avcodec: add an AVCodecContext field to signal types of packet, frame, and coded stream side data to export

Add an initial mvs flag to is, analog to the export_mvs flags2 one.
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

avformat/dashenc: write a capture time Producer Reference Time element when none is provided by the encoder

This way, the element will be present in any scenario when the write_prft option is used.
Signed-off-by: James Almer <jamrial@gmail.com>

This ensures it's written at the beginning of a segment in non streaming mode
when segment duration differs from fragment duration.
Signed-off-by: James Almer <jamrial@gmail.com>

Such errors may make sense for specific formats, but general parsing
logic shouldn't be treating these as errors regardless of the error
recognition mode.

Fixes loading of the following wave when using -err_detect explode:
https://cs.chromium.org/chromium/src/third_party/blink/web_tests/external/wpt/webaudio/resources/4ch-440.wavSigned-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

If an audio stream is present, the Sega FILM muxer checks for its
compability with the container during init, so that the very same check
needn't be repeated during writing the trailer.

Essentially the same is true for the presence of a video stream: It has
already been checked during init. Furthermore, after the check for the
presence of a video stream succeeded, a pointer is set to point to the
video stream. Yet said pointer (which was NULL before) will be
derefenced anyway regardless of the result of the check. Coverity thus
complained about this in CID 1434155 and removing this pointless check
will also fix this issue.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: left shift of 233 by 24 places cannot be represented in type 'int'
Fixes: 20736/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PCM_LXF_fuzzer-4829212685107200

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: out of array read
Fixes: 20742/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CDTOONS_fuzzer-5738148607033344

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

No testcases, found by code review when debuging issue found by oss-fuzz
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Adds support for the APM file format used by Ubisoft's Rayman 2.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>

Adds support for the ADPCM variant used in Rayman 2's files.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>

Commit 36e156be ("avformat/spdifenc: fix handling of large TrueHD
frame") added an obviously incorrect bitshift that caused incorrect
samples-per-frame calculation for TrueHD streams over 48kHz.

Fix that.

The TrueHD IEC 61937 encapsulation code uses a very naive method of
always inserting 24 TrueHD frames evenly in a MAT frame. This does not
work for larger frames as they may exceed the size of 1/24th of a MAT
frame.

To fix that, use the input_timing field in the TrueHD frame to determine
the proper position of the TrueHD frame in the MAT frame. That field is
basically a dts field, telling the time to feed this frame to the
decoder in sample count units.

This can cause a TrueHD frame to be split between two MAT frames, so a
second concatenation hd_buf is added, alternating with the first buffer.

Large frames are preceded by smaller frames that have input_timing
values that cause the frames to be sent out faster than the nominal rate
(i.e. increasing decoder latency, long decoder buffer), allowing the
larger frames to then be sent out slower than the nominal rate as the
decoder has enough data buffered to keep it busy.

This is preparation for adding a second hd_buf in a followup commit.

Also, slightly improve the comments for hd_buf_x members to clarify
which ones are actually used and kept up-to-date depending on which
codec is being muxed.

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Fix a segfault if OpenGL was not initialized before calling
write_header().

Log as [opengl @ 0xaddress] instead of [opengl outdev @ 0xaddress].

wtvfile_read_packet did not abide by the requirements of an
AVIOContext's read_packet-function: If it did not read anything,
it returned zero, which currently leads to a warning in read_packet_wrapper
in aviobuf.c. Said warning will be an av_assert2 as soon as
FF_API_OLD_AVIO_EOF_0 is zero (probably the next major version bump).
So instead forward the error code from the underlying protocol.

This error/assert is triggered in the wtv-demux FATE test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: out of array access
Fixes: 20660/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_QDM2_fuzzer-5658290216501248

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

squelch unknown escape code warnings
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Peter Ross <pross@xvid.org>

Enables option for hevc_qsv encoder:
    -extbrc

Improvements in BD-Rate could be observed with extbrc on.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>

Class name is used in show_help_children(avfilter_get_class(),...)
to prompt the available filters.

$ ffmpeg -h full

Before:
qsvscale AVOptions:

After:
scale_qsv AVOptions:
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>

Currently width_align and height_align are zero when encoding with mjpeg_qsv,
which causes "Error submitting the frame for encoding". This patch sets the alignments.

There is a little bit more about the problem here http://ffmpeg.org/pipermail/ffmpeg-user/2019-November/046143.htmlSigned-off-by: JonCookCubic <jon.cook@cubicmotion.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>

Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

It's not exclusive for Low Latency streaming. The muxer will serve partial
segments regardless of streaming mode.
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

Unlike Representation id, it's defined as an integer in the spec, and not as a
string.
Signed-off-by: James Almer <jamrial@gmail.com>

Fixes: signed integer overflow: 2045163756 * 2 cannot be represented in type 'int'
Fixes: Ticket5132

Found-by: tsmith
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: signed integer overflow: 0 - -9223372036854775808 cannot be represented in type 'long'
Fixes: Ticket8149

Found-by: Suhwan
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: signed integer overflow: -9223372036854775808 - 9223372036854775807 cannot be represented in type 'long'
Fixes: Ticket8142

Found-by: Suhwan
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>