689 Commit-Queue: Ben Smith <binji@chromium.org> Reviewed-by:
Ben Smith <binji@chromium.org> Cr-Commit-Position: refs/heads/master@{#53429}
-
Andreas Haas authored
This CL fixes a bad interleaving that can happen between the CompilationState and streaming compilation. In that particular interleaving, streaming compilation tries to restart compilation tasks after compilation failed already, which fails with a check in the CancelableTaskManager. The problem is the following: The CompilationState notifies the streaming decoder of compilation errors. After receiving the notification, the streaming decoder ignores all subsequent incoming bytes. However, the CompilationState does not notify the streaming decoder directly, it posts a task which will notify the streaming decoder. This means that between the failing of compilation and the notification of the streaming decoder there is a time window in which compilation already failed but the streaming decoder can still restart compilation tasks. The crash happened when this time window was hit. With this CL we check that compilation did not fail before we restart compilation tasks. I was never able to reproduce this crash, so I don't really know if this particular issue caused the crash. R=titzer@chromium.org Bug: chromium:840713 Change-Id: Ic522b1c21a7d7749c1e7f6097aa450a09fb271cc Reviewed-on: https://chromium-review.googlesource.com/1075787Reviewed-by:
Ben Titzer <titzer@chromium.org> Commit-Queue: Andreas Haas <ahaas@chromium.org> Cr-Commit-Position: refs/heads/master@{#53428}
-
Junliang Yan authored
Port 75763183 Original Commit Message: The code slot of internal frames seems to be basically unused. As always, there are exceptions: 1. In elements.cc we check whether the current code object is the apply builtin. We can use a heap lookup through the frame's pc instead. 2. In isolate.cc we store a reference to the frame's code object to try and pack it into the minidump. This can safely be skipped. Remaining use-sites in frames.cc all skip INTERNAL frames by using the JavaScriptFrameIterator. R=jgruber@chromium.org, joransiu@ca.ibm.com, michael_dawson@ca.ibm.com BUG= LOG=N Change-Id: I3612b206f25b9e53645d2e1bc726a5e318a1f4be Reviewed-on: https://chromium-review.googlesource.com/1076505Reviewed-by:
Joran Siu <joransiu@ca.ibm.com> Commit-Queue: Junliang Yan <jyan@ca.ibm.com> Cr-Commit-Position: refs/heads/master@{#53427}
-
Junliang Yan authored
Port b2abe2cf Original Commit Message: This makes the WasmCompileLazy builtin push a new WASM_COMPILE_LAZY frame type. We can thereby remove the workaround to return a relocated instance from the underlying runtime function. It also removes the last remaining embedded code objects from {WasmCode} objects. R=mstarzinger@chromium.org, joransiu@ca.ibm.com, michael_dawson@ca.ibm.com BUG= LOG=N Change-Id: Icdc1ee06a1fade4bb805ae0fadf8219316731cd7 Reviewed-on: https://chromium-review.googlesource.com/1076529Reviewed-by:
-
Eric Holk authored
This is no longer needed now that Wasm is more aggressive about collecting old memories. It also causes problems with the upcoming trap handler fallback path. Change-Id: I4b8513c28e0c0d7c6b232d399c1d97b645499ef1 Reviewed-on: https://chromium-review.googlesource.com/1043277Reviewed-by:
Deepti Gandluri <gdeepti@chromium.org> Commit-Queue: Eric Holk <eholk@chromium.org> Cr-Commit-Position: refs/heads/master@{#53425}
-
Vincent Belliard authored
Bug: v8:6600 Change-Id: I8662ac3589a6244565402c748624ea03d3e31960 Reviewed-on: https://chromium-review.googlesource.com/1071719Reviewed-by:
-
Junliang Yan authored
Port 0a373f8a Original Commit Message: This is the initial step towards moving all array constructor stubs to builtins. R=jgruber@chromium.org, joransiu@ca.ibm.com, michael_dawson@ca.ibm.com BUG= LOG=N Change-Id: I3b46a3bd91780c2be938f710ceb18a7a8cd1824e Reviewed-on: https://chromium-review.googlesource.com/1076595Reviewed-by:
