Reason: For some cases, such as 2 or more graphics cards existing, the
default command line may fail because ffmpeg does not open the correct
device node:
    ffmpeg -hwaccel qsv -c:v h264_qsv -i test.264 -c:v h264_qsv out.264
Let user choose the proper one by running like below:
    ffmpeg -hwaccel qsv -qsv_device /dev/dri/renderD128 -c:v h264_qsv \
-i test.264 -c:v h264_qsv out.264
Signed-off-by: ChaoX A Liu <chaox.a.liu@gmail.com>
Signed-off-by: Huang, Zhengxu <zhengxu.maxwell@gmail.com>
Signed-off-by: Andrew, Zhang <huazh407@gmail.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>

Fixes ticket #6072.

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>

This decoder can decode all existing SpeedHQ formats (SHQ0–5, 7, and 9),
including correct decoding of the alpha channel.

1080p is decoded in 142 fps on one core of my i7-4600U (2.1 GHz Haswell),
about evenly split between bitstream reader and IDCT. There is currently
no attempt at slice or frame threading, even though the format trivially
supports both.

NewTek very helpfully provided a full set of SHQ samples, as well as
source code for an SHQ2 encoder (not included) and assistance with
understanding some details of the format.

Allows more codecs than mpeg12video to make use of it.

Mainly useful for supporting decoding of headerless files.
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

CID: 1324298
add a label when error goto the label to release resource
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Fixes ticket #6044

Based on patch by Carl Eugen Hoyos

This is what gimp, ImageMagick and FreeImage do and what the
Adobe Photoshop file format specification suggests.
Fixes a sample from ticket #6045.

Reviewed-by: Martin Vignali

when the segments largest duration value is look like 4.000000, the
EXT-X-TARGETDURATION value should equ 4.
it's wrong when hlsenc use ceil, so fix it.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

 problem

fix ticket: #6067

Tested-by: Pero
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

cid: 1396268
when av_strdup(str) error, the lst need release
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

This should make no difference as the value should not be able to be that large
but its more correct this way

Fixes CID1348138
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Default is "bicubic".
Signed-off-by: Lou Logan <lou@lrcd.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

When allocating stack space with an alignment requirement that is larger
than the current stack alignment we need to store a copy of the original
stack pointer in order to be able to restore it later.

If we chose to use another register for this purpose we should not pick
eax/rax since it can be overwritten as a return value.

clock_gettime is avalible since macOS 10.12 and iOS 10.0. Because of
weak linking, clock_gettime can be build without error with new
macOS/iOS sdk, but the symbol may not exist on the target system.
Explicitly checking the symbol is required.
https://developer.apple.com/library/content/documentation/MacOSX/Conceptual/BPFrameworks/Concepts/WeakLinking.htmlSigned-off-by: Wang Bin <wbsecg1@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Disable B frames when using baseline/constrained baseline profile,
following H.264 spec Annex A.2.1.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Yi A Wang <yi.a.wang@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>

The only thing we can do at such point is return samples unchanged.
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Negate null check
Fixes CID1396248
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes CID1396849
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

When the command line for children is created, it is assumed that
my_program_name always ends with "ffserver", which doesn't have to
be true if ffserver is called through a symbolic link.

In such a case, it could be that not enough space for "ffmpeg" is
available at the end, leading to a buffer overflow.

One example would be:

$ ln -s /usr/bin/ffserver ~/f; ~/f

As this is only a local buffer overflow, i.e. is based on a weird
program call, this has NO security impact.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Newer version of encoder can create such files.
Signed-off-by: Paul B Mahol <onemda@gmail.com>

Fixes ticket #6063.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

The following three commits created a regression by writing initially
invalid mkv headers:

650e17d8 avformat/matroskaenc: write a
CRC32 element on Tags
3bcadf82 avformat/matroskaenc: write a
CRC32 element on Info
ee888cfb avformat/matroskaenc: postpone
writing the Tracks master

Symptoms:

- You can no longer playback a file that is still processed by ffmpeg,
e.g. VLC fails playback
- You can no longer stream a file to a client while if is still being
processed
- Various diagnosing tools show header errors or incomplete headers
(e.g. ffprobe, mediainfo, mkvalidator)

Note: The symptoms do not apply to completed files or ffmpeg runs that
were interrupted with 'q'

Cause:

The mentioned commits made changes in a way that some header elements
are only partially written in
mkv_write_header, leaving the header in an invalid state. Only in
mkv_write_trailer, these elements
are finished correctly, but that does only occur at the end of the
process.

