Remove endianess hack.

"LinearRaw" is a value that the PhotometricInterpretation tag can be set
to on DNG images that contain color information for all channels instead
of being bayer-encoded ("CFA" value).

The DNG decoder is complete enough that we can enable this now.

Sample:
- http://www.rawsamples.ch/raws/nikon/SCANNER_NIKON_LS5000.DNGSigned-off-by: Nick Renieris <velocityra@gmail.com>

Initialized to `(2 ^ BitsPerSample) - 1` as per the DNG Specification.

Also make sure that `BlackLevel < WhiteLevel`.

This fixes decoding for "X7 CinemaDNG" samples here:
- https://www.dji.com/gr/zenmuse-x7/info#downloadsSigned-off-by: Nick Renieris <velocityra@gmail.com>

DNG samples here can now be decoded:
- https://www.photographyblog.com/previews/pentax_k1_photosSigned-off-by: Nick Renieris <velocityra@gmail.com>

Samples:
- Embedded JPEG images in the DNG images here:
  https://www.photographyblog.com/previews/pentax_k1_photosSigned-off-by: Nick Renieris <velocityra@gmail.com>

10-bit sample: http://www.rawsamples.ch/raws/phones/RAW_ONEPLUS_ONE-A0001.DNG
14-bit sample: https://drive.google.com/open?id=0B4JyRT3Lth5HVndyOTVOdWktM3J4TFEydTk1MnY3RWlpSzVBSigned-off-by: Nick Renieris <velocityra@gmail.com>

This enables decoding of DNG images generated by the 'DJI Zenmuse X7'
digital camera
Samples: https://www.dji.com/gr/zenmuse-x7/info#downloadsSigned-off-by: Nick Renieris <velocityra@gmail.com>

Also, ensure no false positives when determining DNG bayer images, by
setting them in tiff.c instead of relying on a heuristic.  There's no
way to determine this just from the JPEG data, so we have to pass this
information from outside the MJPEG decoder.
Signed-off-by: Nick Renieris <velocityra@gmail.com>

This fixes "X7 RAW" and "X7 CinemaDNG" samples here:
- https://www.dji.com/gr/zenmuse-x7/info#downloadsSigned-off-by: Nick Renieris <velocityra@gmail.com>

Signed-off-by: Nick Renieris <velocityra@gmail.com>

When the height is equal to the tile length (full-height tile)
after `height % tile_length` is applied with the current code,
it results in the operating tile_length to be 0.  This commit
makes this leftover logic only applies if it's necessary.
Signed-off-by: Nick Renieris <velocityra@gmail.com>

Some JPEGs [1] have incorrect DHT entries that map 2 codes to
the same value.

The second (last) mapping does not ever actually appear in the
code stream, therefore ignoring any mappings after the first one
fixes this.

Without this, an "mjpeg_decode_dc: bad vlc: 0:0" error is thrown.

In all known files, the 2 codes are mapped to symbol 0 so only
that case is checked.

[1]: Embedded JPEGs in "X7 RAW" and "X7 CinemaDNG" samples here:
     https://www.dji.com/gr/zenmuse-x7/info#downloadsSigned-off-by: Nick Renieris <velocityra@gmail.com>

Signed-off-by: Nick Renieris <velocityra@gmail.com>

Signed-off-by: Nick Renieris <velocityra@gmail.com>

Used a technique similar to lavc/tdsc.c for invoking the MJPEG decoder.

This commit adds support for:
- DNG tiles
- DNG tile huffman lossless JPEG decoding
- DNG 8-bpp ("packed" as dcraw calls it) decoding
- DNG color scaling [1]
  - LinearizationTable tag
  - BlackLevel tag

[1]: As specified in the DNG Specification - Chapter 5
Signed-off-by: Nick Renieris <velocityra@gmail.com>

Main image data in DNGs is usually comprised of tiles, each of which is a Huffman-encoded lossless JPEG.

