This was broken by 4e528206 - the webp
decoder was assuming that it could set the output pixfmt of the vp8
decoder directly, but after that change it no longer could because
ff_get_format() was used instead.  This adds an internal get_format()
callback to webp use of the vp8 decoder to override the pixfmt
appropriately.

The Intel proprietary VAAPI driver enforces the restriction that a
buffer must be created inside an existing context, so just ensure
this is always true.

Previously this was leaking, though it actually hit an assert making
sure that the buffer had already been cleared when freeing the picture.

When slice_h is rounded up due to chroma subsampling, there's
a risk that jobnr * slice_h exceeds frame->height.

Prior to a638e918, this wasn't an issue for the last slice
of a frame, since slice_end was set to frame->height for the last
slice.

a638e918 tried to fix the case where other slices than the
last one would exceed frame->height (which can happen where the
number of slices/threads is very large compared to the frame
height).

However, the fix in a638e918 instead broke other cases,
where slice_h * nb_threads < frame->height. Therefore, make
sure the last slice always ends at frame->height.

CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>

This fixes building with clang for linux with PIC enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>

If the stream timebase is coarser than the muxing timebase then the
monotonisation process may fail because adding one to the timestamp
need not actually produce a different timestamp after the rescale.

This avoids a lot of boilerplate code within the decoder wrapper itself.
Signed-off-by: Martin Storsjö <martin@martin.st>

Some muxers may use the BMP_HEADER Format Data size instead
of the ASF-specific one.

Bug-Id: 1020
CC: libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>

Newer versions of libxcb have xcb-foo pkg-config files that do not declare
their xcb dependency so that required linker flags will not be generated.

Bug-Id: 1017
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

The driver is somewhat bitrotten (not updated for years) but is still
usable for decoding with this change.  To support it, this adds a new
driver quirk to indicate no support at all for surface attributes.

Based on a patch by wm4 <nfxjfg@googlemail.com>.

In this case, the user only supplies a device and the frame context
is allocated internally by lavc.

For use by codec implementations which can allocate frames internally.

Signed-off-by: Martin Storsjö <martin@martin.st>

This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.
Signed-off-by: Martin Storsjö <martin@martin.st>

This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.
Signed-off-by: Martin Storsjö <martin@martin.st>

Avoid a floating point exception.

Bug-Id: 1027
CC: libav-stable@libav.org

The early check for inconsistent in-source vs out-of-source build
cannot generate a config.log otherwise.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

D3D9Ex uses different driver paths. This helps with "headless"
configurations when no user logs in. Plain D3D9 device creation will
fail if no user is logged in, while it works with D3D9Ex.
Signed-off-by: Anton Khirnov <anton@khirnov.net>

This is an extended version of the AVFrame.opaque field, which can be
used to attach arbitrary user information to an AVFrame.

The usefulness of the opaque field is rather limited, because it can
store only up to 32 bits of information (or 64 bit on 64 bit systems).
It's not possible to set this field to a memory allocation, because
there is no way to deallocate it correctly.

The opaque_ref field circumvents this by letting the user set an
AVBuffer, which makes the user data refcounted.
Signed-off-by: Anton Khirnov <anton@khirnov.net>

This will avoid every caller from hardcoding some specific alignment,
which may break in the future with new instruction sets.

This is no longer done automatically for filters marked as
hwframe-aware.

Before this commit, AVIOContext is to be freed with a plain av_free(),
which prevents us from adding any deeper structure to it.

Signed-off-by: Martin Storsjö <martin@martin.st>

Previously we first calculated hev, and then negated it.

Since we were able to schedule the negation in the middle
of another calculation, we don't see any gain in all cases.

Before:                     Cortex A7      A8      A9     A53  A53/AArch64
vp9_loop_filter_v_4_8_neon:     147.0   129.0   115.8    89.0         88.7
vp9_loop_filter_v_8_8_neon:     242.0   198.5   174.7   140.0        136.7
vp9_loop_filter_v_16_8_neon:    500.0   419.5   382.7   293.0        275.7
vp9_loop_filter_v_16_16_neon:   971.2   825.5   731.5   579.0        453.0
After:
vp9_loop_filter_v_4_8_neon:     143.0   127.7   114.8    88.0         87.7
vp9_loop_filter_v_8_8_neon:     241.0   197.2   173.7   140.0        136.7
vp9_loop_filter_v_16_8_neon:    497.0   419.5   379.7   293.0        275.7
vp9_loop_filter_v_16_16_neon:   965.2   818.7   731.4   579.0        452.0
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

Before:                           Cortex A53
vp9_inv_dct_dct_16x16_sub1_add_neon:   235.3
vp9_inv_dct_dct_32x32_sub1_add_neon:   555.1
After:
vp9_inv_dct_dct_16x16_sub1_add_neon:   180.2
vp9_inv_dct_dct_32x32_sub1_add_neon:   475.3
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

Before:                            Cortex A7      A8      A9     A53
vp9_inv_dct_dct_16x16_sub1_add_neon:   273.0   189.5   211.7   235.8
vp9_inv_dct_dct_32x32_sub1_add_neon:   752.0   459.2   862.2   553.9
After:
vp9_inv_dct_dct_16x16_sub1_add_neon:   226.5   145.0   225.1   171.8
vp9_inv_dct_dct_32x32_sub1_add_neon:   721.2   415.7   727.6   475.0
Signed-off-by: Martin Storsjö <martin@martin.st>

No measured speedup on a Cortex A53, but other cores might benefit.
Signed-off-by: Martin Storsjö <martin@martin.st>

Before:                    Cortex A7      A8     A9     A53
vp9_put_8tap_smooth_4h_neon:   378.1   273.2  340.7   229.5
After:
vp9_put_8tap_smooth_4h_neon:   352.1   222.2  290.5   229.5
Signed-off-by: Martin Storsjö <martin@martin.st>

Fold the field lengths into the macro.

This makes the macro invocations much more readable, when the
lines are shorter.

This also makes it easier to use only half the registers within
the macro.
Signed-off-by: Martin Storsjö <martin@martin.st>

In order to avoid potential integer overflow change the comparison
and make sure to use the same unsigned type for both elements.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

This was missing from 77c23704, fixing building.
Signed-off-by: Martin Storsjö <martin@martin.st>