If using the winstore compat library, a fallback LoadLibrary
function does exist, that only calls LoadPackagedLibrary though
(which doesn't work for dynamically loading d3d11 DLLs).

Therefore explicitly check the targeted API family instead.

Make this check a reusable HAVE_* component which other parts
of the libraries can check when necessary as well.
Signed-off-by: Martin Storsjö <martin@martin.st>

Currently, the tags enforced and set on the segmenter muxer level
mismatch what the mp4/ismv muxer uses (since 713efb2c).

Skip the codec_tag altogether here, to let the user (try to) set
whichever codec/tag is preferred; the individual chained muxer will
reject invalid codecs anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>

The use of this SEI is for backward compatibility in HLG HDR systems:
older devices that cannot interpret the "arib-std-b67" transfer will
get the compatible transfer (usually bt709 or bt2020) from the VUI,
while newer devices that can interpret HDR will read the SEI and use
its value instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

This fixes a segfault (originally found in Movian, but traced to libav)
when decoding subtitles because only an array of rects is allocated,
but not the actual structs it contains. The issue was probably
introduced in commit 23833236 where the loop to allocate the rects in
the array was thrown away.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>

Hardware accelerated decoding generally uses AVHWFramesContext for pool
allocation of hardware surfaces. These are setup to allocate surfaces
aligned to hardware and hwaccel API requirements. Due to the
architecture, av_hwframe_get_buffer() will return AVFrames with
the dimensions set to the aligned sizes.

This causes some decoders (like hevc) return these aligned size as
final frame size, instead of cropping them to the video's actual
dimensions. To make sure this doesn't happen, crop the frame to the
size the decoder expects when ff_get_buffer() is called.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Helpful for debugging.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Basically copied from VLC (LGPL):

http://git.videolan.org/?p=vlc.git;a=blob;f=modules/video_output/win32/direct3d11.c;h=e9fcb83dcabfe778f26e63d19f218caf06a7c3ae;hb=HEAD#l1482
http://git.videolan.org/?p=vlc.git;a=blob;f=modules/codec/avcodec/d3d11va.c;h=85e7d25caebc059a9770da2ef4bb8fe90816d76d;hb=HEAD#l599Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Some devices (some phones, apparently) will support only this opaque
format. Of course this won't work with CLI, because copying data
directly is not supported.

Automatic frame allocation (setting AVCodecContext.hw_device_ctx) does
not support this mode, even if it's the only supported mode. But since
opaque surfaces are generally less useful, that's probably ok.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Makes dealing with formats that can not be used for staging textures
easier (DXGI_FORMAT_420_OPAQUE). It also saves memory if the staging
texture is never needed, so this is a good thing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

It appears in this case, frames_ininit is called twice (once by
av_hwframe_ctx_init(), and again by unreffing the frames ctx ref).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Some existed since forever, some are new.

The cast in get_surface() is silly, but unless we change the av_log
function signature, or all callers of ff_dxva2_get_surface_index(), it's
needed to remove the const warning.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

Make supported codec profiles part of each dxva_modes entry. Every DXVA2
mode is representative for a codec with a subset of supported profiles,
so reflecting that in dxva_modes seems appropriate.

In practice, this will more strictly check MPEG2 profiles, will stop
relying on the surface format checks for selecting the correct HEVC
profile, and remove the verbose messages for mismatching H264/HEVC
profiles. Instead of the latter, it will now print the more nebulous "No
decoder device for codec found" verbose message.

This also respects AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH. Move the
Main10 HEVC entry before the normal one to make this work better.

Originally inspired by VLC's code.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>

These variables might be set from a previous probe run, but one or the
other program that is probed for may not grok the flags, resulting in
errors during assembling when the values of those variables are passed
to the assembler.

The previous default sets the allocated surfaces to 32 unless it is
user-overridden or the lookahead parameter is set.

