After this claim was made in e34e3619 kamedo2 did an in-depth ABX
test comparing these encoders:

https://hydrogenaud.io/index.php?topic=111085.0

Result: FFmpeg AAC wasn't as good as libfdk_aac on average.

I know some things have changed since then such as, "use the fast
coder as the default" (fcb681ac) for example, so maybe the situation
is different now.

However, I am unaware of any recent comparison. So without any
substantiation we shouldn't make such a blantant claim.
Signed-off-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>

Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Up until now the documentation of ff_bsf_get_packet_ref() allowed return
values >= 0 in case of success, whereas av_bsf_receive_packet() only
allows 0 on success. Given that for some bitstream filters the return
value of ff_bsf_get_packet_ref() is forwarded to the caller of
av_bsf_receive_packet() without any filtering, there would be a problem
if ff_bsf_get_packet_ref() actually returned values > 0. But it
currently doesn't and there is no reason why it should ever do so.
Therefore this commit aligns the return values of these functions by
restricting ff_bsf_get_packet_ref() to always returns 0 on success.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Mainly includes reindentation and returning directly (i.e. without
a goto fail when possible).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

The check will be true at most once anyway.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Before this commit, the checks were unnecessarily scattered.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

hls_init() would at first allocate the vtt_basename string, then
allocate the vtt_m3u8_name string followed by several operations that
may fail and then open the subtitles' output context. Yet upon freeing,
these strings were only freed when the subtitles' output context
existed, ensuring that they leak if something goes wrong between their
allocation and the opening of the subtitles' output context. So drop the
check for whether this output context exists.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

This fixes memleaks in instances such as:
a) When an allocation fails at one of the two places in hls_init() where
the error is returned immediately without goto fail first.
b) When an error happens when writing the header.
c) When an allocation fails at one of the three places in
hls_write_trailer() where the error is returned immediately without goto
fail first.
d) When one decides not to write the trailer at all (e.g. because of
errors when writing packets).
Furthermore, it removes code duplication and allows to return
immediately, without goto fail first.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Several variables which are only used when the HLS_SINGLE_FILE flag is
unset have been set even when this flag is set. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

The Matroska specification allows multiple (level 1) Tags elements per
file, yet our demuxer didn't: While it parsed any amount of Tags
elements it found in front of the Clusters (albeit with warnings because
of duplicate elements), it would treat any Tags element only referenced
via a SeekHead entry as already parsed if any Tags element has already
been parsed; therefore this Tags element would not be parsed at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

There can be more than one SeekHead in a Matroska file, but most of the
other level 1 elements can only occur once.* Therefore the Matroska
demuxer only allows one entry per ID in its internal list of level 1
elements known to it; the only exception to this are SeekHeads.

The only exception to this are SeekHeads: When one is encountered
(either directly or in the list of entries read from SeekHeads),
a new entry in the list of known level-1 elements is always added,
even when this entry is actually already known.

This leads to lots of seeks in case of circular SeekHeads: Each time a
SeekHead is parsed, a new entry for a SeekHead will be added to the list
of entries read from SeekHeads. The exception for SeekHeads mentioned
above now implies that this SeekHead will always appear new and unparsed
and parsing will be attempted. This continued until the list of known
level-1 elements is full.

Fixing this is pretty simple: Don't add a new entry for a SeekHead if
its position matches the position of an already known SeekHead.

*: Actually, there can be multiple Tags and several other level 1
elements are "identically recurring" which means they may be resent
multiple times, but each instance must be absolutely identical to the
previous.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

A Seek element in a Matroska SeekHead should contain a SeekID and a
SeekPosition element and upon reading, they should be sanitized:

Given that IDs are restricted to 32 bit, longer SeekIDs should be treated
as invalid. Instead currently the lower 32 bits have been used.

For SeekPosition, no checks were performed for the element to be
present and if present, whether it was excessively large (i.e. the
absolute file position described by it exceeding INT64_MAX). The
SeekPosition element had a default value of -1 which means that a check
seems to have been intended; but it was not implemented. This commit adds
a check for overflow to the calculation of the absolute file position of
the referenced level 1 elements.
Using -1 (i.e. UINT64_MAX) as default value for SeekPosition implies that
a Seek element without SeekPosition will run afoul of this check.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

mails to GMX seem working again

This reverts commit cd11fbcf.

Signed-off-by: Guo, Yejun <yejun.guo@intel.com>

it can be tested with model file generated with below python script:
import tensorflow as tf
import numpy as np
import imageio

in_img = imageio.imread('input.jpg')
in_img = in_img.astype(np.float32)/255.0
in_data = in_img[np.newaxis, :]

x = tf.placeholder(tf.float32, shape=[1, None, None, 3], name='dnn_in')
x1 = tf.minimum(0.7, x)
x2 = tf.maximum(x1, 0.4)
y = tf.identity(x2, name='dnn_out')

sess=tf.Session()
sess.run(tf.global_variables_initializer())

graph_def = tf.graph_util.convert_variables_to_constants(sess, sess.graph_def, ['dnn_out'])
tf.train.write_graph(graph_def, '.', 'image_process.pb', as_text=False)

print("image_process.pb generated, please use \
path_to_ffmpeg/tools/python/convert.py to generate image_process.model\n")

output = sess.run(y, feed_dict={x: in_data})
imageio.imsave("out.jpg", np.squeeze(output))
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>

Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

x264_encoder_encode can return 0 with nnal 0. As a result, encode_nals will
return 0. In this condition, it's better to return 0 immediately to avoid
the following unneeded pict_type and flags setting.
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

return error if unknown picture type encountered

Fixes CID 1457234
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Generic retime functionality is replaced by a few lines of code directly in the
muxers which used it, which seems a lot easier to understand and this way the
retiming is not dependant of the input durations.

