libavcodec/x86/rv40dsp_init.c:97:2: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
libavcodec/x86/vp9dsp_init.c:94:40: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]

In recent lld-link versions, this command prints the version to
stdout, but also prints an error to stderr:

$ lld-link -flavor gnu --version
LLD 4.0.0 (trunk 285641)
lld-link: error: no input files
lld-link: error: target emulation unknown: -m or at least one .o file required
Signed-off-by: Martin Storsjö <martin@martin.st>

This fixes errors like this when building non-pic binaries with armv6
as baseline:

Error: invalid literal constant: pool needs to be closer
Signed-off-by: Martin Storsjö <martin@martin.st>

Can map to any supported software format (using a GPU copy if it
doesn't actually match the surface format underneath).

Takes a frame associated with a hardware context as input and maps it
to something else (another hardware frame or normal memory) for other
processing.  If the frame to map was originally in the target format
(but mapped to something else), the original frame is output.

Also supports mapping backwards, where only the output has a hardware
context.  The link immediately before will be supplied with mapped
hardware frames which it can write directly into, and this filter
then unmaps them back to the actual hardware frames.

Adds the new av_hwframe_map() function, which allows mapping between
hardware frames and normal memory, along with internal support for
implementing it.

Also adds av_hwframe_ctx_create_derived(), for creating a hardware
frames context associated with one device using frames mapped from
another by some hardware-specific means.

libavutil/x86/float_dsp_init.c(144) : warning C4028: formal parameter 1 different from declaration
libavutil/x86/float_dsp_init.c(144) : warning C4028: formal parameter 2 different from declaration

libavcodec/dnxhdenc.c(326) : warning C4028: formal parameter 1 different from declaration
libavcodec/dnxhdenc.c(329) : warning C4028: formal parameter 1 different from declaration

libavcodec/pixblockdsp.c(58) : warning C4028: formal parameter 1 different from declaration
libavcodec/pixblockdsp.c(63) : warning C4028: formal parameter 1 different from declaration
libavcodec/pixblockdsp.c(66) : warning C4028: formal parameter 1 different from declaration

libavcodec/ituh263dec.c(215) : warning C4028: formal parameter 1 different from declaration
libavcodec/ituh263dec.c(215) : warning C4028: formal parameter 2 different from declaration

Broken by e3fb74f7.
Signed-off-by: Diego Biurrun <diego@biurrun.de>

libavcodec/svq3.c:627:29: warning: unused function 'dctcoef_get' [-Wunused-function]

libavcodec/intrax8.c(776) : warning C4028: formal parameter 1 different from declaration

The include of config.h was added in 2012 in 1d9c2dc8, due to
the use of CONFIG_SNOW_ENCODER ifdefs within options_table.h.
When the snow codec was dropped later (in a0c5917f in 2013),
this include no longer served any purpose.

options_table.h is included in builds for the host as well, when
building documentation. config.h should not be included in code
that is built for the host, since it can contain workarounds
for the target compiler/environment, like adding a missing define
of restrict, defining getenv(x) to NULL for environments that lack
getenv.

The seemingly innocent include reordering in 2025d378 broke
builds that have getenv(x) defined to NULL in config.h (Windows CE
and Windows Phone/RT), since libavcodec/options_table.h include
config.h, while libavformat/options_table.h end up bringing in
more system headers, and those system headers can contain a proper
definition of getenv, which clash with the getenv define in config.h.
This was avoided earlier as long as libavformat/options_table.h (or
avformat.h) was included before libavcodec/options_table.h.

This fixes builds for Windows Phone/RT and CE.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

The filter coefficients are signed values, where the product of the
multiplication with one individual filter coefficient doesn't
overflow a 16 bit signed value (the largest filter coefficient is
127). But when the products are accumulated, the resulting sum can
overflow the 16 bit signed range. Instead of accumulating in 32 bit,
we accumulate the largest product (either index 3 or 4) last with a
saturated addition.

(The VP8 MC asm does something similar, but slightly simpler, by
accumulating each half of the filter separately. In the VP9 MC
filters, each half of the filter can also overflow though, so the
largest component has to be handled individually.)