Change the surfaces calculation for default, B-frames and lookahead scenario.

Previously, if a session allocates x surfaces, only x-1 surfaces are
used (due to combination of output delay and lock toggle logic).

Also employ this mechanism to pass $libdir to the runtime library search
path if rpath is enabled. This fixes underlinking of some test binaries
on some systems.

Check the existing flags in the cc/cflags/cppflags/ldflags for
occurrances of -isysroot; if none is found but --sysroot was specified,
set -isysroot to the same value as --sysroot.

This simplifies configuring cross-builds for iOS, if the global
environment variable SDKROOT isn't set.
Signed-off-by: Martin Storsjö <martin@martin.st>

Fixes several warnings of the type:
libavfilter/af_bs2b.c:171:22: warning: assignment from incompatible pointer type

The rtmp protocol uses nonblocking reads, to poll for incoming
messages from the server while publishing a stream.

Prior to 94599a6d and
d13b124e, the tls protocol
handled the nonblocking flag, mostly as a side effect from not
using custom IO callbacks for reading from the socket. When custom
IO callbacks were taken into use in
d15eec4d, the handling of a nonblocking
socket wasn't necessary for the default blocking mode any longer.

The code was simplified, since it was overlooked that other code
within libavformat actually used the tls protocol in nonblocking mode.

This fixes publishing over rtmps, with the gnutls backend.
Signed-off-by: Martin Storsjö <martin@martin.st>

The rtmp protocol uses nonblocking reads, to poll for incoming
messages from the server while publishing a stream.

Prior to 94599a6d and
d13b124e, the tls protocol
handled the nonblocking flag, mostly as a side effect from not
using custom IO callbacks for reading from the socket. When custom
IO callbacks were taken into use in
d15eec4d, the handling of a nonblocking
socket wasn't necessary for the default blocking mode any longer.

The code was simplified, since it was overlooked that other code
within libavformat actually used the tls protocol in nonblocking mode.

This fixes publishing over rtmps, with the openssl backend.
Signed-off-by: Martin Storsjö <martin@martin.st>

If AVCodecParameters.codec_tag is 'hvc1' use it instead of 'hev1' for
h.265 streams. QuickTime (and other Apple software) requires 'hvc1'.

mux.c init_muxer() already sets codec_tag correctly in the cases
simplified here.

This also adds the capability to support alternative tags for the
same codec_id.

ff_mp4_obj_type contains the wrong type of tags for
AVOutputFormat.codec_tag. AVOutputFormat.codec_tag is used to
validate AVCodecParameters.codec_tag so needs to be the same
type of tag.

Creates new tag lists for mp4 and ismv.  New tag lists support
same list of codecs found in ff_mp4_obj_type. psp uses the same
tag list as mp4 since these both use mp4_get_codec_tag to look up tags.

Properly use the b.eq/b.ge forms instead of the nonstandard forms
(which both gas and newer clang accept though), and expand the
register list that used a range (which the Xcode 6.2 clang, based
on clang 3.5 svn, didn't support).
Signed-off-by: Martin Storsjö <martin@martin.st>

Windows does not like symlinks and README.md is pretty common nowadays.

When targeting the UWP API subset, the LoadLibrary function is not
available (and the fallback, LoadPackagedLibrary, can't be used to
load system DLLs). In these cases, link directly to the functions
in the DLLs instead of trying to load them dynamically at runtime.
Signed-off-by: Martin Storsjö <martin@martin.st>

The handling of _select dependencies had two issues:

1) extralibs from _select dependencies of a component were not added to
   the list of extralibs for that component.
2) extralibs from dependencies were only added to the extralibs of a
   component if the component was enabled. This led to incorrect results
   if that component was enabled by another component later in the dependency
   resolution process. Instead, always generate the full list of component
   extralibs for use later in the dependency resolution process.

Also remove a leftover unused variable.

This ensures that mmx_internal is only ever enabled on x86.