This allows globally forcing specific cpuflags (or lack thereof)
Useful for debugging and benchmarking
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* shariman/wmall:
  Perform inter-channel decorr. only if both channels are coded
  Use fixed-length array in revert_mclms()
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

This way the size that is calculated is known and can be used in a following
commit.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

This zeros all the memory once and avoids valgrind warnings.
alternatively the warnings could be suppressed.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* qatar/master:
  mov: Use defines for sample flags in fragments
  mov: Use defines for trun flags
  mov: Use defines for tfhd flags
  proresenc: force bitrate not to exceed given limit
  vc1parse: call vc1_init_common().
  wma: don't return 0 on invalid packets.
  asf: prevent packet_size_left from going negative if hdrlen > pktlen.
  mjpegb: don't return 0 at the end of frame decoding.
  rtpdec: Identify incorrectly signalled H263
  vp8dsp: split long line.
  aiff: don't skip block_align==0 check on COMM-after-SSND files.
  dpcm: ignore extra unpaired bytes in stereo streams.
  mp3on4: require a minimum framesize.
  mpc7: assign an error level + context to av_log() msg.
  huffyuv: error out on bit overrun.
  dct-test: Add the missing ff_ prefix to the altivec functions
  dct-test: Remove a stray declaration of a nonexistent function
  movenc: Write the unknown duration as 64 bit fields in ismv
  movenc: Write track durations with all bits set if duration is unknown

Conflicts:
	libavcodec/dct-test.c
	libavcodec/wmadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

-idct simple for some reason results in different results on
different systems.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Print whether it was a keyframe or a non-keyframe that
was incorrectly marked as the other.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

Apple ProRes Format Specifications mentions target data size for every frame,
so make sure frame meets it. This also allows encoder to demand much smaller
packet sizes for output.

The parser uses VLC tables initialized in vc1_common_init(), therefore
we should call this function on parser init also.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Return 0 means "please return the same data again", i.e. it causes an
infinite loop. Instead, return an error.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

This prevents failed assertions further down in the packet processing
where we require non-negative values for packet_size_left.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

Return 0 indicates "please return the same data again", i.e. it causes
an infinite loop. Instead, return that we consumed the buffer if we
finished decoding succesfully, or return an error if an error occurred.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org

This should test muxing Theora into Ogg.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

H263 in RTP can be packetized in two formats (RFC 2190, RFC
2429/4629). The former normally uses the static payload type 34,
while the latter normally uses dynamic payload types with the
SDP format names H263-1998 or H263-2000.

Look for packets that don't look like proper RFC 2190 packets and
switch to depacketizing them according to the new format if they
match some heuristic criteria.
Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

In order to match Linux behaviour better our
Windows-specific open() replacement should disable
Windows default file locking.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

This needs the extradata to be extracted.
The approach used is the one MPlayer uses, though it is
unclear whether the 4 bytes extradata that are skipped
should be skipped always or only for AAC.
The AAC parser must be disabled, too, otherwise playback
still does not work.
Fixes trac issue #547.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>

Fix regression introduced in commit 70ffda32.

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* qatar/master: (22 commits)
  als: prevent infinite loop in zero_remaining().
  cook: prevent div-by-zero if channels is zero.
  pamenc: switch to encode2().
  svq1enc: switch to encode2().
  dvenc: switch to encode2().
  dpxenc: switch to encode2().
  pngenc: switch to encode2().
  v210enc: switch to encode2().
  xwdenc: switch to encode2().
  ttadec: use branchless unsigned-to-signed unfolding
  avcodec: add a Sun Rasterfile encoder
  sunrast: Move common defines to a new header file.
  cdxl: fix video decoding for some files
  cdxl: fix audio for some samples
  apetag: add proper support for binary tags
  ttadec: remove dead code
  swscale: make access to filter data conditional on filter type.
  swscale: update context offsets after removal of AlpMmxFilter.
  prores: initialise encoder and decoder parts only when needed
  swscale: make monowhite/black RGB-independent.
  ...

Conflicts:
	Changelog
	libavcodec/alsdec.c
	libavcodec/dpxenc.c
	libavcodec/golomb.h
	libavcodec/pamenc.c
	libavcodec/pngenc.c
	libavformat/img2.c
	libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Martin Storsjö <martin@martin.st>

This prevents SIGFPEs when using block_align for divisions.

Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org