Introduced in 93370d12

This makes sure errors in setting stream parameters are passed
on to the caller. This avoids successfully opening files while
some parameters aren't filled in properly.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Anton Khirnov <anton@khirnov.net>

Signed-off-by: Anton Khirnov <anton@khirnov.net>

Fixes sync in some samples (e.g. bugs 7581 and 8374 in VLC).
Based on a commit by Matthieu Bouron <matthieu.bouron@gmail.com>
Reported-by: Jean-Baptiste Kempf <jb@videolan.org>
CC: libav-stable@libav.org

Signed-off-by: Martin Storsjö <martin@martin.st>

This fixes reads out of bounds.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

We read 2 bytes for 15 out of 16 pixels, therefore we need to
have at least 30 bytes, not 16.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Decoded data is always written in pairs within this decoder.
This fixes writes out of bounds.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Previously, we returned 0, meaning successful decoding but 0
bytes consumed, leading to an infinite loop.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

If the input buffer contains more data after the deflate stream,
the loop previously left running infinitely, with inflate returning
Z_STREAM_END.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids setting a negative number of frames, ending up with a
negative average frame rate.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

If a zero-length video packet is to be returned, just return
AVERROR(EAGAIN) and switch back to the audio stream.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids a division by zero for G726.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids a division by zero.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

In lpc_prediction(), we write up to array element 'lpc_order' in
an array allocated to hold 'max_samples_per_frame' elements.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Even if the sample rate is valid, an invalid bitrate could
pass the mode combination test below.

CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids divisions by zero later (and possibly assertions in
time base scaling), since an invalid rate_flag combined with an
invalid bitrate below could pass the mode combination test.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

Remove the now unneeded stream pointer while at it.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Used by LXF.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Reported, analyzed and tested by Gabriel Gerard.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

When av_reallocp fails, the associated variables that keep track of
the number of elements in the array (and in some cases, the
separate number of allocated elements) need to be reset.

Not all of these might technically be needed, but it's better to
reset them if in doubt, to make sure variables don't end up
conflicting.
Signed-off-by: Martin Storsjö <martin@martin.st>

Pointers returned from av_malloc can't in general be passed
to av_realloc.
Signed-off-by: Martin Storsjö <martin@martin.st>

This check was mistakenly removed in 5626f994.
Signed-off-by: Martin Storsjö <martin@martin.st>

Also add options for specifying a certificate and key, which can
be used both when operating as client and as server.

Partially based on a patch by Peter Ross.
Signed-off-by: Martin Storsjö <martin@martin.st>

When passing a dict to the nested protocol, it will consume
the used options from it, so a separate copy needs to be used
when reopening the connection multiple times.
Signed-off-by: Martin Storsjö <martin@martin.st>

A file containing the trusted CA certificates needs to be
supplied via the ca_file AVOption, unless the TLS library
has got a system default file/database set up.

This doesn't check the hostname of the peer certificate with
openssl, which requires a non-trivial piece of code for
manually matching the desired hostname to the string provided
by the certificate, not provided as a library function.

That is, with openssl, this only validates that the received
certificate is signed with the right CA, but not that it is
the actual server we think we're talking to.

Verification is still disabled by default since we can't count
on a proper CA database existing at all times.
Signed-off-by: Martin Storsjö <martin@martin.st>

This fixes a regression with rgb cursors since b1e46988.
Signed-off-by: Martin Storsjö <martin@martin.st>