-
Andreas Haas authored
This CL switches to the new taskrunner API in the MemoryReducer. We want to remove the old API eventually so that there is only one API for task posting. R=ulan@chromium.org CC=gab@chromium.org Change-Id: I1dd16e42dc0fca013a97c76dfce9c6479b97521b Reviewed-on: https://chromium-review.googlesource.com/1061531Reviewed-by:
Hannes Payer <hpayer@chromium.org> Commit-Queue: Andreas Haas <ahaas@chromium.org> Cr-Commit-Position: refs/heads/master@{#53422}
-
Simon Zünd authored
This CL creates the "tools/torque" directory. It moves the existing two scripts (making the parser and formatting Torque code) into that director. The extension lives in "tools/torque/vscode-torque" and currently only provides basic syntax highlighting support. The easiest way to install the extension is to simply create a symlink into your local vscode extension directory (see README.md). R=jgruber@chromium.org, tebbi@chromium.org Change-Id: Ifc22b615341ed18f91c9b046090f569fcc083ab6 Reviewed-on: https://chromium-review.googlesource.com/1076548 Commit-Queue: Simon Zünd <szuend@google.com> Reviewed-by:
-
Simon Zünd authored
The regression test 2185-2 measured the Array.p.sort time for various pre-sorted data configurations. This CL adds the various data configurations to the ArraySortPreSorted benchmark and removes the regression test altogether. R=cbruni@chromium.org, jgruber@chromium.org Change-Id: I6e2eb235e4a7578f4a107229bfc6a9e89a3aa5e3 Reviewed-on: https://chromium-review.googlesource.com/1076188 Commit-Queue: Simon Zünd <szuend@google.com> Reviewed-by:
Camillo Bruni <cbruni@chromium.org> Cr-Commit-Position: refs/heads/master@{#53420}
-
🎉 Mathias Bynens authoredIntent to ship: https://groups.google.com/d/msg/v8-users/15GL4-UHEcE/OEKOou3bBgAJ Bug: v8:7220 Change-Id: Ib1efde29e27b956db3d8ebf12ff7a3f163db7c22 Reviewed-on: https://chromium-review.googlesource.com/1076335Reviewed-by:
-
Camillo Bruni authored
Change-Id: I7bf0144bacd0572a42b98d0a0f19df3daf63128b Bug: chromium:840785 Reviewed-on: https://chromium-review.googlesource.com/1051240 Commit-Queue: Camillo Bruni <cbruni@chromium.org> Reviewed-by:
Peter Marshall <petermarshall@chromium.org> Cr-Commit-Position: refs/heads/master@{#53418}
-
Junliang Yan authored
Port c52b7af5 R=jgruber@chromium.org, joransiu@ca.ibm.com, michael_dawson@ca.ibm.com BUG= LOG=N Change-Id: I75ec0305f618336ce63fb664ae356dfcf48948c4 Reviewed-on: https://chromium-review.googlesource.com/1075468Reviewed-by:
-
Simon Zünd authored
This CL is a proposal to add "checked" casts (CAST in CSA) to the Torque language. The CL adds the "unsafe_cast<>" operator that emits a "CAST". Example: let n: Number = ...; ... if (TaggedIsSmi(n)) { let m: Smi = unsafe_cast<Smi>(n); ... } The cast wont incur a runtime overhead now. R=tebbi@chromium.org Change-Id: I9fca90d1d11e61617ba0270e5022fd66200e2195 Reviewed-on: https://chromium-review.googlesource.com/1070151 Commit-Queue: Simon Zünd <szuend@google.com> Reviewed-by: -
Anna Henningsen authored
This adds a convenience overload for `EscapableHandleScope::Escape()` which moves `MaybeLocal<T>`s into the outer scope, like a regular `Local<T>`. This basically moves the syntactic clutter of having to write `maybe_local.FromMaybe(Local<Foo>())` instead of just `maybe_local` to a central location. Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng Change-Id: I1d87d75c6564b10e8ec34957bdd3eac46ffea917 Reviewed-on: https://chromium-review.googlesource.com/1056529Reviewed-by:
-
Tobias Nießen authored
This change fixes the usage message of arm, mips, mips64, ppc and s390 simulators. Change-Id: Ib00d3049cb1c81c2653ee8b66d21eabde8f16f76 Reviewed-on: https://chromium-review.googlesource.com/1059623Reviewed-by:
