This function doesn't call emms.
Signed-off-by: Martin Storsjö <martin@martin.st>

Call it directly from write_packets_common() instead of indirectly
through prepare_input_packet().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

This commit stops using pkt->stream_index as index in an AVFormatContext's
streams array before actually comparing the value with the count of
streams in said array. 96e5e6ab used
pkt->stream_index in prepare_input_packet() before checking and
64063512 did likewise in
write_packets_common().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

This allows speeding up format conversions from yuv420 to nv12.

                             Cortex A53      A72      A73
interleave_bytes_c:             86077.5  51433.0  66972.0
interleave_bytes_neon:          19701.7  23019.2  15859.2
interleave_bytes_aligned_c:     86603.0  52017.2  67484.2
interleave_bytes_aligned_neon:   9061.0   7623.0   6309.0
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

                        Cortex A53    A72    A73
get_pixels_c:                140.7   87.7   72.5
get_pixels_neon:              46.0   20.0   19.5
get_pixels_unaligned_c:      140.7   87.7   73.0
get_pixels_unaligned_neon:    49.2   20.2   26.2
diff_pixels_c:               209.7  133.7  138.7
diff_pixels_neon:             54.2   31.7   23.5
diff_pixels_unaligned_c:     209.7  134.2  139.0
diff_pixels_unaligned_neon:   68.0   27.7   41.7
Signed-off-by: Martin Storsjö <martin@martin.st>

                         Cortex A7     A8     A9    A53   A72
get_pixels_c:                144.7  146.0  143.0  137.7   69.0
get_pixels_armv6:            112.0  106.7   90.2   95.0   72.5
get_pixels_neon:              69.0   29.7   68.7   40.2   19.0
get_pixels_unaligned_c:      144.7  146.2  143.0  137.7   69.0
get_pixels_unaligned_neon:    77.0   36.5   72.5   48.5   19.0
diff_pixels_c:               376.7  319.7  265.5  307.7  148.0
diff_pixels_armv6:           179.0  159.5  205.5  139.0  142.0
diff_pixels_neon:             69.0   40.2   77.5   53.2   26.0
diff_pixels_unaligned_c:     376.7  319.7  265.5  307.7  148.0
diff_pixels_unaligned_neon:   85.0   54.5   93.5   66.7   26.0
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

The NEON hscale function only supports X8 filter sizes and should only
be selected when these are being used. At the moment filterAlign is
set to 8 but in the future when extra NEON assembly for specific sizes is
added they will need to have checks here too.

The immediate usecase for this change is making the hscale checkasm
test easier and without NEON specific edge-cases (x86 already has these
guards).

This applies the same fix from 718c8f9a
on the 32 bit arm version of the function, fixing fate-checkasm-sw_scale
there.
Signed-off-by: Martin Storsjö <martin@martin.st>

If you have a file with multiple Metadata Keys, the second time you parse
the keys, you will re-alloc c->meta_keys without freeing the old one.
This change will avoid parsing all the consecutive Metadata keys.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Many places are using their own custom code for handling overflow
around timestamps or other int64_t values. There are enough of these
now that having some common saturated math functions seems sound.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Also fill x8-x17 with garbage before calling the function.

Figure out the number of stack parameters and make sure that the
value on the stack after those is untouched.
Signed-off-by: Martin Storsjö <martin@martin.st>

Figure out the number of stack parameters and make sure that the
value on the stack after those is untouched.
Signed-off-by: Martin Storsjö <martin@martin.st>

We should just use a normal bl here, and the linker will add the 'x'
bit if necessary.

This fixes calling the checkasm_fail_func on windows, where the
code is built in thumb mode (and the linker doesn't clear the 'x'
bit in the blx instruction).
Signed-off-by: Martin Storsjö <martin@martin.st>

This makes it easier to share code with e.g. the dav1d implementation
of checkasm.
Signed-off-by: Martin Storsjö <martin@martin.st>

On windows and darwin (and modern android), the x18 register is reserved
and shouldn't be modified by user code, while it is freely available on
linux. Strictly avoid it, to keep the assembly code portable.

This would have helped catch the issue fixed in 872790b1
immediately.
Signed-off-by: Martin Storsjö <martin@martin.st>

This reverts commit 339593ca.

Fixes null pointer dereference.
Signed-off-by: Marton Balint <cus@passwd.hu>

This reverts commit d88e1c98.

Fixes null pointer dereference.
Signed-off-by: Marton Balint <cus@passwd.hu>

This tests the hscale 8bpp to 14/18bpp functions with different filter
sizes.
Signed-off-by: Josh de Kock <josh@itanimul.li>

This was ported from dav1d (c950e7101bdf5f7117bfca816984a21e550509f0).
Signed-off-by: Josh de Kock <josh@itanimul.li>

The NEON hscale function only supports X8 filter sizes and should only
be selected when these are being used. At the moment filterAlign is
set to 8 but in the future when extra NEON assembly for specific sizes is
added they will need to have checks here too.

The immediate usecase for this change is making the hscale checkasm
test easier and without NEON specific edge-cases (x86 already has these
guards).
Signed-off-by: Josh de Kock <josh@itanimul.li>

The h264_nvenc and hevc_nvenc encoders aren't respecting the framerate in the codec context.
Instead it was using the timebase which in our use-case was 1/1000 so the encoder was behaving
as if we wanted 1000fps. This resulted in poor encoding results due to an extremely low bitrate.

Both the amf and qsv encoders already contain similar logic to first check the framerate before
falling back to the timebase.
Signed-off-by: Zachariah Brown <zachariah@renewedvision.com>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>

It's not meant for audio or subtitles, or for encoders of any kind.
Reviewed-by: mypopy@gmail.com <mypopy@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

have tested on linux x86_32/64, mingw32/64 arm & mips qemu
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

 ./ffmpeg -loglevel debug -i ../fate-suite/svq3/Vertical400kbit.sorenson3.mov -vf
 minterpolate=fps=60:mi_mode=blend -an -f null -
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 1600
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 4120
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 5780
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 6700
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 8140
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 9740
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 14060
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 15680
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 18480
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 20020
 [Parsed_minterpolate_0 @ 0x7fe7f3e193c0] scene changed, input pts 21740

 The results are consistent with tests/ref/fate/filter-metadata-scenedetect

 For the master, it'll detect more than 20 scene change for the same source.
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

ts->{tsid,onid} stores the values of ts->{transport_stream_id,original_network_id}
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>

A temporary heap array currently stores pids from all streams.  It is
used to make sure there are no duplicated pids. However, this array is
not needed because the pids from past streams are stored in the
MpegTSWriteStream structs.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>

Tested on x86-32/64, mingw32/64, arm & mips qemu
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Until now, we would have only attempted to utilize already decrypted
data if it was enough to fill the size of buffer requested, that could
very well be up to 32 kilobytes.

With keep-alive connections this would just lead to recv blocking
until rw_timeout had been reached, as the connection would not be
officially closed after each transfer. This would also lead to a
loop, as such timed out I/O request would just be attempted again.

By just returning the available decrypted data, keep-alive based
connectivity such as HLS playback is fixed with schannel.

The dec_buf seems to be properly managed between read calls,
and we have no logic to decrypt before attempting socket I/O.
Thus - until now - such data would not be decrypted in case of
connections such as HTTP keep-alive, as the recv call would
always get executed first, block until rw_timeout, and then get
retried by retry_transfer_wrapper.

Thus - if data is received - decrypt all of it right away. This way
it is available for the following requests in case they can be
satisfied with it.