D3D11 has rather fine grained per format capabilities for different uses
that can be queried at runtime. Since we don't know what the user wants
to do with the formats when av_hwdevice_get_hwframe_constraints() is
called, we simply return all formats that have the most basic support.

It was sort of optional before - if you didn't call it, networking was
initialized on demand, and an ugly warning was logged. Also, the doxygen
comments threatened that it would be made strictly required one day.

Make it explicitly optional. I would prefer to deprecate it fully, but
there might still be legitimate reasons to use this. But the average
user won't need it.

This is needed only for two reasons: to initialize TLS libraries like
OpenSSL and GnuTLS, and winsock.

OpenSSL and GnuTLS were already silently initialized on demand if the
global network init function was not called. They also have various
thread-safety acrobatics, which make concurrent initialization within
libavformat safe. In addition, the libraries are moving towards making
their global init functions safe, which removes all need for central
global init. In particular, GnuTLS 3.5.16 and OpenSSL 1.1.0g have been
found to have safe init functions. In all cases, they use internal
reference counters to avoid that the global uninit functions interfere
with concurrent uses of the library by other API users who called global
init.

winsock should be thread-safe as well, and maintains an internal
reference counter as well.

Since we still support ancient TLS libraries, which do not have this
fixed, and since it's unknown whether winsock and GnuTLS
reinitialization is costly in any way, don't deprecate the libavformat
functions yet.

Fixes: runtime error: signed integer overflow: 2146276249 + 1487583 cannot be represented in type 'int'
Fixes: 4823/clusterfuzz-testcase-minimized-4551896611160064

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: OOM
Fixes: 4810/clusterfuzz-testcase-minimized-6034253235093504

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: runtime error: signed integer overflow: 2147483520 + 128 cannot be represented in type 'int'
Fixes: 4800/clusterfuzz-testcase-minimized-6110372403609600

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

In addition, this does not allow creating frames contexts with sw_format
for which no known transfer formats exist. In theory, we should check
whether the chroma format (i.e. the sw_format) is supported at all by
the vdpau driver, but checking for transfer formats has the same effect.

Note that the pre-existing code adds 1 to priv->nb_pix_fmts[i] for
unknown reason, and some checks need to account for that to check for
empty lists. They are not off-by-one errors.

The condition was a bit too long, and most editors will break the line
and turn it into an unreadable mess. Move out some of the conditions.

This should not change the behavior.

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

dash_read_seek() is called only once to issue a seek
of *all* streams to the specified timestamp. But to
avoid reopening each stream, do a "dry run" for streams
that are in a discarded state.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

The primary goal was making it viable to play YouTube/Vimeo/... videos
using the native demuxer, since mpv currently uses a workaround in form
of Edit Decision Lists (EDL).

Implemented features:

1 Exposing id / bitrate as stream metadata (similar to the HLS demuxer)
2 Support for multiple video and audio streams
3 A few minor parts of the specification that are in use at YouTube
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

The ADTS muxer will silently (attempt to) mux any audio stream passed to it.
Patch adds a codec check.
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

Functionally identical to the old code, with less lines wasted.
Partially fixes the complete disregard for the 80 col/line guide.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

Signed-off-by: Daniil Cherednik <dan.cherednik@gmail.com>

The encoder didn't clean up if a malloc failed during init.
It also doesn't need any external tables to be initialized on init.
Finally, it didn't need to check for whether avctx->priv_data exists during
uninit.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

It tests a useless profile which sounds no better than regular aac and which
takes extremely long to encoder something. Also it has been behind experimental
flag for as long as it has been supported.
Should be removed altogether sometime in the future.

The twoloop coder sounds decent at low bitrates, however at higher bitrates
it sounds worse than the fast coder (which used to be the old twoloop coder
before October 2015) and needs quite a lot more CPU.
Change the default to fast. It has been well tested and has had little changes
over the years so its been confirmed to be quite stable.
Also change its description (not valid for more than a year) and the
documentation.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

The framerate filter was quite convoluted with some filter_frame /
request_frame logic bugs. It seemed easier to rewrite the whole filter_frame /
request_frame part and also the frame interpolation ratio calculation part in
one step.

Notable changes:
- The filter now only stores 2 frames instead of 3
- filter_frame outputs all the frames it can to be able to handle consecutive
  filter_frame calls which previously caused early drops of buffered frames.
- because of this, request_frame is largely simplified and it only outputs
  frames on flush. Previously consecuitve request_frame calls could cause the
  filter to think it is in flush mode filling its buffer with the same frames
  causing a "ghost" effect on the output.
- PTS discontinuities are handled better
- frames with unknown PTS values are now dropped

Fixes ticket #4870.
Probably fixes ticket #5493.
Signed-off-by: Marton Balint <cus@passwd.hu>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes high pitched shriek
Fixes: 25420848_1478428308873746_4255813235963330560_n.mp4
Reported-by: Dale Curtis <dalecurtis@google.com>
Reviewed-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Resulting bitstream was tested with a conformance checker
using the last draft of FFV1 specifications.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Also the files are already in the wild, and decoder support is
thus needed. And with decoders widely supporting it, there is no
advantage in not allowing it in the encoder.
The exact bitstream format may change in future versions of the
spec, if improvments are found.

Signed-off-by: Harald Gaechter <harald.gaechter@wolfvision.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

libopenmpt 0.3 deprecates openmpt_module_create_from_memory() and
provides a replacement function openmpt_module_create_from_memory2().

Detecting libopenmpt 0.3 can be done at build time via the API
version macros provided by libopenmpt. libopenmpt 0.2 did not provide
all required macros, however libopenmpt documents the required #define
shims that can be safely added for libopenmpt 0.2.

Using openmpt_module_create_from_memory2() instead of
openmpt_module_create_from_memory() avoids the deprecation warning
when building ffmpeg with libopenmpt 0.3.

openmpt_module_create_from_memory2() provides more fine-grained error
reporting and in particular allows distinguishing out-of-memory from
input file parsing errors. Return appropriate ffmpeg errors
accordingly.

libopenmpt 0.3 is ABI and API compatible with applications built
against libopenmpt 0.2. Building ffmpeg with libopenmpt 0.2 is still
supported.
Signed-off-by: Jörn Heusipp <osmanx@problemloesungsmaschine.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Jörn Heusipp <osmanx@problemloesungsmaschine.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

avcodec_free_context have handle NULL pointer case, so caller doesn't
need to check the NULL before call this function.
Signe-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

AVX-512 support has been introduced, and even if no functions currently
use zmm registers (able to load as much as 64 bytes of consecutive data
per instruction), they will be added eventually.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

Fixes a regression since 6dfcbd80.

Apple's AIFF protocol clearly states that each chucnk which is odd sized a padding should be added.
In the old version of aiffdec adding of padding was done in `get_meta`. And in case of unknown chunk name it was done in defalut case.
The new version has deleted the padding in default case and added padding adding after the switch.
But the new version didn't removed the padding adding in the `get_meta` function so in some cases padding was added twice which leaded to a bug.

Fixes: sample.aiff
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes CID #1427285.