- 09 Jun, 2017 2 commits
-
-
Michael Starzinger authored
Both Ignition and TurboFan have been enabled by default for a while. This just disentangles the implication between those two flags and sets the --ignition individually. They can now be controlled individually. R=rmcilroy@chromium.org BUG=v8:6408 Change-Id: I08eca85120160efa5868b5ca36d1613964ed82eb Reviewed-on: https://chromium-review.googlesource.com/527637Reviewed-by:
Ross McIlroy <rmcilroy@chromium.org> Reviewed-by:
Michael Achenbach <machenbach@chromium.org> Commit-Queue: Michael Starzinger <mstarzinger@chromium.org> Cr-Commit-Position: refs/heads/master@{#45800}
-
v8-autoroll authored
Rolling v8/build: https://chromium.googlesource.com/chromium/src/build/+log/9d6666d..41581bc Rolling v8/tools/swarming_client: https://chromium.googlesource.com/external/swarming.client/+log/5c4eed8..af6b06c TBR=machenbach@chromium.org,vogelheim@chromium.org,hablich@chromium.org Change-Id: If888be1ca55a3eda40e6e6dd7e38f351d3b3ab6d Reviewed-on: https://chromium-review.googlesource.com/527359Reviewed-by:
v8 autoroll <v8-autoroll@chromium.org> Commit-Queue: v8 autoroll <v8-autoroll@chromium.org> Cr-Commit-Position: refs/heads/master@{#45799}
-
- 08 Jun, 2017 22 commits
-
-
bjaideep authored
Port 90c3a2d5 Original Commit Message: This CL contains a few pieces: - A new mechanism to create "BuiltinContinuation" checkpoints in TurboFan graphs, which--when triggered--swizzle the values in the the FrameState to be parameters to a typically TF-generated builtin that resumes execution to finish the slow-case functionality. - Continuation builtins that have special handling in the deoptimizer and their own new frame type to ensure that the values they need to begin executing can be stashed away and restored immediately before the builtin is called via a trampoline that runs when the continuation builtin's frame execution resumes. - An implementation of Array.prototype.forEach in TurboFan that can be used to inline it. The inlined forEach implementation uses the checkpoints mechanism described above to deopt in the middle of the forEach in the cases that optimization invariants are violated. There is a slightly different continuation stub for each deopt point in the forEach implementation to ensure the correct side-effects, i.e. that the deopt of the builtin isn't programmatically observable. R=danno@chromium.org, joransiu@ca.ibm.com, jyan@ca.ibm.com, michael_dawson@ca.ibm.com BUG= LOG=N Review-Url: https://codereview.chromium.org/2926043005 Cr-Commit-Position: refs/heads/master@{#45798}
-
machenbach authored
Revert of [heap] Use larger marking steps during external allocation pressure (patchset #4 id:60001 of https://codereview.chromium.org/2927553003/ ) Reason for revert: Blocks the roll. Fails some layout tests: https://build.chromium.org/p/tryserver.v8/builders/v8_linux_blink_rel/builds/21757 STDERR: # Fatal error in ../../v8/src/heap/heap.cc, line 957 STDERR: # Check failed: 1.0 <= pressure (1 vs. -0.00503761). Original issue's description: > [heap] Use larger marking steps during external allocation pressure > > BUG=chromium:626082, chromium:728228 > > Review-Url: https://codereview.chromium.org/2927553003 > Cr-Commit-Position: refs/heads/master@{#45784} > Committed: https://chromium.googlesource.com/v8/v8/+/8d75644fc0ce1cee5d6eca42006f4c4aa89e9b86 TBR=ulan@chromium.org,hpayer@chromium.org # Skipping CQ checks because original CL landed less than 1 days ago. NOPRESUBMIT=true NOTREECHECKS=true NOTRY=true BUG=chromium:626082, chromium:728228 Review-Url: https://codereview.chromium.org/2925333002 Cr-Commit-Position: refs/heads/master@{#45797}
-
bjaideep authored
