libavfilter/vf_drawtext.c:844:49: warning: ISO C forbids conversion of function pointer to object pointer type [-Wpedantic]

Fixes several warnings of the type
libavformat/nut.c:207:42: warning: ISO C forbids conversion of function pointer to object pointer type [-Wpedantic]

libavcodec/ratecontrol.c:120:9: warning: ISO C forbids initialization between function pointer and ‘void *’ [-Wpedantic]
libavcodec/ratecontrol.c:121:9: warning: ISO C forbids initialization between function pointer and ‘void *’ [-Wpedantic]

This work is sponsored by, and copyright, Google.

The implementation tries to have smart handling of cases
where no pixels need the full filtering for the 8/16 width
filters, skipping both calculation and writeback of the
unmodified pixels in those cases. The actual effect of this
is hard to test with checkasm though, since it tests the
full filtering, and the benefit depends on how many filtered
blocks use the shortcut.

Examples of relative speedup compared to the C version, from checkasm:
                          Cortex       A7     A8     A9    A53
vp9_loop_filter_h_4_8_neon:          2.72   2.68   1.78   3.15
vp9_loop_filter_h_8_8_neon:          2.36   2.38   1.70   2.91
vp9_loop_filter_h_16_8_neon:         1.80   1.89   1.45   2.01
vp9_loop_filter_h_16_16_neon:        2.81   2.78   2.18   3.16
vp9_loop_filter_mix2_h_44_16_neon:   2.65   2.67   1.93   3.05
vp9_loop_filter_mix2_h_48_16_neon:   2.46   2.38   1.81   2.85
vp9_loop_filter_mix2_h_84_16_neon:   2.50   2.41   1.73   2.85
vp9_loop_filter_mix2_h_88_16_neon:   2.77   2.66   1.96   3.23
vp9_loop_filter_mix2_v_44_16_neon:   4.28   4.46   3.22   5.70
vp9_loop_filter_mix2_v_48_16_neon:   3.92   4.00   3.03   5.19
vp9_loop_filter_mix2_v_84_16_neon:   3.97   4.31   2.98   5.33
vp9_loop_filter_mix2_v_88_16_neon:   3.91   4.19   3.06   5.18
vp9_loop_filter_v_4_8_neon:          4.53   4.47   3.31   6.05
vp9_loop_filter_v_8_8_neon:          3.58   3.99   2.92   5.17
vp9_loop_filter_v_16_8_neon:         3.40   3.50   2.81   4.68
vp9_loop_filter_v_16_16_neon:        4.66   4.41   3.74   6.02

The speedup vs C code is around 2-6x. The numbers are quite
inconclusive though, since the checkasm test runs multiple filterings
on top of each other, so later rounds might end up with different
codepaths (different decisions on which filter to apply, based
on input pixel differences). Disabling the early-exit in the asm
doesn't give a fair comparison either though, since the C code
only does the necessary calcuations for each row.

Based on START_TIMER/STOP_TIMER wrapping around a few individual
functions, the speedup vs C code is around 4-9x.

This is pretty similar in runtime to the corresponding routines
in libvpx. (This is comparing vpx_lpf_vertical_16_neon,
vpx_lpf_horizontal_edge_8_neon and vpx_lpf_horizontal_edge_16_neon
to vp9_loop_filter_h_16_8_neon, vp9_loop_filter_v_16_8_neon
and vp9_loop_filter_v_16_16_neon - note that the naming of horizonal
and vertical is flipped between the libraries.)

In order to have stable, comparable numbers, the early exits in both
asm versions were disabled, forcing the full filtering codepath.