Tested for ljpeg regressions with:
`ffmpeg -f lavfi -i testsrc=d=1 -vcodec ljpeg test.avi`
`ffmpeg test.avi out.avi`
The modified code in ljpeg_decode_rgb_scan runs without issues.
Signed-off-by: Nick Renieris <velocityra@gmail.com>

fix ticket: 8097
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Raphaël Zumer <rzumer@tebako.net>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Raphaël Zumer <rzumer@tebako.net>
Signed-off-by: James Almer <jamrial@gmail.com>

This is an alias for JEDEC P22.

The name associated with the value is also changed
from jedec-p22 to ebu3213 to match ITU-T H.273.
Signed-off-by: Raphaël Zumer <rzumer@tebako.net>
Signed-off-by: James Almer <jamrial@gmail.com>

Fixes: signed integer overflow: 1795032576 + 598344192 cannot be represented in type 'int'
Fixes: 16196/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TRUEMOTION2_fuzzer-5636723419119616

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

tools/target_dec_fuzzer: adjust pixel threshold for TRUEMOTION2, as it allows coding gigantic images on tiny input

Fixes: Timeout (137sec -> 6sec)
Fixes: 16090/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TRUEMOTION2_fuzzer-5674245178261504

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: left shift of negative value -1
Fixes: 16424/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMV3_fuzzer-5656579055026176
Fixes: 16358/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_VC1IMAGE_fuzzer-5714436358144000

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

non res_sprite leads to decoder delay which leads to assertion failure
Fixes: Assertion failure
Fixes: 16402/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMV3IMAGE_fuzzer-5704510034411520
Fixes: left shift of 1073741824 by 1 places cannot be represented in type 'int'
Fixes: 16425/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMV3IMAGE_fuzzer-5692858838810624

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: out of array read
Fixes: 16331/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMV3IMAGE_fuzzer-5672735195267072

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: signed integer overflow: 9223372036854775807 + 1 cannot be represented in type 'long'
Fixes: 16022/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5759796759756800

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

avio_feof() returns true both in case of actual EOF and in case of IO errors.
Some demuxers (matroska) have special handling to be able to return the proper
error for this exact reason, e.g.:

if (avio_feof(pb)) {
     if (pb->error) {
         return pb->error;
     } else {
         return AVERROR_EOF;
     }
}

However, most of the demuxers do not, and they simply return AVERROR_EOF if
avio_feof() is true, so there is a real chance that IO errors are mistaken for
EOF.

We might just say that the API user should always check the IO context error
attribute on EOF to make sure no IO errors happened, but not even ffmpeg.c does
this. It should be more intuitive to the API user if we simply return the IO
error as the return value of av_read_frame() instead of AVERROR_EOF.
Signed-off-by: Marton Balint <cus@passwd.hu>

Some security cams generate this, as well as some versions of VirtualDub and
VLC so support for _reading_ such files is justified.

Fixes ticket #7110.

See also this discussion: https://patchwork.ffmpeg.org/patch/8744/Signed-off-by: Marton Balint <cus@passwd.hu>

After a1b4f120 the teletext PTS values were set
to AV_NOPTS_VALUE if the stream of the PCR pid was discarded.

What actually matters is that if we parse the PCR of the PCR PID or not, so
let's use the cached discard value of the actual PCR PID instead of the stream
discard value, which may be different.

Also fixes ticket #7567, which was caused by the fact that teletext PTS values
were not touched if the PCR pid was discarded even before
a1b4f120.
Signed-off-by: Marton Balint <cus@passwd.hu>

Fixes: memory corruption
Fixes: 16702/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PNG_fuzzer-5768418552184832

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: out of array read
Fixes: 16510/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_VORBIS_fuzzer-5754510382727168

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Reviewed-by: "Li, Zhong" <zhong.li@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Pedro Arthur <bygrandao@gmail.com>

currently, the layer number is at the beginning of the .model file,
so we have to scan twice in python script, the first scan to get the
layer number. Only one scan needed after put the layer number at the
end of .model file.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Pedro Arthur <bygrandao@gmail.com>

the info can be saved in dnn operand object without regenerating again and again,
and it is also needed for layer split/merge, and for memory reuse.

to make things step by step, this patch just focuses on c code,
the change within python script will be added later.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Pedro Arthur <bygrandao@gmail.com>