Port d3371c23 Original Commit Message: DebugInfo was very closely tied to break point support: * It contained only information relevant to break points. * It was created and freed by break point implementation. * Existence of a DebugInfo on the shared function info implied existence of break points. This CL is a step towards making DebugInfo usable by other debugging functionality such as block coverage by decoupling it from break point support, which is now only one kind of information stored on the DebugInfo object. R=jgruber@chromium.org, joransiu@ca.ibm.com, jyan@ca.ibm.com, michael_dawson@ca.ibm.com BUG=v8:6000 LOG=N Review-Url: https://codereview.chromium.org/2927813004 Cr-Commit-Position: refs/heads/master@{#45796}
-
bbudge authored
- Eliminates b1x4, b1x8, and b1x16 as distinct WASM types. - All vector comparisons return v128 type. - Eliminates b1xN and, or, xor, not. - Selects take a v128 mask vector and are now bit-wise. - Adds a new test for Select, where mask is non-canonical (not 0's and -1's). LOG=N BUG=v8:6020 Review-Url: https://codereview.chromium.org/2919203002 Cr-Commit-Position: refs/heads/master@{#45795}
-
bmeurer authored
This splits the monolithic Apply builtin into several smaller builtins, namely CallVargargs and ConstructVarargs, which accept a length and a FixedArray of elements and deal with the actual stack manipulation, and CallWithArrayLike / ConstructWithArrayLike that deal with getting the elements from the receiver (for Function.prototype.apply, Reflect.apply and Reflect.construct), which can now be written using the CSA. The idea is that these builtins can be reused by TurboFan directly in the future when we optimize apply better, and that we can also reuse the core logic in the handling of spread calls/constructs. R=petermarshall@chromium.org BUG=v8:4587,v8:5269 Review-Url: https://codereview.chromium.org/2930623002 Cr-Commit-Position: refs/heads/master@{#45794}
-
sampsong authored
Port 659e8f7b Original Commit Message: Instead of allocating and embedding certain heap numbers into the code during code assembly, emit dummies but record the allocation requests. Later then, in Assembler::GetCode, allocate the heap numbers and patch the code by replacing the dummies with the actual objects. The RelocInfos for the embedded objects are already recorded correctly when emitting the dummies. R=neis@chromium.org, joransiu@ca.ibm.com, jyan@ca.ibm.com, bjaideep@ca.ibm.com, michael_dawson@ca.ibm.com BUG=v8:6048 LOG=N Review-Url: https://codereview.chromium.org/2929843002 Cr-Commit-Position: refs/heads/master@{#45793}
-
Ulan Degenbaev authored
concurrent sweeping is disabled, which is not correct. MemoryAllocator: :CanFreeMemoryChunk returns true for the case when Change-Id: I560bac0275473445b52fba28b5e647b54f523a3a Reviewed-on: https://chromium-review.googlesource.com/528081Reviewed-by:
Hannes Payer <hpayer@chromium.org> Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Cr-Commit-Position: refs/heads/master@{#45792}
-
kschimpf authored
This CL takes advantage of the fact that StatsCounter is now local to the Counters class. This includes: 1) Method StatsTable::SetCreateHistogramFunction() was only called in one spot (in api.cc), which also called Counters::ResetHistograms() and Counters::InitializeHistorgram(). InitializeHistogram can be folded into Histogram.Reset(). 2) Since Histogram::Reset() now regenerats the histogram, we no longer need the field lookup_done_. Therefore there is no longer a race between updating ptr_ and lookup_done_, making the Histogram class thread safe. 3) Made the constructors of several classes private (except for class Counters), minimizing the scope that they are used. When the couldn't be moved, add comment that they were public only for test cases. 4) Removed the need for a mutex lock on StatsCounter::Reset(), since it is now guaranteed to only be called when StatsTable::SetCounterFunction() is called. BUG=v8:6361 CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_rel_ng Review-Url: https://codereview.chromium.org/2918703002 Cr-Commit-Position: refs/heads/master@{#45791}
-
Toon Verwaest authored
[builtins] Make sure to perform ToPrimitive(key, hint string) in hasOwnProperty even if the receiver is a smi. Bug: chromium:707580 Change-Id: I38f8740ac0df5d5e4e99808e4fa20bae88a23a11 Reviewed-on: https://chromium-review.googlesource.com/528077Reviewed-by:
