This CL adds support for primitive maps to
1) PrototypeIterator,
2) PropertyHandlerCompiler::CheckPrototypes(),
3) Map::GetOrCreatePrototypeChainValidityCell(),
4) Prototype checks in data-driven ICs.

BUG=v8:5561

Review-Url: https://codereview.chromium.org/2466553002
Cr-Commit-Position: refs/heads/master@{#40673}

This exposes a couple of broken tests that used to silently throw within
the listener. Mark these as failing for now

BUG=v8:5330, v8:5581

Review-Url: https://codereview.chromium.org/2460833002
Cr-Commit-Position: refs/heads/master@{#40672}

Using a global proxy (e.g. 'window.f', 'w.f' or 'this.f') is considerably slower than evaluating just 'f'. This CL aims to perform the necessary checks at compile time and inline the accesses.

This is a follow-on CL to crrev.com/2369933005:
- The initial upload is crrev.com/2369933005 + a rebase.
- The remaining issues are the fixes requested by the reviewers on that CL.

BUG=chromium:634276, chromium:654716, chromium:656959

Committed: https://crrev.com/8f43d748272536117008aa6a1b53ea52126261c1
Committed: https://crrev.com/041314524952a3c1bc71bd3beafbbb37319f1d22
Review-Url: https://codereview.chromium.org/2403003002
Cr-Original-Original-Commit-Position: refs/heads/master@{#40153}
Cr-Original-Commit-Position: refs/heads/master@{#40365}
Cr-Commit-Position: refs/heads/master@{#40671}

BUG=v8:5588
R=verwaest@chromium.org

Review-Url: https://codereview.chromium.org/2467463002
Cr-Commit-Position: refs/heads/master@{#40670}

ZeroConstant is a NumberConstant, so does not get matched
in IntMatchers, which results in missing some opportunities
in instruction selection. Use IntPtrConstant instead, which
generates an Int32Constant or an Int64Constant depending on
the word size.

BUG=

Review-Url: https://codereview.chromium.org/2467473002
Cr-Commit-Position: refs/heads/master@{#40669}

It's marked as [PASS, FAIL] but keeps showing up as a test failure for me.

R=mstarzinger@chromium.org
BUG=v8:5587

Review-Url: https://codereview.chromium.org/2461343002
Cr-Commit-Position: refs/heads/master@{#40668}

Due to a typo wasm-run-utils used the type of the first parameter for
all parameters. This caused problems if not all parameters had the same
type.

R=titzer@chromium.org, clemensh@chromium.org

Review-Url: https://codereview.chromium.org/2463743002
Cr-Commit-Position: refs/heads/master@{#40667}

R=ishell@chromium.org
BUG=

Review-Url: https://codereview.chromium.org/2461463003
Cr-Commit-Position: refs/heads/master@{#40666}

R=mstarzinger@chromium.org
BUG=v8:5267

Review-Url: https://codereview.chromium.org/2460333002
Cr-Commit-Position: refs/heads/master@{#40665}

Similar to what crankshaft does, we introduce a mapcheck if necessary and a call to the CallApiCallbackStub.

BUG=

Review-Url: https://codereview.chromium.org/2458643002
Cr-Commit-Position: refs/heads/master@{#40664}

This enables Ignition unconditionally for all code that is destined for
optimization with TurboFan. This ensures all optimization attempts will
go through the BytecodeGraphBuilder and that the AstGraphBuilder pipe is
dried out in practice.

patch from issue 2427953002 at patchset 120001 (http://crrev.com/2427953002#ps120001)

R=mvstanton@chromium.org,rmcilroy@chromium.org

Review-Url: https://codereview.chromium.org/2453973004
Cr-Commit-Position: refs/heads/master@{#40663}

Conflicting type feedback on Load/StoreICs can lead to out-of-bounds
field access, which is essentially dead code, but EscapeAnalysis was
confused about those. For now, mark the objects as escaping in these
cases, middle-term we want to deal better with this kind of compile-
time known dead code.

BUG=chromium:658185,v8:4586
R=jarin@chromium.org

Review-Url: https://codereview.chromium.org/2459273002
Cr-Commit-Position: refs/heads/master@{#40662}

This CL implements basic table import functionality.

Missing: growing of tables (WebAssembly.Grow) doesn't change dispatch tables
Missing: allowing larger table imports than minimum size

R=rossberg@chromium.org,bradnelson@chromium.org
BUG=v8:5507

Review-Url: https://codereview.chromium.org/2454503005
Cr-Commit-Position: refs/heads/master@{#40661}

* Introduced DebugInterface::Script - native wrapper on internal::Script.
* Migrated getCompildScripts and scriptParsed to native wrapper.