                           Cortex           A7      A8      A9     A53
vp9_loop_filter_h_16_8_neon:             597.2   472.0   482.4   415.0
libvpx vpx_lpf_vertical_16_neon:         626.0   464.5   470.7   445.0
vp9_loop_filter_v_16_8_neon:             500.2   422.5   429.7   295.0
libvpx vpx_lpf_horizontal_edge_8_neon:   586.5   414.5   415.6   383.2
vp9_loop_filter_v_16_16_neon:            905.0   784.7   791.5   546.0
libvpx vpx_lpf_horizontal_edge_16_neon: 1060.2   751.7   743.5   685.2

Our version is consistently faster on on A7 and A53, marginally slower on
A8, and sometimes faster, sometimes slower on A9 (marginally slower in all
three tests in this particular test run).
Signed-off-by: Martin Storsjö <martin@martin.st>

libavcodec/libxvid_rc.c:106:9: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]

The replacement code uses tempnam(), which is dangerous.
Such a fringe feature is not worth the trouble.

This work is sponsored by, and copyright, Google.

For the transforms up to 8x8, we can fit all the data (including
temporaries) in registers and just do a straightforward transform
of all the data. For 16x16, we do a transform of 4x16 pixels in
4 slices, using a temporary buffer. For 32x32, we transform 4x32
pixels at a time, in two steps of 4x16 pixels each.

Examples of relative speedup compared to the C version, from checkasm:
                         Cortex       A7     A8     A9    A53
vp9_inv_adst_adst_4x4_add_neon:     3.39   5.83   4.17   4.01
vp9_inv_adst_adst_8x8_add_neon:     3.79   4.86   4.23   3.98
vp9_inv_adst_adst_16x16_add_neon:   3.33   4.36   4.11   4.16
vp9_inv_dct_dct_4x4_add_neon:       4.06   6.16   4.59   4.46
vp9_inv_dct_dct_8x8_add_neon:       4.61   6.01   4.98   4.86
vp9_inv_dct_dct_16x16_add_neon:     3.35   3.44   3.36   3.79
vp9_inv_dct_dct_32x32_add_neon:     3.89   3.50   3.79   4.42
vp9_inv_wht_wht_4x4_add_neon:       3.22   5.13   3.53   3.77

Thus, the speedup vs C code is around 3-6x.

This is mostly marginally faster than the corresponding routines
in libvpx on most cores, tested with their 32x32 idct (compared to
vpx_idct32x32_1024_add_neon). These numbers are slightly in libvpx's
favour since their version doesn't clear the input buffer like ours
do (although the effect of that on the total runtime probably is
negligible.)

                           Cortex       A7       A8       A9      A53
vp9_inv_dct_dct_32x32_add_neon:    18436.8  16874.1  14235.1  11988.9
libvpx vpx_idct32x32_1024_add_neon 20789.0  13344.3  15049.9  13030.5

Only on the Cortex A8, the libvpx function is faster. On the other cores,
ours is slightly faster even though ours has got source block clearing
integrated.
Signed-off-by: Martin Storsjö <martin@martin.st>

This includes fixes by Henrik Gramner.

The forward transforms are derived from the reference encoder.
Signed-off-by: Martin Storsjö <martin@martin.st>

When decoding with threads enabled, the get_format callback will be
called with one of the per-thread codec contexts rather than with the
outer context.  If a hwaccel is in use too, this will add a reference
to the hardware frames context on that codec context, which will then
propagate to all of the other per-thread contexts for decoding.  Once
the decoder finishes, however, the per-thread contexts are not freed
normally, so these references leak.

This fixes crashes since 557c1675 in linux PIC builds.

Previously, movrelx silently used r12 as helper register, which
doesn't work when r12 is the destination register.
Signed-off-by: Martin Storsjö <martin@martin.st>

We reset .Lpic_gp to zero at the start of each function, which means
that the logic within movrelx for clearing gp when necessary will
be missed.

This fixes using movrelx in different functions with a different
helper register.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

The speedup for the large horizontal filters is surprisingly
big on A7 and A53, while there's a minor slowdown (almost within
measurement noise) on A8 and A9.