Jakob Kummerow <jkummerow@chromium.org> Commit-Queue: Toon Verwaest <verwaest@chromium.org> Cr-Commit-Position: refs/heads/master@{#45790}
-
Michael Starzinger authored
Both TurboFan and ThinStrings have been enabled by default for a while. This just disentangles the implication between those two flags and sets the --thin-strings individually. There is no technical reason for the implication. R=jkummerow@chromium.org Change-Id: I26e5357ffaf953de897c76d6edb8ac640bbeafd0 Reviewed-on: https://chromium-review.googlesource.com/528076Reviewed-by:
-
v8-autoroll authored
Rolling v8/build: https://chromium.googlesource.com/chromium/src/build/+log/4161431..9d6666d TBR=machenbach@chromium.org,vogelheim@chromium.org,hablich@chromium.org Change-Id: I3bddd9d99ea1840cce06dcb2c5b2bed33d2e7a7b Reviewed-on: https://chromium-review.googlesource.com/527576Reviewed-by:
-
Sathya Gunasekaran authored
Bug: v8:5717 Change-Id: I03579764656aa743bbc9bbf08e6affecd626d73d Reviewed-on: https://chromium-review.googlesource.com/527338Reviewed-by:
Jakob Gruber <jgruber@chromium.org> Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org> Cr-Commit-Position: refs/heads/master@{#45787}
-
Ross McIlroy authored
Add the ability for the typer to track whether a string could be the empty string. This is needed for typed lowering of JSStringConcat since we can't create cons string chain with the empty string in arbitrary positions. The ToPrimitiveToString bytecode handler is modified to collect feedback on whether it has ever seen the empty string, which is used by SpeculativeToPrimitiveToString to ensure that the output is non-empty (or depot) which will subsiquently be used to enable inline cons-string creation for the JSStringConcat operator in typed lowering in a subsiquent CL. BUG=v8:6243 Change-Id: I41b99b59798993f756aada8cff90fb137d65ea52 Reviewed-on: https://chromium-review.googlesource.com/522122 Commit-Queue: Ross McIlroy <rmcilroy@chromium.org> Reviewed-by:
Jaroslav Sevcik <jarin@chromium.org> Cr-Commit-Position: refs/heads/master@{#45786}
-
Michael Starzinger authored
The variant in question was intended to test Crankshaft, which is being deprecated. Note that the variants 'nooptimization' and 'fullcode' still test configuration where TurboFan is not active. R=machenbach@chromium.org BUG=v8:6408 Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng Change-Id: I587c3eee7ba511dfc270aab66b546d2532bc635f Reviewed-on: https://chromium-review.googlesource.com/528133Reviewed-by:
-
hpayer authored
BUG=chromium:626082, chromium:728228 Review-Url: https://codereview.chromium.org/2927553003 Cr-Commit-Position: refs/heads/master@{#45784}
-
Mythri authored
ThrowIfHole bytecodes were handled by introducing deopt points to check for a hole. To avoid deopt loops a hole check protector was used to generate control flow if there was a deopt due to a hole. However, the normal control flow version should be as fast as the deopt version in general. The deopt version could potentially consume less compile time but it may not be worth the complexity added. Hence simplifying it to only construct the control flow. Bug: v8:6383 Change-Id: Icace11f7a6e21e64e1cebd104496e3f559bc85f7 Reviewed-on: https://chromium-review.googlesource.com/525573Reviewed-by:
Michael Starzinger <mstarzinger@chromium.org> Reviewed-by:
-
Michael Starzinger authored
This removes the last remaining dual implications between sets of flags. Support for this was originally added to support multiple subsequent calls to {SetFlagFromString} switching a set of flags on and off. Now that Chrome no longer relies on this behavior we can remove support for this entirely. Original CL: https://crrev.com/f774d8c56f00de92614886fc4cb541411eff7aa1 R=rmcilroy@chromium.org BUG=v8:6408 Change-Id: I5f9db8457c562c0b434ea7d6eca9941c76fe7d19 Reviewed-on: https://chromium-review.googlesource.com/527174Reviewed-by: -
Toon Verwaest authored