BUG=chromium:652939, v8:5510
R=yangguo@chromium.org,dgozman@chromium.org
CQ_INCLUDE_TRYBOTS=master.tryserver.blink:linux_precise_blink_rel

Review-Url: https://codereview.chromium.org/2449213002
Cr-Commit-Position: refs/heads/master@{#40660}

This patch implements TracingCategoryObserver to set global flag when a V8
specific category is enabled. Previously, we set a global flag each time when we
encounter a top level trace event, and use it as a global check. With this
patch, we can set a group of flags when tracing is enabled; besides, we make
V8 tracing feature use V8 flags instead of defining its own flag in a messy way.

With this patch, whatever V8 flag we want to imply in tracing, we define another
integer flag, and the original V8 flag will set it to 0x01 when passing by
commandline, tracing will set it to 0x10 when we start tracing and reset the bit
when we stop tracing.

Review-Url: https://codereview.chromium.org/2436273002
Cr-Commit-Position: refs/heads/master@{#40659}

These are added to the sampler stack trace when RCS are
enabled.
Resource name for a RCS frame is reported as "V8Runtime".
Counter names match ones from src/counters.h

BUG=chromium:660428

Review-Url: https://codereview.chromium.org/2461003002
Cr-Commit-Position: refs/heads/master@{#40658}

BUG=chromium:660457
TBR=mbarbella@chromium.org, yangguo@chromium.org

Review-Url: https://codereview.chromium.org/2464453002
Cr-Commit-Position: refs/heads/master@{#40657}

Revert of [wasm] Support for restricted table imports. (patchset #7 id:120001 of https://codereview.chromium.org/2454503005/ )

Reason for revert:
GC stress failures:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20GC%20Stress%20-%20custom%20snapshot/builds/8857

Original issue's description:
> [wasm] Support for restricted table imports.
>
> This CL implements basic table import functionality.
>
> Missing: growing of tables (WebAssembly.Grow) doesn't change dispatch tables
> Missing: allowing larger table imports than minimum size
>
> R=rossberg@chromium.org,bradnelson@chromium.org
> BUG=v8:5507

TBR=bradnelson@chromium.org,rossberg@chromium.org,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5507

Review-Url: https://codereview.chromium.org/2456193006
Cr-Commit-Position: refs/heads/master@{#40656}

When Chromium and V8 use the same version of inspector_protocol, any protocol change takes at least 4 patches and 3 waiting for rolls.
To simplify this process we need to have two diffrent versions of inspector_protocol in Chromium and V8. Current state of inspector_protocol was extracted into separate repository [1]. This CL puts last version of inspector_protocol into third_party/inspector_protocol and removes dependency on inspector_protocol in Webkit.

[1] https://chromium.googlesource.com/deps/inspector_protocol/

BUG=chromium:637032
R=dgozman@chromium.org
CQ_INCLUDE_TRYBOTS=master.tryserver.blink:linux_precise_blink_rel

Review-Url: https://codereview.chromium.org/2447323002
Cr-Commit-Position: refs/heads/master@{#40655}

BUG=

Review-Url: https://codereview.chromium.org/2460773003
Cr-Commit-Position: refs/heads/master@{#40654}

Previously we reset runtime counters and dump them when we enter, exit top level
trace events respectively. However, there is gap between two top level trace
events and runtime counters may be activated, resetting the counters makes the
accumulated time inaccurate, and we may end up with negative time due to the
nature of how we accumulate time.

This patch fixes this problem by only resetting counters when there's no
counters active, and before dump counters, we traverse current active counters
to calculate their time, and then restart their timer.

BUG=chromium:658145

Review-Url: https://codereview.chromium.org/2457523002
Cr-Commit-Position: refs/heads/master@{#40653}

This CL implements basic table import functionality.

Missing: growing of tables (WebAssembly.Grow) doesn't change dispatch tables
Missing: allowing larger table imports than minimum size

R=rossberg@chromium.org,bradnelson@chromium.org
BUG=v8:5507

Review-Url: https://codereview.chromium.org/2454503005
Cr-Commit-Position: refs/heads/master@{#40652}

candidates.