                            Cortex    A7        A8        A9       A53
orig:
vp9_put_8tap_smooth_64h_neon:    20270.0   14447.3   19723.9   10910.9
new:
vp9_put_8tap_smooth_64h_neon:    20165.8   14466.5   19730.2   10668.8
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

These are ported from the ARM version; it is essentially a 1:1
port with no extra added features, but with some hand tuning
(especially for the plain copy/avg functions). The ARM version
isn't very register starved to begin with, so there's not much
to be gained from having more spare registers here - we only
avoid having to clobber callee-saved registers.

Examples of runtimes vs the 32 bit version, on a Cortex A53:
                                     ARM   AArch64
vp9_avg4_neon:                      27.2      23.7
vp9_avg8_neon:                      56.5      54.7
vp9_avg16_neon:                    169.9     167.4
vp9_avg32_neon:                    585.8     585.2
vp9_avg64_neon:                   2460.3    2294.7
vp9_avg_8tap_smooth_4h_neon:       132.7     125.2
vp9_avg_8tap_smooth_4hv_neon:      478.8     442.0
vp9_avg_8tap_smooth_4v_neon:       126.0      93.7
vp9_avg_8tap_smooth_8h_neon:       241.7     234.2
vp9_avg_8tap_smooth_8hv_neon:      690.9     646.5
vp9_avg_8tap_smooth_8v_neon:       245.0     205.5
vp9_avg_8tap_smooth_64h_neon:    11273.2   11280.1
vp9_avg_8tap_smooth_64hv_neon:   22980.6   22184.1
vp9_avg_8tap_smooth_64v_neon:    11549.7   10781.1
vp9_put4_neon:                      18.0      17.2
vp9_put8_neon:                      40.2      37.7
vp9_put16_neon:                     97.4      99.5
vp9_put32_neon/armv8:              346.0     307.4
vp9_put64_neon/armv8:             1319.0    1107.5
vp9_put_8tap_smooth_4h_neon:       126.7     118.2
vp9_put_8tap_smooth_4hv_neon:      465.7     434.0
vp9_put_8tap_smooth_4v_neon:       113.0      86.5
vp9_put_8tap_smooth_8h_neon:       229.7     221.6
vp9_put_8tap_smooth_8hv_neon:      658.9     621.3
vp9_put_8tap_smooth_8v_neon:       215.0     187.5
vp9_put_8tap_smooth_64h_neon:    10636.7   10627.8
vp9_put_8tap_smooth_64hv_neon:   21076.8   21026.9
vp9_put_8tap_smooth_64v_neon:     9635.0    9632.4

These are generally about as fast as the corresponding ARM
routines on the same CPU (at least on the A53), in most cases
marginally faster.

The speedup vs C code is pretty much the same as for the 32 bit
case; on the A53 it's around 6-13x for ther larger 8tap filters.
The exact speedup varies a little, since the C versions generally
don't end up exactly as slow/fast as on 32 bit.
Signed-off-by: Martin Storsjö <martin@martin.st>

With apple tools, the linker fails with errors like these, if the
offset is negative:

ld: in section __TEXT,__text reloc 8: symbol index out of range for architecture arm64
Signed-off-by: Martin Storsjö <martin@martin.st>

Make them aligned, to allow efficient access to them from simd.
Signed-off-by: Martin Storsjö <martin@martin.st>

FLAC streams originating from the FLAC encoder send updated and more
complete STREAMINFO metadata as part of the last packet, so write that
to CodecPrivate instead of the incomplete one available in extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

aac_adtstoasc makes the aac extradata available only after the first packet
is filtered, and as packet side data.

Assume extradata will be available as part of the first packet if
avpriv_mpeg4audio_get_config() fails the first time due to missing extradata
and reserve space for the OutputSampleRate element in the Tracks master.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

This will allow to error out immediately if incompatible options are
passed on the command line instead of running time-consuming tests.

This avoids unnecessarily linking against xlib.

Also drop a related and now redundant informative output line.

Also drop a redundant output line.

Inspired by a patch from Martin Storsjö <martin@martin.st>.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Avoids a forward-declaration in the following commit.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Planes are ordered as the name suggests now.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>