Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Failures of the allocations that happen under the hood when using dynamic
buffers are usually completely unchecked and the Matroska muxer is no
exception to this.

The API has its part in this, because there is no documented way to
actually check for errors: The return value of both avio_get_dyn_buf()
as well as avio_close_dyn_buf() is only documented as "the length of
the byte buffer", so that using this to return errors would be an API
break.

Therefore this commit uses the only reliable way to check for errors
with avio_get_dyn_buf(): The AVIOContext's error flag. (This is one of
the advantages of avio_get_dyn_buf(): By not destroying the AVIOContext
it is possible to inspect this value.) Checking whether the size or the
pointer vanishes is not enough as it does not check for truncated output
(the dynamic buffer API is int based and so has to truncate the buffer
even when enough memory would be available; it's current actual limit is
even way below INT_MAX).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

If one already has the contents of a master elements in a buffer of
known size, then writing a EBML master element is no different from
writing an EBML binary element. It is overtly complicated to use
start/end_ebml_master() as these functions first write an unkown-length
size field of the appropriate length, then write the buffer's contents,
followed by a seek to the length field to overwrite it with the real
size (obtained via avio_tell() although it was already known in
advance), followed by another seek to the previous position. Just use
put_ebml_binary() instead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

There is a good upper bound for the maximum length of the Colour master
element; it is therefore unnecessary to use a dynamic buffer for it.
A simple buffer on the stack is enough. This commit implements this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

The Matroska muxer updates several header elements when the output is
seekable; if unseekable, the buffer containing the contents of the element
is immediately freed after writing. Before this commit, there were three
places doing exactly the same: Checking whether the output is seekable
and calling the function that writes and frees or the function that
just writes the EBML master. This has been unified; adding SeekHead
entries for these elements has been unified, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Up until now, SeekEntries were already added before
start_ebml_master_crc32() was even called and before we were actually
sure that we really write the element the SeekHead references: After
all, we might also error out later; and given that the allocations
implicit in dynamic buffers should be checked, end_ebml_master_crc32()
will eventually have to return errors itself, so that it is the right
place to add SeekHead entries.

The earlier behaviour is of course a remnant of the time in which
start_ebml_master_crc32() really did output something, so that the
position before start_ebml_master_crc32() needed to be recorded.
Erroring out later is also not as dangerous as it seems because in
this case no SeekHead will be written (if it happened when writing
the header, the whole muxing process would abort; if it happened
when writing the trailer (when writing chapters not available initially),
writing the trailer would be aborted and no SeekHead containing the
bogus chapter entry would be written).

This commit does not change the way the SeekEntries are added for those
elements that are output preliminarily; this is so because the SeekHead
is written before those elements are finally output and doing it
otherwise would increase the amount of seeks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

The mapping of streams to the various variant streams to be created by
the HLS muxer is roughly as follows: Space and tab separate variant
stream group maps while the entries in each variant stream group map are
separated by ','.

The parsing process of each variant stream group proceeded as follows:
At first the number of occurences of "a:", "v:" and "s:" in each variant
stream group is calculated so that one can can allocate an array of
streams with this number of entries. Then each entry is checked and the
check for stream numbers was deficient: It did check that there is a
number beginning after the ":", but it did not check that the number
extends until the next "," (or until the end).

This means that an invalid variant stream group like v:0_v:1 will not be
rejected; the problem is that the variant stream in this example is
supposed to have two streams associated with it (because it contains two
"v:"), yet only one stream is actually associated with it (because there
is no ',' to start a second stream specifier). This discrepancy led to
segfaults (null pointer dereferencing) in the rest of the code (when the
nonexistent second stream associated to the variant stream was inspected).

Furthermore, this commit also removes an instance of using atoi() whose
behaviour on a range error is undefined.

Fixes ticket #8652.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

fix ticket: 8625
and add testcase into url for double dot corner case
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

fix ticket: 8651
because the init fragment mp4 file name is without base url name,
so just modify it use the full url which splice after init function.

Tested-by: matclayton
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>

This patch adds possibility to use 'periodic-rekey' option with
multi-variant streams to hlsenc muxer. All streams variants
use parameters from the same key_info_file.

There are 2 sets of encryption options that kind of overlaps and add
complexity, so I tried to do the thing without changing too much code.

There is a little duplication of the key_file, key_uri, iv_string, etc
in the VariantStream since we copy it from hls to each variant stream,
but generally all the code remains the same to minimise appearing
of unexpected bugs. Refactoring could be done as a separate patch then as needed.
Signed-off-by: Yaroslav Pogrebnyak <yyyaroslav@gmail.com>

segment duration is using vs duration which compute by frame per second,
that can not fix problem of VFR video stream, so compute the duration
when split the segment, set the segment target duration use
current packet pts minus the prev segment end pts..
Reported-by: Zhao Jun <barryjzhao@tencent.com>
Reviewed-by: Zhao Jun <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>

and add fate-hlsenc for test all of the testcase
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

The only adjustable field is the gain. Some ripping/transcoding programs
have started to use it.