Also remove retimeinterleave, since it is not used by anything anymore.
Signed-off-by: Marton Balint <cus@passwd.hu>

And rename it to retimeinterleave, use the pcm_rechunk bitstream filter for
rechunking.

By seperating the two functions we hopefully get cleaner code.
Signed-off-by: Marton Balint <cus@passwd.hu>

Signed-off-by: Marton Balint <cus@passwd.hu>

Previously only 1:1 bitstream filters were supported, the end of the stream was
not signalled to the bitstream filters and time base changes were ignored.

This change also allows muxers to set up bitstream filters regardless of the
autobsf flag during write_header instead of during check_bitstream and those
bitstream filters will always be executed.
Signed-off-by: Marton Balint <cus@passwd.hu>

In preparation for N:M bsf support.
Signed-off-by: Marton Balint <cus@passwd.hu>

Signed-off-by: Marton Balint <cus@passwd.hu>

Will be needed later to avoid a forward declaration.
Signed-off-by: Marton Balint <cus@passwd.hu>

avformat_alloc_output_context2() already sets the oformat member, so
that there is no reason to overwrite it again with the value it already
has.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

because the offset should use one byte
Reviewed-by: Zhao Jun <barryjzhao@tencent.com>
Reported-by: Zhao Jun <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>

The patch will make audio and subtitle packets be marked as AV_PKT_FLAG_KEY.

For audio, it'll caused the audio sample to be sync sample.
To verify ref/fate/movenc results:
1. Get the movenc test data
[lmwang@vpn ffmpeg]$ libavformat/tests/movenc -w && mkdir -p audio_old && mv *.mp4 audio_old_

After applied the patch:
[lmwang@vpn ffmpeg]$ make fate-movenc SAMPLES=../fate-suite
[lmwang@vpn ffmpeg]$ libavformat/tests/movenc -w && mkdir -p audio_key && mv *.mp4 audio_key

2. Get l-smash and build boxdumper
https://github.com/l-smash/l-smash.git

3. dump the box of crc change mp4 and diff -u
[lmwang@vpn ffmpeg]$ ../l-smash/cli/boxdumper --box audio_key/non-empty-moov-no-elst.mp4  > audio_key/non-empty-moov-no-elst.log
[lmwang@vpn ffmpeg]$ ../l-smash/cli/boxdumper --box audio_old/non-empty-moov-no-elst.mp4  > audio_old/non-empty-moov-no-elst.log
[lmwang@vpn ffmpeg]$ diff -u audio_key/non-empty-moov-no-elst.log audio_old/non-empty-moov-no-elst.log
-                default_sample_flags = 0x02000000
-                    independent
-                    sync sample
+                default_sample_flags = 0x01010000
+                    dependent
+                    non-sync sample

4. have checked the change of crc are caused by default_sample_flags
non-empty-moov.mp4, non-empty-moov-elst.mp4,
non-empty-moov-no-elst.mp4, empty-moov.mp4, delay-moov-content.mp4,
empty-moov-second-frag.mp4, empty-moov-second-frag-discont.mp4,
delay-moov-second-frag-discont.mp4, delay-moov-elst-second-frag.mp4
etc

5 For subtitle, it'll effect for tests/ref/fate/binsub-movtextenc and
tests/ref/fate/sub2video, that's expecting result for the subtitle is
marked as keyframe. Below is the checking result of binsub-movtextenc:

[lmwang@vpn ffmpeg]$ ./ffmpeg -i ../fate-suite/sub/MovText_capability_tester.mp4 -map 0 -scodec mov_text -f mp4 -flags +bitexact -fflags +bitexact -movflags frag_keyframe+empty_moov audio_key/binsub-movtextenc.mp4
[lmwang@vpn ffmpeg]$ ./ffmpeg -i ../fate-suite/sub/MovText_capability_tester.mp4 -map 0 -scodec mov_text -f mp4 -flags +bitexact -fflags +bitexact -movflags frag_keyframe+empty_moov audio_old/binsub-movtextenc.mp4
[lmwang@vpn ffmpeg]$../l-smash/cli/boxdumper audio_key/binsub-movtextenc.mp4  > audio_key/binsub-movtextenc.log
[lmwang@vpn ffmpeg]$../l-smash/cli/boxdumper audio_old/binsub-movtextenc.mp4  > audio_old/binsub-movtextenc.log
[lmwang@vpn ffmpeg]$ diff -u audio_key/binsub-movtextenc.log audio_old/binsub-movtextenc.log
.... // the key difference is the flag for sync sample
-                flags = 0x000701
+                flags = 0x000301
                     data-offset-present
                     sample-duration-present
                     sample-size-present
-                    sample-flags-present
                 sample_count = 6
-                data_offset = 188
+                data_offset = 164
                 sample[0]
                     sample_duration = 1570000
                     sample_size = 21
-                    sample_flags = 0x02000000
-                        independent
-                        sync sample
-                        degradation_priority = 0
                 sample[1]
                     sample_duration = 510000
                     sample_size = 2
-                    sample_flags = 0x01010000
-                        dependent
-                        non-sync sample
-                        degradation_priority = 0
                 sample[2]
                     sample_duration = 1690000
                     sample_size = 9
-                    sample_flags = 0x02000000
-                        independent
-                        sync sample
-                        degradation_priority = 0
Suggested-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Suggested-by: Nicolas George <george@nsup.org>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>