Meant to reset the internal bsf state without the need to reinitialize it.
Signed-off-by: James Almer <jamrial@gmail.com>

This was a typo in 0671eb23, spotted by Chris Carroux.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This makes sure to pick up the actual error codes on windows.
Signed-off-by: Martin Storsjö <martin@martin.st>

Previously, AVERROR(EIO) was returned on failure of
http_open_cnx_internal(). Now the value is passed to upper level, thus
it is possible to distinguish ECONNREFUSED, ETIMEDOUT, ENETUNREACH etc.
Signed-off-by: Martin Storsjö <martin@martin.st>

we need to make sure that memory allocation for Y/UV planes is continuous and re-used from a
pool
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

The current git master version of libopenh264 supports decoding of
b-frames.
Signed-off-by: Martin Storsjö <martin@martin.st>

Some callers (like do_subtitle_out(), or do_streamcopy()) call this
with an AVPacket that is not refcounted. This can cause undefined
behavior.

Calling av_packet_move_ref() does not make a packet refcounted if it
isn't yet. (And it can't be made to, because it always succeeds,
and can't return ENOMEM.)

Call av_packet_ref() instead to make sure it's refcounted.

Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Current implementations of qsv components incorrectly work with async level, they
actually try to work in async+1 level stepping into MFX_WRN_DEVICE_BUSY and polling
loop. This change address this misbehaviour.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Maxym Dmytrychenko <maxim.d33@gmail.com>
Cc: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

The passphrase field is a pointer already.

Bug-Id: https://github.com/Haivision/srt/issues/416

Signed-off-by: Martin Storsjö <martin@martin.st>

Commit 8c893aa3 removed quotes that were required to detect
inline asm:

check_insn armv5te qadd r0, r0, r0
.../test.c:1:34: error: expected string literal in 'asm'
void foo(void){ __asm__ volatile(qadd r0, r0, r0); }

The correct code is:

void foo(void){ __asm__ volatile("qadd r0, r0, r0"); }

Commit message written by Frank Liberato <liberato@chromium.org>
Signed-off-by: Martin Storsjö <martin@martin.st>

1. vcm mode is only available for H264.
2. vcm is not supported on Linux, but it is shown when run "./avconv -h
encoder=h264_qsv |grep vcm". This shouldn't happen.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

Use a common way to control target_usage, keeping consistent with vaapi
encoders. The private option preset is kept only for compatibility.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

Signed-off-by: Sven Dueking <sven.dueking@nablet.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Signed-off-by: Sven Dueking <sven.dueking@nablet.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Provide proper aliases to enable/disable MFE.

The numeric values are ambiguous and misleading (e.g: user may misunderstand
setting mfmode to 1 is to enable MFE but actually it is to disable MFE, and
set it to be 5 or above is meaningless).

MFX_MF_MANUAL hasn't been exposed since it is to be implemented.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

/usr/include/mbedtls/net.h:29:2: warning: #warning "Deprecated header file: Superseded by mbedtls/net_sockets.h" [-Wcpp]

This renaming was overlooked in the previous check_header() rename.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

The plural in the name clarifies the fact that the function
can check for multiple headers at once.

Their API and implementation is different from other require_foo() functions,
which violates the rule of least astonishment.

This fixes frame corruption issue when decoder started reusing frames
while they are still in use of encoding process

Issue with frame corruption  was reproduced using:

    avconv.exe -y -hwaccel d3d11va -hwaccel_output_format d3d11 -i input.h264 -an -c:v h264_amf output.mkv

It is recommended to use -extra_hw_frames 16 option in case if hw frames
number in pool is not enough
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Remove the wincrypt API calls since we don't support XP anymore and
bcrypt is available since Vista, even on Windows Store builds.
Signed-off-by: Martin Storsjö <martin@martin.st>

This fixes building with clang in msvc mode, which does support
gcc style inline assembly.

This removes the XP compatibility code, and switches entirely to SRW
locks, which are available starting at Windows Vista.

This removes CRITICAL_SECTION use, which allows us to add
PTHREAD_MUTEX_INITIALIZER, which will be useful later.

Windows XP is hereby not a supported build target anymore.
Signed-off-by: Diego Biurrun <diego@biurrun.de>

Shift fixed point numbers to be actual decimal numbers.

Where tiny is less than the default CTU size.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Set the flag MFX_BITSTREAM_COMPLETE_FRAME when it is a progressive picture.
This can fix vc1 decoding segment fault issues because can't set the start
code correctly.

See: ./avconv -hwaccel qsv -c:v vc1_qsv -i /fate-suite/vc1/SA00040.vc1
-vf "hwdownload, format=nv12" -f rawvideo /dev/null

v2: fix some h264 interlaced clips regression
a. field_order of some h264 interlaced video (e.g: cama3_vtc_b.avc) is marked as AV_FIELD_UNKNOWN
   in h264_parser.c. This is not a completed frames.
   So only set the MFX_BITSTREAM_COMPLETE_FRAME when it is progressive.
b. some clips have both progressive and interlaced frames (e.g.CAPAMA3_Sand_F.264),
   the parsed field_order maybe changed druing the decoding progress.

This patch has been verified for other codecs(mpeg2/hevc/vp8).
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

Starting from API 1.25 helps to improve performance of the simultaneous
encode, 1:N scenario, like:

./avconv  -y -hwaccel qsv -c:v h264_qsv -r 30000/1001 -i
~/bbb_sunflower_1080p_60fps_normal.mp4  -vframes 600 -an \
    -filter_complex "split=2[s1][s2]; [s1]scale_qsv=1280:720[o1];
[s2]scale_qsv=960:540[o2]" \
    -map [o1] -c:v h264_qsv -b:v 3200k -minrate 3200k -maxrate 3200k -f
rawvideo /tmp/3200a.264 \
    -map [o2] -c:v h264_qsv -b:v 1750k -minrate 1750k -maxrate 1750k -f
rawvideo /tmp/1750a.264
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

Currently vpp pipeline is always created, even for the unnecessary
cases such as setting the option "vpp_qsv=w=1280:h=720" for an input
with native resolution 1280x720. Thus introduces unnecessary performance
dropping, so bypass vpp if not needed.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

Currently pict_type and key_frame are unset.
Add an extra param to fetch the picture type from qsv decoder

The judgement “key frame is equal to IDR frame” only suitable for H264.
For HEVC, all IRAP frames are key frames, and other codecs have no IDR
frame.
Signed-off-by: ChaoX A Liu <chaox.a.liu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>

Support for it was apparently never in the codebase, and the enum
values were recently removed from the public headers [1]

Fixes build with latest libaom build.

[1] https://aomedia.googlesource.com/aom/+/3f29cc20e3a4c348cb41a797c68de856ddb84e12Signed-off-by: James Almer <jamrial@gmail.com>

Support for it was apparently never in the codebase, and the enum
values were recently removed from the public headers [1]

Fixes build with latest libaom build.

[1] https://aomedia.googlesource.com/aom/+/2e3cd5c5c30fa02134681cda900c32486807af3fSigned-off-by: James Almer <jamrial@gmail.com>