This should be reused for a generic simple_idct10 function.
Requires a bit of trickery to declare common constants in C.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

To keep it similar to the other functions which are all named *_pred.

Left out of last commit which added support for eight channel audio.

Dequant or encoding were trying to reverse a scan that hadn't been
applied...
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>

Includes escapes that should now be supported and a few features not yet
fully supported, like comments, regions, classes, ruby, and lang.

All were tested with https://quuz.org/webvtt/ for validation, except
regions because the validator doesn't support them yet, and I couldn't
find any other way to validate WebVTT.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>

Bare ampersand characters are still accepted, even though out-of-spec.
Also fixes adjacent tags not being parsed.

Fixes trac #4915
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>

Signed-off-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

Fails on SunOS and old GCC (<=4.6 is ancient) versions.

This commit adds the ability for a profile to set the default
options, as well as for the user to override such options
by simply stating them in the command line while still keeping
the same profile, as long as those options are still permitted by
the profile.

Example: setting the profile to aac_low (the default) will turn
PNS and IS on. They can be disabled by -aac_pns 0 and -aac_is 0,
respectively. Turning on -aac_pred 1 will cause the profile to be
elevated to aac_main, as long as no options forbidding aac_main
have been entered (like AAC-LTP, which will be pushed soon).

A useful feature is that by setting the profile to mpeg2_aac_low,
all MPEG4 features will be disabled and if the user tries to enable
them then the program will exit with an error. This profile is
signalled with the same bitstream as aac_low (MPEG4) but some devices
and decoders will fail if any MPEG4 features have been enabled.

Signed-off-by: Alex Agranovsky <alex@sighthound.com>

It makes possible to put multiple stream specifier into the select
option separated by comma.
eg. select=\'a:0,v\'
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Nicolas George <george@nsup.org>

This commit implements support for 7.1 channel audio. There's no
more predefined bitstream channel mappings so going beyond 8 channels
(and 7 channels exactly) will require programmable channel elements,
which is already underway.

Two guesses as to which file was used as boilerplate.

The bulk of calls to quantize_band_cost are replaced
by a call to a version that memoizes, greatly improving
performance, since during coefficient search there is
a great deal of repeat work.

Memoization cannot always be applied, so do this in a
different function, and leave the original as-is.

The 2nd size value is wrong for the sample file

Fixes: Ticket4903
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Intermediate results can indeed violate SF delta. Instead of asserting
there, just make the code safe, and assert on the final result.

Also re-clamp SFs more often in short windows (which tend to violate
the restriction when encoding the switch from one window to the other)

Seems it was forgotten.

Found-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

It was merged with the iff_ilbm decoder in commit
929a24ef.

Define AV_CODEC_ID_IFF_BYTERUN1 as AV_CODEC_ID_IFF_ILBM for API
compatibility.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

No change in fuctionality.
Signed-off-by: Marton Balint <cus@passwd.hu>

To avoid race conditions.
Signed-off-by: Marton Balint <cus@passwd.hu>

It's a non-installed header and only used in one place (flacenc).
Since ff_ctz is static inline, it's fine to use that instead.

MIPS needs more fuzz

Removes unnecessary isatty(), fixes Ticket2964
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Reindent

This finalizes merging of the work in the patches in ticket #2686.

Improvements to twoloop and RC logic are extensive.

The non-exhaustive list of twoloop improvments includes:
 - Tweaks to distortion limits on the RD optimization phase of twoloop
 - Deeper search in twoloop
 - PNS information marking to let twoloop decide when to use it
   (turned out having the decision made separately wasn't working)
 - Tonal band detection and priorization
 - Better band energy conservation rules
 - Strict hole avoidance

For rate control:
 - Use psymodel's bit allocation to allow proper use of the bit
   reservoir. Don't work against the bit reservoir by moving lambda
   in the opposite direction when psymodel decides to allocate more/less
   bits to a frame.
 - Retry the encode if the effective rate lies outside a reasonable
   margin of psymodel's allocation or the selected ABR.
 - Log average lambda at the end. Useful info for everyone, but especially
   for tuning of the various encoder constants that relate to lambda
   feedback.

Psy:
 - Do not apply lowpass with a FIR filter, instead just let the coder
   zero bands above the cutoff. The FIR filter induces group delay,
   and while zeroing bands causes ripple, it's lost in the quantization
   noise.
 - Experimental VBR bit allocation code
 - Tweak automatic lowpass filter threshold to maximize audio bandwidth
   at all bitrates while still providing acceptable, stable quality.

I/S:
 - Phase decision fixes. Unrelated to #2686, but the bugs only surfaced
   when the merge was finalized. Measure I/S band energy accounting for
   phase, and prevent I/S and M/S from being applied both.

PNS:
 - Avoid marking short bands with PNS when they're part of a window
   group in which there's a large variation of energy from one window
   to the next. PNS can't preserve those and the effect is extremely
   noticeable.

M/S:
 - Implement BMLD protection similar to the specified in
   ISO-IEC/13818:7-2003, Appendix C Section 6.1. Since M/S decision
   doesn't conform to section 6.1, a different method had to be
   implemented, but should provide equivalent protection.
 - Move the decision logic closer to the method specified in
   ISO-IEC/13818:7-2003, Appendix C Section 6.1. Specifically,
   make sure M/S needs less bits than dual stereo.
 - Don't apply M/S in bands that are using I/S

Now, this of course needed adjustments in the compare targets and
fuzz factors of the AAC encoder's fate tests, but if wondering why
the targets go up (more distortion), consider the previous coder
was using too many bits on LF content (far more than required by
psy), and thus those signals will now be more distorted, not less.

The extra distortion isn't audible though, I carried extensive
ABX testing to make sure.

A very similar patch was also extensively tested by Kamendo2 in
the context of #2686.

This adds av_warn_unused_result whenever it is relevant.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Fixes Ticket4922.

Commit 06010238 broke configure, since
the inversion ! was missed while converting the grep to a case
statement.
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

It appears that Xbox ADPCM is same as WAV adpcm.
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Suggested-by: ubitux
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: CID1322305 and CID1322304
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>