Fixes: shift exponent 32 is too large for 32-bit type 'int'
Fixes: 21647/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WAVPACK_fuzzer-5686168323883008

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Adds support for the soundbank files used by the Pro Pinball series of games.

https://lists.ffmpeg.org/pipermail/ffmpeg-devel/2020-May/262094.htmlSigned-off-by: Zane van Iperen <zane@zanevaniperen.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

and make it static again.

These functions have been moved from nutenc to aviobuf and internal.h
in f8280ff4 in order to use them in a
forthcoming patch in utils.c. Said patch never happened, so this commit
moves them back and makes them static, effectively reverting said
commit as well as f8280ff4 (which added
the ff-prefix to these functions).
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

It allows to combine several ffio_free_dyn_buf().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

NUT uses variable-length integers in order to for length fields.
Therefore the NUT muxer often writes data into a dynamic buffer in order
to get the length of it, then writes the length field using the fewest
amount of bytes needed. To do this, a new dynamic buffer was opened,
used and freed for each element which involves lots of allocations. This
commit changes this: The dynamic buffers are now resetted and reused.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

calculate_checksum in put_packet() is always 1.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

With the description in frame size with refs semantics (SPEC 7.2.5),
it is a requirement of bitstream conformance that for at least one
reference frame has the valid dimensions.

Modify the check to make sure the decoder works well in SINGLE_REFERENCE
mode that not all reference frames have valid dimensions.

Check and error out if invalid reference frame is used in inter_recon.

One of the failure case is a 480x272 inter frame (SINGLE_REFERENCE mode)
with following reference pool:

0.  960x544    LAST    valid
1. 1920x1088 GOLDEN  invalid, but not used in single reference mode
2. 1920x1088 ALTREF  invalid, but not used in single reference mode
3~7  ...     Unused

Identical logic in libvpx:
<https://github.com/webmproject/libvpx/blob/master/vp9/decoder/vp9_decodeframe.c#L736>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Hard coded parameters for qmin and qmax are currently used to initialize
v4l2_m2m device. This commit uses values from avctx->{qmin,qmax} if they
are set.
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>

Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

Report by Marton after commit.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

ff_vaapi_encode_close() is not enough to free the resources like cbs
if initialization failure happens after codec->configure (except for
vp8/vp9).

We need to call avctx->codec->close() to deallocate, otherwise memory
leak happens.

Add FF_CODEC_CAP_INIT_CLEANUP for vaapi encoders and deallocate the
resources at free_and_end inside avcodec_open2().
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>

Since commit 979b5b89, reverting the
Matroska ContentCompression is no longer done inside
matroska_parse_frame() (the function that creates AVPackets out of the
parsed data (unless we are dealing with certain codecs that need special
handling)), but instead in matroska_parse_block(). As a consequence,
the data that matroska_parse_frame() receives is no longer always owned
by an AVBuffer; it is owned by an AVBuffer iff no ContentCompression needed
to be reversed; otherwise the data is independently allocated and needs
to be freed on error.

Whether the data is owned by an AVBuffer or not is indicated by a variable
buf of type AVBufferRef *: If it is NULL, the data is independently
allocated, if not it is owned by the underlying AVBuffer (and is used to
avoid copying the data when creating the AVPackets).

Because the allocation of the buffer holding the uncompressed data happens
outside of matroska_parse_frame() (if a ContentCompression needs to be
reversed), the data is passed as uint8_t ** in order to not leave any
dangling pointers behind in matroska_parse_block() should the data need to
be freed: In case of errors, said uint8_t ** would be av_freep()'ed in
case buf indicated the data to be independently allocated.

Yet there is a problem with this: Some codecs (namely WavPack and
ProRes) need special handling: Their packets are only stored in
Matroska in a stripped form to save space and the demuxer reconstructs
full packets. This involved allocating a new, enlarged buffer. And if
an error happens when trying to wrap this new buffer into an AVBuffer,
this buffer needs to be freed; yet instead the given uint8_t ** (holding
the uncompressed, yet still stripped form of the data) would be freed
(av_freep()'ed) which certainly leads to a memleak of the new buffer;
even worse, in case the track does not use ContentCompression the given
uint8_t ** must not be freed as the actual data is owned by an AVBuffer
and the data given to matroska_parse_frame() is not the start of the
actual allocated buffer at all.

Both of these issues are fixed by always freeing the current data in
case it is independently allocated. Furthermore, while it would be
possible to track whether the pointer from matroska_parse_block() needs
to be reset or not, there is no gain in doing so, as the pointer is not
used at all afterwards and the sematics are clear: If the data passed
to matroska_parse_frame() is independently allocated, then ownership
of the data passes to matroska_parse_frame(). So don't pass the data
via uint8_t **.

Fixes Coverity ID 1462661 (the issue as described by Coverity is btw
a false positive: It thinks that this error can be triggered by ProRes
with a size of zero after reconstructing the original packets, but the
reconstructed packets can't have a size of zero).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

the parameter should boolean

Fixes ticket #8622
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>

Will be reused in the following patch.
Signed-off-by: James Almer <jamrial@gmail.com>

So that NAL types other than Parameter Set ones may use it.
Signed-off-by: James Almer <jamrial@gmail.com>