-
Sebastien Marchand authored
see crbug.com/841460 , we recently hit some build issues when using Goma + jumbo builds because of a conflict on the definition of CONST, v8 defines it in globals.h and including windows.h also defines it. It should be possible to fix this by adding a bunch of #undef CONST but it seems a little bit hacky and might not always work (this could only fix the problem temporary if the jumbo merge limit changes and cause some include files to get included in a different order). Renaming the v8 definition of CONST to kConst, this follows the style guide guidelines: "there is no reason to change old code to use constant-style names, unless the old names are actually causing a compile-time problem" (https://google.github.io/styleguide/cppguide.html#Enumerator_Names) I also had to turn the PropertyConstness enum into an enum class to avoid some conflicts (both PropertyConstness and VariableMode define kConst). Bug: chromium:841460 Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng Change-Id: I2b70b9095374e88a5ae364cc557b39f20a3ab60f Reviewed-on: https://chromium-review.googlesource.com/1064197Reviewed-by:
Leszek Swirski <leszeks@chromium.org> Reviewed-by:
Toon Verwaest <verwaest@chromium.org> Reviewed-by:
-
Mathias Bynens authored
Proposal repo: https://tc39.github.io/proposal-flatMap/ Bug: v8:7220 Change-Id: I79022fe26c609225dce21c0b45e8bedff12cc7b5 Reviewed-on: https://chromium-review.googlesource.com/1076427Reviewed-by:
-
Tobias Tebbi authored
This adds support for union types to Torque. There is a new type expression A | B to form the union of the type expressions A and B. This is only possible if A and B have a common supertype, to prevent nonsensical unions of types with different representations. Union types are normalized: A | B == B | A A | (B | C) == (A | B) | C A | A == A The subtyping rules are defined recursively: (A | B) <: C if A <: C and B <: C A <: (B | C) if A <: B or A <: C This allows to define Object as a union type: type Tagged generates 'TNode<Object>'; type Smi extends Tagged generates 'TNode<Smi>'; type HeapObject extends Tagged generates 'TNode<HeapObject>'; type Object = Smi | HeapObject; The type {Tagged} is introduced to have a common supertype of all tagged values, but we should not use it directly, because {Object} contains the additional information that there is nothing but {Smi} and {HeapObject} values. When mapping union types to CSA types, we select the most specific common supertype. For Number and Numeric, we already use union types on the CSA side. Since it is not possible to map to CSA union types in general, we special-case these two union types to map them to the CSA union types we already use. Bug: v8:7793 Change-Id: I7a4e466436f55d04012f29ef17acfdb957653908 Reviewed-on: https://chromium-review.googlesource.com/1076132Reviewed-by: -
Marja Hölttä authored
WeakFixedArray::Shrink is fragile when not used properly (might invalidate GC bookeeping (location of weak slots)). BUG=v8:7308 Change-Id: Id84329e2a78907f5f0bfafae32fc2a71b77edbe7 Reviewed-on: https://chromium-review.googlesource.com/1076236Reviewed-by:
-
jgruber authored
The code slot of internal frames seems to be basically unused. As always, there are exceptions: 1. In elements.cc we check whether the current code object is the apply builtin. We can use a heap lookup through the frame's pc instead. 2. In isolate.cc we store a reference to the frame's code object to try and pack it into the minidump. This can safely be skipped. Remaining use-sites in frames.cc all skip INTERNAL frames by using the JavaScriptFrameIterator. Bug: v8:6666 Change-Id: I93c5035812838bbae5109415450915db12497b9c Reviewed-on: https://chromium-review.googlesource.com/1075047 Commit-Queue: Jakob Gruber <jgruber@chromium.org> Reviewed-by:
-