BUG=chromium:650314

Review-Url: https://codereview.chromium.org/2459003002
Cr-Commit-Position: refs/heads/master@{#40651}

Revert of [heap] Concurrent store buffer processing. (patchset #13 id:260001 of https://codereview.chromium.org/2453673003/ )

Reason for revert:
Seems to block rolling:
https://codereview.chromium.org/2447393005/

Original issue's description:
> [heap] Concurrent store buffer processing.
>
> BUG=chromium:648973, chromium:648568

TBR=ulan@chromium.org,mlippautz@chromium.org,hpayer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:648973, chromium:648568

Review-Url: https://codereview.chromium.org/2449853010
Cr-Commit-Position: refs/heads/master@{#40650}

R=gsathya@chromium.org
BUG=v8:1569

Review-Url: https://codereview.chromium.org/2460883002
Cr-Commit-Position: refs/heads/master@{#40649}

This is useful for things that don't ever change, but we don't want to
eagerly compute the result.

Doing this from the embedder is difficult, using DefineOwnProperty would
read the property to get the property descriptor, creating an endless
recursion.

R=verwaest@chromium.org,haraken@chromium.org
BUG=

Review-Url: https://codereview.chromium.org/2449783006
Cr-Commit-Position: refs/heads/master@{#40648}

Cancelable task already guarantees proper waiting.

BUG=

Review-Url: https://codereview.chromium.org/2462553002
Cr-Commit-Position: refs/heads/master@{#40647}

R=titzer@chromium.org
TEST=mjsunit/wasm/start-function

Review-Url: https://codereview.chromium.org/2458983002
Cr-Commit-Position: refs/heads/master@{#40646}

Otherwise, we don't account for callbacks from optimized code anymore.

R=verwaest@chromium.org,cbruni@chromium.org
BUG=

Review-Url: https://codereview.chromium.org/2459573002
Cr-Commit-Position: refs/heads/master@{#40645}

The order is important for DEFINE_IMPLICATION to ensure transitive
implication: predictable => single_threaded => !concurrent_sweeping.

BUG=5580

Review-Url: https://codereview.chromium.org/2456323002
Cr-Commit-Position: refs/heads/master@{#40644}

R=bmeurer@chromium.org

Review-Url: https://codereview.chromium.org/2457763003
Cr-Commit-Position: refs/heads/master@{#40643}

BUG=chromium:648973, chromium:648568

Review-Url: https://codereview.chromium.org/2453673003
Cr-Commit-Position: refs/heads/master@{#40642}

The majority of context slot accesses are to the local context (current context
register and depth 0), so this adds bytecodes to optimise for that case.

This cuts down bytecode size by roughly 1% (measured on Octane and Top25).

Review-Url: https://codereview.chromium.org/2459513002
Cr-Commit-Position: refs/heads/master@{#40641}

... because the latter unlike the former records meaningful position.

BUG=

Review-Url: https://codereview.chromium.org/2456193005
Cr-Commit-Position: refs/heads/master@{#40640}

This flag is on by default for now. Whenever heuristics in the compiler
pipeline decide to use Ignition+TurboFan, then {BytecodeGraphBuilder} is
active. Removing the flag reduces maintenance overhead.

R=mvstanton@chromium.org

Review-Url: https://codereview.chromium.org/2437103002
Cr-Commit-Position: refs/heads/master@{#40639}

BUG=

Review-Url: https://codereview.chromium.org/2446073002
Cr-Commit-Position: refs/heads/master@{#40638}

TEST=ctest/test-scanner-streams/CharacterStreams
BUG=

Review-Url: https://codereview.chromium.org/2415093002
Cr-Commit-Position: refs/heads/master@{#40637}

This CL adds simple implementation of break and stepping-related functionality
as required by the debug-step.js test. This includes

* stepOver, stepInto, stepOut
* setBreakPoint
* clearBreakPoint
* evaluate

Some of these, e.g. setBreakPoint are not fully implemented for all cases but
only for the ones we need right now.

One interesting result of this is that using the inspector protocol is roughly
14x slower for debug-step.js (14s instead of 0.5s). One cause of this seems to
be iteration over all object properties in toProtocolValue, which is used to
serialize JS objects before being sent over the wire (e.g. FrameMirrors).  This
is something that should be fixed at some point. In the meantime, the test now
runs 100 instead of 1000 iterations.

BUG=v8:5530

Review-Url: https://codereview.chromium.org/2447073007
Cr-Commit-Position: refs/heads/master@{#40636}

This adds a wrapper class around the inspector protocol for use in
debugger tests. The interface is intended to stay similar to the
currently exposed DebuggerContext.

Right now, we support adding a listener, (partial) handling of the
AfterCompile event, and enabling/disabling the debugger.

BUG=v8:5530

Review-Url: https://codereview.chromium.org/2451153003
Cr-Commit-Position: refs/heads/master@{#40635}

BUG=v8:5339

Review-Url: https://codereview.chromium.org/2452923002
Cr-Commit-Position: refs/heads/master@{#40634}