Speeds up both use cases by 30%.

By default now, if AV_EF_CRCCHECK or AV_EF_IGNORE_ERR are enabled the decoder
will skip the chunk and carry on with the next one. This should make the
decoder able to decode more corrupt files because the functions which decode
individual chunks will very likely error out if fed invalid data and stop the
decoding of the entire image.

A lot of files have CRC included.
The CRC only covers 34 bytes at most from the frame but it should still be
enough for some amount of error detection.

The CRC flag is only signalled once every few minutes but CRC is still
always present so the patch uses the file version instead.
CRC on 24-bit files wants non-padded samples so skip such files.
Some corrupt samples may have been output before the final check
depending on the -max_samples setting.

The size of a single allocation performed by av_malloc() or av_realloc()
is supposed to be bounded by max_alloc_size, which defaults to INT_MAX
and can be set by the user; yet currently this is not completely
honoured: The actual value used is max_alloc_size - 32. How this came
to be can only be understood historically:

a) 0ecca7a4 disallowed allocations
> INT_MAX. At that time the size parameter of av_malloc() was an
unsigned and the commentary added ("lets disallow possible ambiguous
cases") indicates that this was done as a precaution against calling the
functions with negative int values. Genuinely limiting the size of
allocations to INT_MAX doesn't seem to have been the intention given
that at this time the memalign hack introduced in commit
da9b170c (which when enabled increased
the size of allocations slightly so that one can return a correctly
aligned pointer that actually does not point to the beginning of the
allocated buffer) was already present.
b) Said memalign hack allocated 17 bytes more than actually desired, yet
allocating 16 bytes more is actually enough and so this was changed in
a9493601; this commit also replaced
INT_MAX by INT_MAX - 16 (and made the limit therefore a limit on the size
of the allocated buffer), but kept the comment, although there is nothing
ambiguous about allocating (INT_MAX - 16)..INT_MAX.
c) 13dfce3d then increased 16 to 32 for
AVX, 6b4c0be5 replaced INT_MAX by
MAX_MALLOC_SIZE (which was of course defined to be INT_MAX) and
5a8e9942 added max_alloc_size and made
it user-selectable.
d) 4fb311c8 then dropped the memalign
hack, yet it kept the -32 (probably because the comment about ambiguous
cases was still present?), although it is no longer needed at all after
this commit. Therefore this commit removes it and uses max_alloc_size
directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Fixes: memleak
Fixes: 19949/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5743636058210304

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Call the encoder's internal AVCodec.encode2() function instead.
Signed-off-by: James Almer <jamrial@gmail.com>

It avoids leaving dangling pointers behind in memory.

Also remove redundant checks for whether the URLContext to be closed is
already NULL.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Some flac muxers write truncated metadata picture size if the picture
data do not fit in 24 bits. Detect this by truncting the size found inside
the picture block and if it matches the block size use it and read rest
of picture data.

This workaround is only for flac files and not ogg files with flac
METADATA_BLOCK_PICTURE comments and it can be disabled with strict level
above normal. Currently there is a 500MB limit on truncate size to protect
from large memory allocations.

The truncation bug in lavf flacenc was fixed in e447a4d1
but based on existing broken files other unknown flac muxers seems to truncate also.
Before the fix a broken flac file for reproduction could be generated with:
ffmpeg -f lavfi -i sine -f lavfi -i color=red:size=2400x2400 -map 0:0 -map 1:0 -c:v:0 bmp -disposition:1 attached_pic -t 1 test.flac

Fixes ticket 6333
Signed-off-by: Anton Khirnov <anton@khirnov.net>

ff_id3v2_parse_apic/chapters/priv/priv_dict all had a parameter
extra_meta of type ID3v2ExtraMeta ** as if the functions wanted to make
*extra_meta point to something else. But they don't, so just use an
ID3v2ExtraMeta *.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Up until now, the ID3v2ExtraMeta structure (which is used when parsing
ID3v2 tags containing attached pictures, chapters etc.) contained a
pointer to separately allocated data that depended on the type of the
tag. Yet the difference of the sizes of the largest and the smallest of
these structures is fairly small, so that it is better to simply include
a union of all the possible types of tag-dependent structures in
ID3v2ExtraMeta. This commit implements this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

If the write_id3v2 option is set, the aiff muxer would write id3v2 tags
if there is global metadata or if there are attached pics to write.
Chapters are ignored in this check that precedes writing id3v2 tags.
Yet 47ac3449 added support for writing
chapters as id3v2 tags, so one should check for the existence of chapters,
too; otherwise the chapters would only be written in case there is
global metadata or an attached pic.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

It's not a decoding exclusive function anymore.
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Just including icodecapi.h + codecapi.h apparently misses some bits,
that MSVC doesn't complain about, but Clang does. Thus add a missing
header to the custom hacky include path (required for keeping
ICodecAPI visible when building in UWP mode, as it is intended to).

The issue in Windows SDK headers about ICodecAPI availability in
UWP/app mode has been reported upstream at
https://developercommunity.visualstudio.com/content/problem/1037125/icodecapi-not-visible-when-compiling-in-uwp-mode.html,
and later also filed in Feedback Hub (which can't be linked to
externally).
Signed-off-by: Martin Storsjö <martin@martin.st>

This should significantly improve the performance with certain
filterchains.

Otherwise custom vulkan device contexts won't work.

This allows us to speed up only-uploading or only-downloading use cases.

They're nothing special, and there's no reason they should always use the
default flags.

Some users may need special formats that aren't available when the STORAGE
flag bit is set, which would result in allocations failing.

This was never actually used, likely due to confusion, as the device context
also had one used for uploads and downloads.
Also, since we're only using it for very quick image barriers (which are
practically free on all hardware), use the compute queue instead of the
transfer queue.

If an external pool was provided we skipped all of frames init,
including the exec context.

This commit makes full use of the enabled queues to provide asynchronous
uploads of images (downloads remain synchronous).
For a pure uploading use cases, the performance gains can be significant.

Makes it easier to support multiple queues

Some things like using ImageLists were from a really old version that
still used multiplanar images.

With this, the puzzle of making libplacebo, ffmpeg and any other Vulkan
API users interoperable is complete.
Users of both libraries can initialize one another's contexts without having
to create a new one.

This, along with the next patch, are the last missing pieces to being
interoperable with libplacebo.

This allows for users who derive devices to set options for the
new device context they derive.
The main use case of this is to allow users to enable extensions
(such as surface drawing extensions) in Vulkan while deriving from
the device their frames are on. That way, users don't need to write
any initialization code themselves, since the Vulkan spec invalidates
mixing instances, physical devices and active devices.
Apart from Vulkan, other hwcontexts ignore the opts argument since they
don't support options at all (or in VAAPI and OpenCL's case, options are
currently only used for device selection, which device_derive overrides).

The Xiph foundation never standardized either Daala nor its mapping in Ogg,
and all files that were created are undecodable without knowledge of the
git hash.