* qatar/master:
  avconv: use default alignment for audio buffer
  avcodec: use align == 0 for default alignment in avcodec_fill_audio_frame()
  avutil: use align == 0 for default alignment in audio sample buffer functions
  avutil: allow NULL linesize in av_samples_fill_arrays() and av_samples_alloc()
  avconv: remove OutputStream.picref.
  avconv: only set SAR once on the decoded frame.
  avcodec: validate the channel layout vs. channel count for decoders
  audioconvert: make av_get_channel_layout accept composite names.
  avutil: add av_get_packed_sample_fmt() and av_get_planar_sample_fmt()

Conflicts:
	doc/APIchanges
	ffmpeg.c
	libavcodec/utils.c
	libavcodec/version.h
	libavutil/audioconvert.c
	libavutil/audioconvert.h
	libavutil/avutil.h
	libavutil/samplefmt.c
	libavutil/samplefmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Decode output must be converted to rgb24 to avoid CRC difference
due to palette being stored in machine endianness.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

30% faster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Since those are pseudo-palette formats, swscale does not write
into data[1], swscale must initialize the palette properly itself.
This lead to frames that actually decoded as all-gray before.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

This fixes that the GIF encoder crashes with it because
it has no palette.
And the arguments for the pseudopalette apply to gray8 as
much as to RGB8 etc.
In addition the changes required in lavfi should be needed anyway
when adding support for RGB8 etc.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

We can't use whether the input format is paletted to decide that
the output format has a palette in data[1], too, that makes no sense.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Resolution changes are usually only used to scale with
network bandwidth, the (full) resolution specified in the
RM header really is authoritative.
While I am not sure this is the best solution, it is a
conservative approach that still should fix the most
common cases.
In particular, it fixes aspect with the sample from trac
issue #785 (in MPlayer, ffplay seems to just ignore
sample aspect changes in mid-playback).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

When decoding LATM, this function will not process extradata
but a different buffer.
It seems this was forgotten to update when LATM support
was added.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Use default alignment in audio_get_buffer()

It's only used inside transcode_video() and there's no point in
preserving it between subsequent calls. So use a local variable instead.

No point in repeating the assignment for each output stream.

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Set avctx->channel_layout to 0 if the channel count does not match
avctx->channels.

Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Based on a patch by Clément Bœsch <ubitux@gmail.com>

* qatar/master:
  rtsp: Don't use av_malloc(0) if there are no streams
  rtsp: Don't use uninitialized data if there are no streams
  vaapi: mpeg2: fix slice_vertical_position calculation.
  hwaccel: mpeg2: decode first field, if requested.
  cosmetics: Fix indentation
  rtsp: Don't expose the MS-RTSP RTX data stream to the caller
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

This makes it easy to allow people to run tests that are disabled
(e.g. because they are broken) without having to hack Makefiles
by adding the test name to FATE_TESTS-no.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Use the correct init function to avoid crashes due to writing
to a rodata location.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This uses the same code as in decode_video also in decode_audio.
Should fix valgrind FATE failures for nellymoser encode test.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

VASliceParameterBufferMPEG2.slice_vertical_position shall express
the slice vertical position from the original bitstream. The HW
decoder will correctly decode to the right line computed from the
appropriate top_field_first and is_first_field flags.

This patch aligns with DXVA's definition, which is what most HW and
drivers expect. In particular, Intel PowerVR (Cedarview et al.) and
NVIDIA (through VA-to-VDPAU layer). Since it looks more complex to fix
binary drivers, I aligned the Intel Gen driver (Sandy Bridge et al.)
to this behaviour, while maintaining compatibility with codec layers
not providing this patch yet.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Martin Storsjö <martin@martin.st>

If user opted to present fields as they come, then the first field
picture needs to be submitted to the HW for decoding. In particular,
this fixes MPEG-2 decoding of interlaced streams.

Tested on Intel Cedar Trail, Sandy Bridge and Ivy Bridge platforms.
Someone reported on the ffmpeg-devel@ list this also works on DXVA
(Windows) and other Linux platforms (NVIDIA, through the VA wrapper).

This also means a similar patch to non-hwaccel VDPAU may be necessary.

Note: I believe the SLICE_FLAG_ALLOW_FIELD is useless since the first
field shall always be submitted to the HW anyway. Nobody uses HW accels
(dxva, vaapi, vdpau, etc.) without that flag though.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Since we cannot specify decode parameters (and also because
it is better in principle) the 1-channel reference file
needs to be enabled, too.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>