If i is greater than 0, it is a requirement of bitstream conformance that point_y_value[ i ] is greater than point_y_value[ i - 1 ].
If i is greater than 0, it is a requirement of bitstream conformance that point_cb_value[ i ] is greater than point_cb_value[ i - 1 ].
If i is greater than 0, it is a requirement of bitstream conformance that point_cr_value[ i ] is greater than point_cr_value[ i - 1 ].
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>

Saves 2 additions.

It was renamed and no warning was given for undeffing a nonexisting one.

Required minimal changes to the code so made sense to implement.
FFT and MDCT tested, the output of both was properly rounded.
Fun fact: the non-power-of-two fixed-point FFT and MDCT are the fastest ever
non-power-of-two fixed-point FFT and MDCT written.
This can replace the power of two integer MDCTs in aac and ac3 if the
MIPS optimizations are ported across.
Unfortunately the ac3 encoder uses a 16-bit fixed point forward transform,
unlike the encoder which uses a 32bit inverse transform, so some modifications
might be required there.

The 3-point FFT is somewhat less accurate than it otherwise could be,
having minor rounding errors with bigger transforms. However, this
could be improved later, and the way its currently written is the way one
would write assembly for it.
Similar rounding errors can also be found throughout the power of two FFTs
as well, though those are more difficult to correct.
Despite this, the integer transforms are more than accurate enough.

FMO is not supported and fields related to FMO are not parsed, meaning
that any fields which follow will be corrupt.
Signed-off-by: James Almer <jamrial@gmail.com>

For audio packets with dts != AV_NOPTS_VALUEs the dts was converted
twice to the muxer's timebase during streamcopy, once as a normal
packet and once specifically as an audio packet. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: left shift of negative value -463
Fixes: 20542/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APE_fuzzer-5688714435231744

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Compared to ad-hoc if(printed) ... code this allows the user to disable
it by adjusting the log level
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

When e2_pts == INT64_MIN and e1_pts >= 0 the calculation of
e2_pts - e1_pts will overflow an int64_t.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

In order for rate control to correctly allocate bitrate to each temporal
layer, correct temporal layer id has to be set to each frame. This
commit provides the ability to set correct temporal layer id for each
frame.
Signed-off-by: James Zern <jzern@google.com>

Previously, it was always left in the automatic mode, if the option
was set to the only special (negative) value. Now there's two separate
special values for this option, -1 for automatic (metadata based)
and -2 for explicitly disabled.
Signed-off-by: Martin Storsjö <martin@martin.st>

It was disabled by default in 2dbd35b0
as it added delay, but now we compensate for the delay properly
by offsetting timestamps.
Signed-off-by: Martin Storsjö <martin@martin.st>

The delay is normally zero when the level limiter is disabled,
but if enabled, there's a small delay.
Signed-off-by: Martin Storsjö <martin@martin.st>

The AVPacket destined for a demuxer's output has already been
initialized before it reaches the demuxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>

Even in this scenario, the frame still contains references to data that
won't be freed if the frame isn't unreferenced. And the AVFrame itself
will leak, too.

Fixes Coverity issue #1441422.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Since bae8844e the packet will always be unreferenced when a demuxer
returns an error, so that a lot of calls to av_packet_unref() in lots of
demuxers are now redundant and can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>

Tested using this command:
/ffmpeg -pix_fmt yuv420p -s 1920*1080 -i ArashRawYuv420.yuv \
-vcodec rawvideo -s 1920*1080 -pix_fmt rgb24 -f null /dev/null

The fps increase from 389 to 640 on Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz
Signed-off-by: Ting Fu <ting.fu@intel.com>

This is possible because the size of a scan header is always a multiple
of a byte.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

They are spec-incompliant.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: signed integer overflow: -2147479324 + -32568 cannot be represented in type 'int'
Fixes: 20103/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_GREMLIN_DPCM_fuzzer-5667667579240448

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: signed integer overflow: -53716100 * 256 cannot be represented in type 'int'
Fixes: 20143/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMALOSSLESS_fuzzer-5716604000403456

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: out of array read
Fixes: 20059/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMALOSSLESS_fuzzer-5691776237305856

No testcase except the fuzzed one.

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: timeout (252sec -> 170msec)
Fixes: 20023/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MVHA_fuzzer-5681192565473280

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: out of array access
Fixes: 19892/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AGM_fuzzer-5707525924323328

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Bug #8255 points out a double free error in libwscale/utils.c file.
The double free is because the pointer to cascaded_context of an
sw_context is not set to NULL after freeing it. When the sw_context
is later freed, sws_freeContext is called on the cascaded_context,
causing a double free.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: Timeout (270sec -> 25ms)
Fixes: 20485/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AGM_fuzzer-5636954207289344

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>