* commit '610b18e2':
  x86: qpel: Move fullpel and l2 functions to a separate file
  bfin: Make vp3 functions static

Conflicts:
	libavcodec/bfin/vp3_bfin.c
	libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'aa8d8953':
  bfin: Don't use the vp3 idct functions if bitexact behaviour is expected

Conflicts:
	libavcodec/bfin/vp3_bfin.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

This way, they can be shared between mpeg4qpel and h264qpel without
requiring either one to be compiled unconditionally.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

In the non-bitexact mode, vp3 currently decodes to the same
frame crcs as before 28f9ab70 (and the output visually looks
correct).
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

From 312 to 89/68 (sse/sse2) cycles on Arrandale and Win64.
Sandybridge: 68/47 cycles.

Having a loop counter is a 7 cycle gain.
Unrolling is another 7 cycle gain.
Working in reverse scan is another 6 cycles.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Sample & pseudo code provided by Vladimir "VAG" Gneushev.
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Fixes Ticket2395
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fixes Ticket2392
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Text subtitles packets are not 0-terminated (and if they are,
it is handled by the recoding process since 0 is a valid
Unicode code point). The terminating 0 would overwrite the
last payload octet.

OTOH, packets must be 0-padded.

Fix a problem reported in trac ticket #2431.

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Fixes Ticket 2265.

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

It produces vissible correlation between lines
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

This patch can be controversial, by assuming floats are IEEE-754 and
particular behaviour of the FPU will get in the way.
Timing on Arrandale and Win32 (thus, x87 FPU is used in the reference).

sbr_qmf_pre_shuffle_c: 115 to 76
sbr_neg_odd_64_c: 84 to 55
sbr_qmf_post_shuffle_c: 112 to 83
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

1410 cycles to 1148 on Arrandale/Win64.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* qatar/master:
  x86: sbrdsp: Implement SSE neg_odd_64

Conflicts:
	libavcodec/x86/sbrdsp.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'a862c7d3':
  Integrate lcov/gcov into Libav

Conflicts:
	Makefile
	common.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Found-By: littlebat <dashing.meng@gmail.com>

Timing on Arrandale:
        C   SSE
Win32:  57   44
Win64:  47   38
Unrolling and not storing mask both save some cycles.
Signed-off-by: Diego Biurrun <diego@biurrun.de>

* qatar/master:
  h261: Move mvmap table to the only place it is used

Conflicts:
	libavcodec/h261data.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '0404ec61':
  h261: cosmetics: Move functions to avoid forward declarations

Conflicts:
	libavcodec/h261dec.c
	libavcodec/h261enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'b78f81c8':
  h261: K&R formatting and prettyprinting cosmetics

Conflicts:
	libavcodec/h261_parser.c
	libavcodec/h261data.h
	libavcodec/h261dec.c
	libavcodec/h261enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '66ac3dbf':
  h261: Move function declarations to h261.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'ed16c2db':
  h261: Remove H.261 loop filter from dsputil
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'ae35d91d':
  h261: Move ff_h261_rl_table_store declaration to header file
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

The gcov/lcov are a common toolchain for visualizing code coverage with
the GNU/Toolchain. The documentation and implementation of this
integration was heavily inspired from the blog entry by Mike Melanson:
http://multimedia.cx/eggs/using-lcov-with-ffmpeg/

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>