Examples of relative speedup compared to the C version, from checkasm:
                       Cortex      A7     A8     A9    A53
vp9_avg4_neon:                   1.71   1.15   1.42   1.49
vp9_avg8_neon:                   2.51   3.63   3.14   2.58
vp9_avg16_neon:                  2.95   6.76   3.01   2.84
vp9_avg32_neon:                  3.29   6.64   2.85   3.00
vp9_avg64_neon:                  3.47   6.67   3.14   2.80
vp9_avg_8tap_smooth_4h_neon:     3.22   4.73   2.76   4.67
vp9_avg_8tap_smooth_4hv_neon:    3.67   4.76   3.28   4.71
vp9_avg_8tap_smooth_4v_neon:     5.52   7.60   4.60   6.31
vp9_avg_8tap_smooth_8h_neon:     6.22   9.04   5.12   9.32
vp9_avg_8tap_smooth_8hv_neon:    6.38   8.21   5.72   8.17
vp9_avg_8tap_smooth_8v_neon:     9.22  12.66   8.15  11.10
vp9_avg_8tap_smooth_64h_neon:    7.02  10.23   5.54  11.58
vp9_avg_8tap_smooth_64hv_neon:   6.76   9.46   5.93   9.40
vp9_avg_8tap_smooth_64v_neon:   10.76  14.13   9.46  13.37
vp9_put4_neon:                   1.11   1.47   1.00   1.21
vp9_put8_neon:                   1.23   2.17   1.94   1.48
vp9_put16_neon:                  1.63   4.02   1.73   1.97
vp9_put32_neon:                  1.56   4.92   2.00   1.96
vp9_put64_neon:                  2.10   5.28   2.03   2.35
vp9_put_8tap_smooth_4h_neon:     3.11   4.35   2.63   4.35
vp9_put_8tap_smooth_4hv_neon:    3.67   4.69   3.25   4.71
vp9_put_8tap_smooth_4v_neon:     5.45   7.27   4.49   6.52
vp9_put_8tap_smooth_8h_neon:     5.97   8.18   4.81   8.56
vp9_put_8tap_smooth_8hv_neon:    6.39   7.90   5.64   8.15
vp9_put_8tap_smooth_8v_neon:     9.03  11.84   8.07  11.51
vp9_put_8tap_smooth_64h_neon:    6.78   9.48   4.88  10.89
vp9_put_8tap_smooth_64hv_neon:   6.99   8.87   5.94   9.56
vp9_put_8tap_smooth_64v_neon:   10.69  13.30   9.43  14.34

For the larger 8tap filters, the speedup vs C code is around 5-14x.

This is significantly faster than libvpx's implementation of the same
functions, at least when comparing the put_8tap_smooth_64 functions
(compared to vpx_convolve8_horiz_neon and vpx_convolve8_vert_neon from
libvpx).

Absolute runtimes from checkasm:
                          Cortex      A7        A8        A9       A53
vp9_put_8tap_smooth_64h_neon:    20150.3   14489.4   19733.6   10863.7
libvpx vpx_convolve8_horiz_neon: 52623.3   19736.4   21907.7   25027.7

vp9_put_8tap_smooth_64v_neon:    14455.0   12303.9   13746.4    9628.9
libvpx vpx_convolve8_vert_neon:  42090.0   17706.2   17659.9   16941.2

Thus, on the A9, the horizontal filter is only marginally faster than
libvpx, while our version is significantly faster on the other cores,
and the vertical filter is significantly faster on all cores. The
difference is especially large on the A7.

The libvpx implementation does the accumulation in 32 bit, which
probably explains most of the differences.
Signed-off-by: Martin Storsjö <martin@martin.st>

This makes it match the pattern already used for VP8 MC functions.

This also makes the signature match ffmpeg's version of these
functions, easing porting of code in both directions.
Signed-off-by: Martin Storsjö <martin@martin.st>

Also adds a new flag to mark filters which are aware of hwframes and
will perform this task themselves, and marks all appropriate filters
with this flag.

This is required to allow software-mapped hardware frames to work,
because we need to have the frames context available for any later
mapping operation in the filter graph.

The output from the filter graph should only propagate further to an
encoder if the hardware format actually matches the visible format
(mapped frames are valid here and have an hw_frames_ctx, but this
should not be given to the encoder as its hardware context).

libavformat\rtmpproto.c(1165) : warning C4702: unreachable code

libavcodec/binkdsp.c(156) : warning C4028: formal parameter 1 different from declaration

libavcodec/idctdsp.c(175) : warning C4028: formal parameter 2 different from declaration

libavcodec/aactab.h:49:1: warning: ‘extern’ is not at beginning of declaration [-Wold-style-declaration]

libavfilter/vf_drawtext.c:226:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]

It is more efficient and so preferred over allocating the buffers
manually.

The four examples (audio/video encoding/decoding) are completely
independent so it makes little sense to have them all in one file.

It is simpler and more efficient.

The four examples (audio/video encoding/decoding) are completely
independent so it makes little sense to have them all in one file.

Example usage:

avconv -i INPUT -bsf filter[=opt1=val1:opt2=val2] OUTPUT
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.

Fate tests are updated accordingly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Rotation, sample/display aspect ratio and pure matrix export.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>