In particular for 10 and 12 bits.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This makes it easier to see where a failure happens
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

On 12 frames of a 444p 12 bits DNxHR sequence, _put function:
C:         78902 decicycles in idct,  262071 runs,     73 skips
avx:       32478 decicycles in idct,  262045 runs,     99 skips

Difference between the 2:
stddev:    0.39 PSNR:104.47 MAXDIFF:    2

This is unavoidable and due to the scale factors used in the x86
version, which cannot match the C ones.

In addition, the trick of adding an initial bias to the input of a
pass can overflow, as the input coefficients are already 15bits,
which is the maximum this function can handle.

Overall, however, the omse on 12 bits samples goes from 0.16916 to
0.16883. Reducing rowshift by 1 improves to 0.0908, but causes
overflows.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Modeled from the prores version. Clips to [0;1023] and is bitexact.
Bitexactness requires to add offsets in different places compared to
prores or C, and makes the function approximately 2% slower.

For 16 frames of a DNxHD 4:2:2 10bits test sequence:

C:    60861 decicycles in idct, 1048205 runs,    371 skips
sse2: 27567 decicycles in idct, 1048216 runs,    360 skips
avx:  26272 decicycles in idct, 1048171 runs,    405 skips

The add version is not implemented, so the corresponding dsp
function is set to NULL to make it clear in a code executing it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

When the input of a pass has 15 or 16 bits of precision (in particular
the column pass), the addition of a bias to W4 may lead to overflows
in the input to pmaddwd.

This requires postponing the adding of the bias to after the first
butterfly. To do so, the fact that m15, unused although zeroed, is
exploited. In case the pass is safe, an address can be directly used,
and the number of xmm regs can be decreased. Otherwise, the 32bits bias
is loaded into it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

It was useful to (accidentally?) spot an overflow in the column pass
of the x86 simple_idct10 implementation.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

omse goes from 0.03060703 (which fails for dct-test) to 0.01663750.
This also actually improve the error of decoding the sample generated
by fate-vsynth3-dnxhd1080i-10bit using simple_idct10 to FAANI, which
goes (when resampled to yuv422p) from:
stddev:    0.06 PSNR: 72.28 MAXDIFF:    1
to identical.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

This should be reused for a generic simple_idct10 function.
Requires a bit of trickery to declare common constants in C.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

To keep it similar to the other functions which are all named *_pred.

Left out of last commit which added support for eight channel audio.

Dequant or encoding were trying to reverse a scan that hadn't been
applied...
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>

Includes escapes that should now be supported and a few features not yet
fully supported, like comments, regions, classes, ruby, and lang.

All were tested with https://quuz.org/webvtt/ for validation, except
regions because the validator doesn't support them yet, and I couldn't
find any other way to validate WebVTT.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>

Bare ampersand characters are still accepted, even though out-of-spec.
Also fixes adjacent tags not being parsed.

Fixes trac #4915
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>

Signed-off-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

Fails on SunOS and old GCC (<=4.6 is ancient) versions.

This commit adds the ability for a profile to set the default
options, as well as for the user to override such options
by simply stating them in the command line while still keeping
the same profile, as long as those options are still permitted by
the profile.

Example: setting the profile to aac_low (the default) will turn
PNS and IS on. They can be disabled by -aac_pns 0 and -aac_is 0,
respectively. Turning on -aac_pred 1 will cause the profile to be
elevated to aac_main, as long as no options forbidding aac_main
have been entered (like AAC-LTP, which will be pushed soon).

A useful feature is that by setting the profile to mpeg2_aac_low,
all MPEG4 features will be disabled and if the user tries to enable
them then the program will exit with an error. This profile is
signalled with the same bitstream as aac_low (MPEG4) but some devices
and decoders will fail if any MPEG4 features have been enabled.

Signed-off-by: Alex Agranovsky <alex@sighthound.com>

It makes possible to put multiple stream specifier into the select
option separated by comma.
eg. select=\'a:0,v\'
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Nicolas George <george@nsup.org>

This commit implements support for 7.1 channel audio. There's no
more predefined bitstream channel mappings so going beyond 8 channels
(and 7 channels exactly) will require programmable channel elements,
which is already underway.

Two guesses as to which file was used as boilerplate.

The bulk of calls to quantize_band_cost are replaced
by a call to a version that memoizes, greatly improving
performance, since during coefficient search there is
a great deal of repeat work.

Memoization cannot always be applied, so do this in a
different function, and leave the original as-is.

The 2nd size value is wrong for the sample file

Fixes: Ticket4903
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Intermediate results can indeed violate SF delta. Instead of asserting
there, just make the code safe, and assert on the final result.

Also re-clamp SFs more often in short windows (which tend to violate
the restriction when encoding the switch from one window to the other)

Seems it was forgotten.

Found-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

It was merged with the iff_ilbm decoder in commit
929a24ef.

Define AV_CODEC_ID_IFF_BYTERUN1 as AV_CODEC_ID_IFF_ILBM for API
compatibility.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

No change in fuctionality.
Signed-off-by: Marton Balint <cus@passwd.hu>

To avoid race conditions.
Signed-off-by: Marton Balint <cus@passwd.hu>

It's a non-installed header and only used in one place (flacenc).
Since ff_ctz is static inline, it's fine to use that instead.

MIPS needs more fuzz