Don't treat new prototypes differently depending on how they become a prototype. This is work towards always keeping prototypes in slow-mode. Bug: v8:6471 Change-Id: I62de1018e21d91fda3a5da044615f32c718910b1 Reviewed-on: https://chromium-review.googlesource.com/526596Reviewed-by:
-
gdeepti authored
Review-Url: https://codereview.chromium.org/2930833002 Cr-Commit-Position: refs/heads/master@{#45780}
-
jgruber authored
This adds block coverage support for simple iteration. For-of and for-in loops are not yet covered, and we don't yet keep execution counts for init, cond, and next statements. BUG=v8:6000 Change-Id: I30b468a2c93f0bb60e857b6632be92920f6857e0 Reviewed-on: https://chromium-review.googlesource.com/527113 Commit-Queue: Jakob Gruber <jgruber@chromium.org> Reviewed-by:
Marja Hölttä <marja@chromium.org> Reviewed-by:
-
v8-autoroll authored
Rolling v8/build: https://chromium.googlesource.com/chromium/src/build/+log/d122cd7..4161431 Rolling v8/third_party/catapult: https://chromium.googlesource.com/external/github.com/catapult-project/catapult/+log/3919ea6..32bdd96 TBR=machenbach@chromium.org,vogelheim@chromium.org,hablich@chromium.org Change-Id: I89800f7149815faaf1c83764275b09d206515055 Reviewed-on: https://chromium-review.googlesource.com/527481Reviewed-by:
-
Eric Holk authored
Array buffers can now have an allocation that is larger than the actual buffer, such as when WebAssembly guard regions are enabled. Embedders need to know the actual allocation start and length when externalizing a buffer so they can deallocate it properly. Bug: chromium:720302, v8:5277 Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng Change-Id: Ifc184fdd59d77af01c07a64d2c0229ca859a01b0 Reviewed-on: https://chromium-review.googlesource.com/523271 Commit-Queue: Eric Holk <eholk@chromium.org> Reviewed-by:
Jochen Eisinger <jochen@chromium.org> Cr-Commit-Position: refs/heads/master@{#45777}
-
- 07 Jun, 2017 16 commits
-
-
sander authored
Calling `read(filename, 'binary')` should return an ArrayBuffer like SpiderMonkey does. It is possible to call `readbuffer` instead, but that function is not available in the SpiderMonkey JS shell. BUG=v8:6464 R=bradnelson@chromium.org Review-Url: https://codereview.chromium.org/2922353002 Cr-Commit-Position: refs/heads/master@{#45776}
-
Igor Sheludko authored
Store the rest raw data fields as ints. Bug: v8:6470 Change-Id: I3d4ab56a722ed6c0b5cb30ecee2d94d7c8f07b40 Reviewed-on: https://chromium-review.googlesource.com/526638 Commit-Queue: Igor Sheludko <ishell@chromium.org> Reviewed-by:
-
Igor Sheludko authored
Store 'length' and 'formal_parameter_count' fields as raw ints. Also fixed a couple of issues on the way. TBR=verwaest@chromium.org Bug: v8:6470 Change-Id: I74ecd87cb0f041e61dab50d8bc29e3604dd1d09c Reviewed-on: https://chromium-review.googlesource.com/527156 Commit-Queue: Igor Sheludko <ishell@chromium.org> Reviewed-by:
-
Andreas Haas authored
This CL extracts the classes CompilationHelper, InstantiationHelper, and AsyncCompileJob from wasm-module.cc and puts them into module-compiler.{h|cc}. This is necessary to introduce a WasmCompilationManager which is known to the isolate and manages the lifetime of all AsyncCompileJobs. In addition to the mechanical changes of copying the code and splitting class declaration from instantiation, I did the following changes: * I renamed the CompilationHelper to ModuleCompiler. * A finalizer function is passed to the InstantiationHelper as a parameter. * Adjusted UpdateDispatchTable in wasm-module.cc to make it available in wasm-module.h, also with the internal signature. * Duplicate the ResolvePromise/RejectPromise helper functions. I did not rename InstantiationHelper because I could not come up with a good name, and it could benefit from a small special refactoring anyways. BUG=v8:6436 R=clemensh@chromium.org, mtrofin@chromium.org Change-Id: I4abe854c36dfc995b34c9d7b3e7ec0f4f0aa562e Reviewed-on: https://chromium-review.googlesource.com/525572 Commit-Queue: Andreas Haas <ahaas@chromium.org> Reviewed-by:Mircea Trofin <mtrofin@chromium.org> Cr-Commit-Position: refs/heads/master@{#45773}
-
Michael Starzinger authored
