This reverts commit 6193ff68.

This change is unneeded.

* qatar/master:
  SBR DSP: fix SSE code to not use SSE2 instructions.
  cpu: initialize mask to -1, so that by default, optimizations are used.
  error_resilience: initialize s->block_index[].
  svq3: protect against negative quantizers.
  Don't use ff_cropTbl[] for IDCT.
  swscale: make filterPos 32bit.
  FATE: add CPUFLAGS variable, mapping to -cpuflags avconv option.
  avconv: add -cpuflags option for setting supported cpuflags.
  cpu: add av_set_cpu_flags_mask().
  libx264: Allow overriding the sliced threads option
  avconv: fix counting encoded video size.

Conflicts:
	doc/APIchanges
	doc/fate.texi
	doc/ffmpeg.texi
	ffmpeg.c
	libavcodec/h264idct_template.c
	libavcodec/svq3.c
	libavutil/avutil.h
	libavutil/cpu.c
	libavutil/cpu.h
	libswscale/swscale.c
	tests/Makefile
	tests/fate-run.sh
	tests/regression-funcs.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

h264 Fix: "warning: assigning to 'uint8_t *' (aka 'unsigned char *') from 'const uint8_t *' (aka 'const unsigned char *') discards qualifiers"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

movq from SSE register _to_ memory is an SSE2 instruction.
Use the SSE movlps function instead that does the same thing.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

This fixes an issue in the code to check the size that will
be written to match the actual code writing. In the long
term it would make sense to change this so the counting and
writing code are the same so they dont need to be kept in sync.

It also increases the array size, which was too small either way
and adds a redudnant saftey check.

This issue does not affect any FFmpeg release as it has been
introduced Jan 31 which is narrowly after our last release.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fixes ticket #962.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Results of IDCT can by far outreach the range of ff_cropTbl[], leading
to overreads and potentially crashes.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Fixes overflows for large image sizes.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

This fixes some arith decoder overreads and a potential infinite loop.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Useful for testing.

Signed-off-by: Martin Storsjö <martin@martin.st>

avcodec_encode_video2() return value is 0 on success, encoded frame size
is stored in the packet.

* qatar/master: (31 commits)
  cdxl demux: do not create packets with uninitialized data at EOF.
  Replace computations of remaining bits with calls to get_bits_left().
  amrnb/amrwb: Remove get_bits usage.
  cosmetics: reindent
  avformat: do not require a pixel/sample format if there is no decoder
  avformat: do not fill-in audio packet duration in compute_pkt_fields()
  lavf: Use av_get_audio_frame_duration() in get_audio_frame_size()
  dca_parser: parse the sample rate and frame durations
  libspeexdec: do not set AVCodecContext.frame_size
  libopencore-amr: do not set AVCodecContext.frame_size
  alsdec: do not set AVCodecContext.frame_size
  siff: do not set AVCodecContext.frame_size
  amr demuxer: do not set AVCodecContext.frame_size.
  aiffdec: do not set AVCodecContext.frame_size
  mov: do not set AVCodecContext.frame_size
  ape: do not set AVCodecContext.frame_size.
  rdt: remove workaround for infinite loop with aac
  avformat: do not require frame_size in avformat_find_stream_info() for CELT
  avformat: do not require frame_size in avformat_find_stream_info() for MP1/2/3
  avformat: do not require frame_size in avformat_find_stream_info() for AAC
  ...

Conflicts:
	doc/APIchanges
	libavcodec/Makefile
	libavcodec/avcodec.h
	libavcodec/h264.c
	libavcodec/h264_ps.c
	libavcodec/utils.c
	libavcodec/version.h
	libavcodec/x86/dsputil_mmx.c
	libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>

All colorspaces are supported.

Renamed libutvideo.cpp to libutvideodec.cpp.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

This is so the forthcoming encoder wrapper can share
them.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

It is used to parse fixed sized fields out of a single octet. The code
is simpler without it.

AV_LOG_DEBUG is forced by the av_dlog definition.

Also, do not keep trying to find and open a decoder in try_decode_frame() if
we already tried and failed once.

Fixes always searching until max_analyze_duration in
avformat_find_stream_info() when demuxing codecs without a decoder.

Use the estimated duration only to calculate missing timestamps if needed.

Also, do not give AVCodecContext.frame_size priority for muxing.

Updated 2 FATE references:
dxa-feeble - adds 1 audio frame that is still within 2 seconds as specified
             by -t 2 in the FATE test
wmv8-drm-nodec - durations are not needed. previously they were estimated
                 using the packet size and average bit rate.

It is not necessary

It is not necessary

It is not necessary

also, properly set AVCodecContext.bits_per_coded_sample, AVStreasm.start_time,
and AVPacket.duration.