This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).

Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

The functions moved are used when decoding h264.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Also add support for these formats in libswscale.

Needed for high bit depth h264 decoding.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Needed for high bit depth h264 decoding.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>

Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Signed-off-by: Anton Khirnov <anton@khirnov.net>

Check that the value passed for an OPT_INT option is an int, fail
otherwise.
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Mostly useful for the audio-filters branch, to make more apparent the
distinction between configure_audio_filters() and
configure_video_filters().
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Signed-off-by: Anton Khirnov <anton@khirnov.net>

The function was only used in opt_sample_fmt() for listing the sample
formats. Move list_fmts() functionality directly into
opt_sample_fmt().

Also fix the warning:
ffmpeg.c: In function ‘opt_audio_sample_fmt’:
ffmpeg.c:2877: warning: passing argument 1 of ‘list_fmts’ from incompatible pointer type
cmdutils.h:163: note: expected ‘void (*)(char *, int,  int)’ but argument is of type ‘char * (*)(char *, int,  enum AVSampleFormat)’
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Fix configure --disable-avfilter issue.
Signed-off-by: Anton Khirnov <anton@khirnov.net>

Signed-off-by: Mans Rullgard <mans@mansr.com>

Signed-off-by: Mans Rullgard <mans@mansr.com>

This is consistent with how all the other options work.

The low quality mode is off by default and never tested.  The high
quality mode is also plenty fast enough.
Signed-off-by: Mans Rullgard <mans@mansr.com>

If not cleared, the caller might try to free it.
Signed-off-by: Martin Storsjö <martin@martin.st>

Earlier, AVIO_RDWR was handled as READ, and all the checks
for the AVIO_WRONLY flag explicitly meant the write-only case.
When changed from old AVIO/URL contants to AVIO_FLAG in
59d96941, these comparisons were updated incorrectly, by
mapping checks for AVIO_WRONLY to checks for AVIO_FLAG_WRITE.

When receiving RTP over UDP, the urlcontext is opened with
READ_WRITE flags.

This patch updates the flag comparisons to check for the same
conditions as the code did prior to 59d96941.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

This adds $DEC_OPTS to the wma decode commands, making tests pass
on systems where the bitexact flag is needed.
Signed-off-by: Mans Rullgard <mans@mansr.com>

This fake option cannot be enabled by normal means, and the
floating-point decoder should provide the higher quality this
option presumably was intended for.
Signed-off-by: Mans Rullgard <mans@mansr.com>

This separates encoding and decoding flags, and passes them together
with the related file argument instead of all at the start of the
command line.
Signed-off-by: Mans Rullgard <mans@mansr.com>

Instead use the function pointers directly.

Signed-off-by: Mans Rullgard <mans@mansr.com>