The two variants "turbofan" and "turbofan_opt" are not part of any of the default sets of variants that run-tests.py uses. The only way to trigger execution would be via the --variants flag directly, which our infrastructure is not doing. R=machenbach@chromium.org Change-Id: Ifa58cb4a83a3760ffba73e8b40b417a845f53506 Reviewed-on: https://chromium-review.googlesource.com/526637Reviewed-by:
-
danno authored
Review-Url: https://codereview.chromium.org/2926123002 Cr-Commit-Position: refs/heads/master@{#45771}
-
jarin authored
BUG=chromium:729369 Review-Url: https://codereview.chromium.org/2926063002 Cr-Commit-Position: refs/heads/master@{#45770}
-
Sathya Gunasekaran authored
Bug: v8:5717 Change-Id: Idf29fd079c0cdd6c2498b2ea5bfb54e0c0d52c56 Reviewed-on: https://chromium-review.googlesource.com/526433 Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org> Reviewed-by:
Camillo Bruni <cbruni@chromium.org> Reviewed-by:
-
jgruber authored
Use the new ToString_Inline function instead, which performs a quick IsString check and calls the ToString builtin to handled conversion. This reduces builtins code size by 3K. BUG=v8:5737 Change-Id: I103e628b905aed9d74dd7b4c4a98c5b0a16fd476 Reviewed-on: https://chromium-review.googlesource.com/527133Reviewed-by:
-
Camillo Bruni authored
Bug: chromium:727000 Change-Id: I0fb6fecc9564aee97bcf7c0e9201c580572061be Reviewed-on: https://chromium-review.googlesource.com/525717 Commit-Queue: Camillo Bruni <cbruni@chromium.org> Reviewed-by:
Toon Verwaest <verwaest@chromium.org> Cr-Commit-Position: refs/heads/master@{#45767}
-
Michael Achenbach authored
Bug: v8:6408 Change-Id: I10a191561fbb1f0312b1c4270b21c393e8efe51c Reviewed-on: https://chromium-review.googlesource.com/527075Reviewed-by:
-
Alexey Kozyatinskiy authored
BytecodeArrayBreakIterator doesn't iterate through locations in position() order. SkipToPosition is looking for closest break_index to passed one. So we should iterate through all breakable locations in function to get all of them. R=jgruber@chromium.org Bug: v8:6469 Change-Id: Ida0b849e9df40458a13e0a0f7af6a00349088228 Reviewed-on: https://chromium-review.googlesource.com/527135Reviewed-by:
-
danno authored
This CL contains a few pieces: - A new mechanism to create "BuiltinContinuation" checkpoints in TurboFan graphs, which--when triggered--swizzle the values in the the FrameState to be parameters to a typically TF-generated builtin that resumes execution to finish the slow-case functionality. - Continuation builtins that have special handling in the deoptimizer and their own new frame type to ensure that the values they need to begin executing can be stashed away and restored immediately before the builtin is called via a trampoline that runs when the continuation builtin's frame execution resumes. - An implementation of Array.prototype.forEach in TurboFan that can be used to inline it. The inlined forEach implementation uses the checkpoints mechanism described above to deopt in the middle of the forEach in the cases that optimization invariants are violated. There is a slightly different continuation stub for each deopt point in the forEach implementation to ensure the correct side-effects, i.e. that the deopt of the builtin isn't programmatically observable. Review-Url: https://codereview.chromium.org/2803853005 Cr-Commit-Position: refs/heads/master@{#45764}
-
hpayer authored
BUG=chromium:729521 CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_rel_ng Review-Url: https://codereview.chromium.org/2923563006 Cr-Commit-Position: refs/heads/master@{#45763}
-
Michael Starzinger authored
R=jkummerow@chromium.org Change-Id: I8e972d27c3f106b7838b4341a053b07f516d7c1e Reviewed-on: https://chromium-review.googlesource.com/527035Reviewed-by:
-
Ulan Degenbaev authored
This patch also changes String body descriptor to use synchronized length and adds atomic live_bytes accessor. BUG=chromium:694255 Change-Id: I41233b2097ec5c6a4ea2c45d4b8febf7ffca155e Reviewed-on: https://chromium-review.googlesource.com/527093Reviewed-by:
-