Regression:

Before these commits were applied, mkv headers have always been valid,
even before completion of ffmpeg.
This has worked reliably over many versions of ffmpeg, to it was an
obvious regression.

Bugtracker:

This issue has been recorded as #5977 which is resolved by this patch

Patch:

The patch adds a new function 'end_ebml_master_crc32_preliminary' that
preliminarily finishes the ebml
element without destroying the buffer. The buffer can be used to update
the ebml element later during
mkv_write_trailer. But most important: mkv_write_header finishes with a
valid mkv header again.
Signed-off-by: James Almer <jamrial@gmail.com>

This commit adds the avio_get_dyn_buf function which allows accessing
the
content of a DynBuffer without destroying it.

This is required in matroskaenc for preliminary writing (correct) mkv
headers.

Context for this change is fixing regression bug #5977.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

looks like there is a bug in commit
1a08758e relating to the handling of
ptr in decode_frame after decode_block is called, before this commit
ptr would have been incremented for each line in the data window, now
after the commit it is left at the start of the first included line
rather than the line after the data window then the code sets the
remaining lines to 0 and thus the whole image is over written.

Fix by adjusting ptr to the correct line after decode_block returns
Signed-off-by: Kevin Wheatley <kevin.j.wheatley@gmail.com>

Fixes CID1244189
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

CID: 1396257
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

This commit replaces the current inefficient non-power-of-two FFT with a
much faster FFT based on the Prime Factor Algorithm.
Although it is already much faster than the old algorithm without SIMD,
the new algorithm makes use of the already very throughouly SIMD'd power
of two FFT, which improves performance even more across all platforms
which we have SIMD support for.

Most of the work was done by Peter Barfuss, who passed the code to me to
implement into the iMDCT and the current codebase. The code for a
5-point and 15-point FFT was derived from the previous implementation,
although it was optimized and simplified, which will make its future
SIMD easier. The 15-point FFT is currently using 6% of the current
overall decoder overhead.

The FFT can now easily be used as a forward transform by simply not
multiplying the 5-point FFT's imaginary component by -1 (which comes
from the fact that changing the complex exponential's angle by -1 also
changes the output by that) and by multiplying the "theta" angle of the
main exptab by -1. Hence the deliberately left multiplication by -1 at
the end.

FATE passes, and performance reports on other platforms/CPUs are
welcome.

Performance comparisons:

iMDCT, PFA:
101127 decicycles in speed,   32765 runs,      3 skips
iMDCT, Old:
211022 decicycles in speed,   32768 runs,      0 skips

Standalone FFT, 300000 transforms of size 960:
    PFA        Old FFT     kiss_fft    libfftw3f
    3.659695s, 15.726912s, 13.300789s, 1.182222s

Being only 3x slower than libfftw3f is a big achievement by itself.

There appears to be something capping the performance in the iMDCT side
of things, possibly during the pre-stage reindexing. However, it is
certainly fast enough for now.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

Prep work for the next commit, which will add a new FFT algorithm
which makes the iMDCT over 3x faster than it is currently (standalone,
the FFT is with some framesizes over 10x faster).

The new FFT algorithm uses the already thouroughly SIMD'd power of two
FFT which already has SIMD for AArch64, so users of that platform will
still see an improvement.

The previous FFT+SIMD was barely 2.5x faster than the C versions on these
platforms.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

CID: 1398228
Passing null pointer dirname to strlen, which dereferences it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>