Fixes possible invalid memory accesses on corrupted data.

CC:libav-stable@libav.org
Bug-ID: CVE-2013-3674

This tries to find the most expressive part of the output of
armcc --vsn to include, giving a compiler identification of
"ARM Compiler 5.04 update 2 (build 82)" instead of just
"ARM Compiler 5.04" for armcc 5.0.

4.x versions of armcc output the following, for "armcc --vsn":
ARM C/C++ Compiler, RVCT4.0 [Build 925]
For evaluation purposes only
Software supplied by: ARM Limited

ARM C/C++ Compiler, 4.1 [Build 894]
For evaluation purposes only
Software supplied by: ARM Limited

5.0 versions output this:
Product: ARM Compiler 5.04
Component: ARM Compiler 5.04 update 2 (build 82)
Tool: armcc [5040081]
For evaluation purposes only
Software supplied by: ARM Limited
Signed-off-by: Martin Storsjö <martin@martin.st>

Bug-Id: 721
CC: libav-stable@libav.org
Sample-Id: 31230.mov

Avoid out of array accesses.

CC: libav-stable@libav.org
Bug-Id: CVE-2013-0848
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Fixes out of array accesses.

Bug-Id: CVE-2013-3672
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Fixes corruption of context

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Bug-Id: CVE-2014-2098
Signed-off-by: Anton Khirnov <anton@khirnov.net>

llvm's integrated assembler supports the AArch64 asm on darwin since
August 2014. So check $as first before using gas-preprocessor.pl via
$gas. Makes the checks specific for that the architecture specific asm
needs. PPC Altivec and AArch64 needs on ':vararg' for macro arguments.
Arm needs in addition the '.altmacro' directive.

All subtargets which should run the fate-filter-pixdesc% need to
generate and include tests/pixfmts.mak. Most noteable missing target was
fate itself.

And add flag to muxer documentation.
Nero chapters break some taggers (mp3tag and iTunes).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

The specification says the value is expressed in 10 bits including
the 4-byte CRC.

The previous implementation of the parser made four passes over each input
buffer (reduced to two if the container format already guaranteed the input
buffer corresponded to frames, such as with MKV). But these buffers are
often 200K in size, certainly enough to flush the data out of L1 cache, and
for many CPUs, all the way out to main memory. The passes were:

1) locate frame boundaries (not needed for MKV etc)
2) copy the data into a contiguous block (not needed for MKV etc)
3) locate the start codes within each frame
4) unescape the data between start codes

After this, the unescaped data was parsed to extract certain header fields,
but because the unescape operation was so large, this was usually also
effectively operating on uncached memory. Most of the unescaped data was
simply thrown away and never processed further. Only step 2 - because it
used memcpy - was using prefetch, making things even worse.

This patch reorganises these steps so that, aside from the copying, the
operations are performed in parallel, maximising cache utilisation. No more
than the worst-case number of bytes needed for header parsing is unescaped.
Most of the data is, in practice, only read in order to search for a start
code, for which optimised implementations already existed in the H264 codec
(notably the ARM version uses prefetch, so we end up doing both remaining
passes at maximum speed). For MKV files, we know when we've found the last
start code of interest in a given frame, so we are able to avoid doing even
that one remaining pass for most of the buffer.

In some use-cases (such as the Raspberry Pi) video decode is handled by the
GPU, but the entire elementary stream is still fed through the parser to
pick out certain elements of the header which are necessary to manage the
decode process. As you might expect, in these cases, the performance of the
parser is significant.

To measure parser performance, I used the same VC-1 elementary stream in
either an MPEG-2 transport stream or a MKV file, and fed it through avconv
with -c:v copy -c:a copy -f null. These are the gperftools counts for
those streams, both filtered to only include vc1_parse() and its callees,
and unfiltered (to include the whole binary). Lower numbers are better:

                Before          After
File  Filtered  Mean   StdDev   Mean   StdDev  Confidence  Change
M2TS  No        861.7  8.2      650.5  8.1     100.0%      +32.5%
MKV   No        868.9  7.4      731.7  9.0     100.0%      +18.8%
M2TS  Yes       250.0  11.2     27.2   3.4     100.0%      +817.9%
MKV   Yes       149.0  12.8     1.7    0.8     100.0%      +8526.3%

Yes, that last case shows vc1_parse() running 86 times faster! The M2TS
case does show a larger absolute improvement though, since it was worse
to begin with.

This patch has been tested with the FATE suite (albeit on x86 for speed).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Initialise VC1DSPContext for parser as well as for decoder.
Note, the VC-1 code doesn't actually use the function pointer yet.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

This permits re-use with parsers for codecs which use similar start codes.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Every supported format is converted to RGB.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

The decoder was producing different results when ASM was disabled.
Based on a long debug session with Kostya.

Based on a long debug session with Kostya.

The rationale is that you have a packed format in form
<greyscale sample> <alpha sample> <greyscale sample> <alpha sample>
and shortening greyscale to 'G' might make one thing about Greenscale instead.
An alias pixel format and color space name are provided for compatibility.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Bug-Id: 772
CC: libav-stable@libav.org
Found-By: Justin Ruggles <justin.ruggles@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

This makes the default of '1' more explicit than defaulting to '1' in
fate-run.sh and regression-funcs.sh if THREADS is not set.
Fixes the reported thread count in fate-cpu if THREADS is not set.

Icecast is basically a convenience wrapper around the HTTP protocol.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Diego Biurrun <diego@biurrun.de>

Bug-Id: CVE-2013-0868

inspired by a patch from Michael Niedermayer <michaelni@gmx.at>
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Diego Biurrun <diego@biurrun.de>

CC: libav-stable@libav.org

Signed-off-by: Diego Biurrun <diego@biurrun.de>

llvm's integrated assembler does not accept spaces as macro argument
delimiter when targeting darwin. Using a explicit delimiter is a good
idea in principle since it makes case like 'macro 4 -2' vs 'macro 4 - 2'
clear.

Add CPU count and number threads as informative values for fate.