Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* commit '7e18a727':
  arm: cosmetics: Consistently use lowercase for shift operators
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'fe67f3fb':
  arm: cosmetics: Fix a misaligned asm operand
Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: Martin Storsjö <martin@martin.st>

Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* commit '5a272190':
  armv6: Accelerate butterflies_float

See: 57641410Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '5edad2c4':
  armv6: Accelerate vector_fmul_window

See: 649c6661Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '87552d54':
  armv6: Accelerate ff_fft_calc for general case (nbits != 4)
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit '5c22e8e4':
  armv6: Accelerate ff_imdct_half for general case (mdct_bits != 6)

See: 42c1cc35Merged-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in butterflies_float_c() / ff_butterflies_float_vfp() for the
same sample AAC stream:

                   Before          After
                   Mean   StdDev   Mean   StdDev  Confidence  Change
Audio decode       1542.8 43.7     1470.5 41.5    100.0%      +4.9%
butterflies_float  130.0  11.9     70.2   12.1    100.0%      +85.2%
Signed-off-by: Martin Storsjö <martin@martin.st>

I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in vector_fmul_window_c() / ff_vector_fmul_window_vfp() for the
same sample AAC stream:

                    Before          After
                    Mean   StdDev   Mean   StdDev  Confidence  Change
Audio decode        1598.2 47.4     1529.2 25.4    100.0%      +4.5%
vector_fmul_window  244.0  22.1     188.9  22.3    100.0%      +29.2%
Signed-off-by: Martin Storsjö <martin@martin.st>

The previous implementation targeted DTS Coherent Acoustics, which only
requires nbits == 4 (fft16()). This case was (and still is) linked directly
rather than being indirected through ff_fft_calc_vfp(), but now the full
range from radix-4 up to radix-65536 is available. This benefits other codecs
such as AAC and AC3.

The implementaion is based upon the C version, with each routine larger than
radix-16 calling a hierarchy of smaller FFT functions, then performing a
post-processing pass. This pass benefits a lot from loop unrolling to
counter the long pipelines in the VFP. A relaxed calling standard also
reduces the overhead of the call hierarchy, and avoiding the excessive
inlining performed by GCC probably helps with I-cache utilisation too.

I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in the FFT routines (fft4() to fft512() and pass()) for the
same sample AAC stream:

              Before          After
              Mean   StdDev   Mean   StdDev  Confidence  Change
Audio decode  2245.5 53.1     1599.6 43.8    100.0%      +40.4%
FFT routines  940.6  22.0     348.1  20.8    100.0%      +170.2%
Signed-off-by: Martin Storsjö <martin@martin.st>

The previous implementation targeted DTS Coherent Acoustics, which only
requires mdct_bits == 6. This relatively small size lent itself to
unrolling the loops a small number of times, and encoding offsets
calculated at assembly time within the load/store instructions of each
iteration.

In the more general case (codecs such as AAC and AC3) much larger arrays
are used - mdct_bits == [8, 9, 11]. The old method does not scale for
these cases, so more integer registers are used with non-unrolled versions
of the loops (and with some stack spillage). The postrotation filter loop
is still unrolled by a factor of 2 to permit the double-buffering of some
VFP registers to facilitate overlap of neighbouring iterations.

I benchmarked the result by measuring the number of gperftools samples
that hit anywhere in the AAC decoder (starting from aac_decode_frame())
or specifically in ff_imdct_half_c / ff_imdct_half_vfp, for the same
example AAC stream:

                  Before          After
                  Mean   StdDev   Mean   StdDev  Confidence  Change
aac_decode_frame  2368.1 35.8     2117.2 35.3    100.0%      +11.8%
ff_imdct_half_*   457.5  22.4     251.2  16.2    100.0%      +82.1%
Signed-off-by: Martin Storsjö <martin@martin.st>

These where removed by libav in

See: git show -C 2d604443
diff --git a/libavcodec/dsputil.c b/libavcodec/me_cmp.c
similarity index 98%
rename from libavcodec/dsputil.c
rename to libavcodec/me_cmp.c
index ba71a99..9fcc937 100644
--- a/libavcodec/dsputil.c
+++ b/libavcodec/me_cmp.c
@@ -1,8 +1,4 @@
 /*
- * DSP utils
- * Copyright (c) 2000, 2001 Fabrice Bellard
- * Copyright (c) 2002-2004 Michael Niedermayer <michaelni@gmx.at>
- *
  * This file is part of Libav.
  *
  * Libav is free software; you can redistribute it and/or
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

* commit '2d604443':
  dsputil: Split motion estimation compare bits off into their own context

Conflicts:
	configure
	libavcodec/Makefile
	libavcodec/arm/Makefile
	libavcodec/dvenc.c
	libavcodec/error_resilience.c
	libavcodec/h264.h
	libavcodec/h264_slice.c
	libavcodec/me_cmp.c
	libavcodec/me_cmp.h
	libavcodec/motion_est.c
	libavcodec/motion_est_template.c
	libavcodec/mpeg4videoenc.c
	libavcodec/mpegvideo.c
	libavcodec/mpegvideo_enc.c
	libavcodec/x86/Makefile
	libavcodec/x86/me_cmp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'a578b040':
  configure: Assume runtime cpu detection on arm on --target-os=android as well
Merged-by: Michael Niedermayer <michaelni@gmx.at>

* commit 'c23ce454':
  x86: dsputil: Coalesce all init files

Conflicts:
	libavcodec/x86/dsputil_init.c
	libavcodec/x86/dsputil_x86.h
	libavcodec/x86/motion_est.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>

When merging the formats around the automatically inserted
convert filters, the refcount of the format lists can not be 0.
Coverity does not detect it, and suspects a memory leak,
because if refcount is 0 the newly allocated lists are not
stored anywhere. That gives CIDs 1224282, 1224283 and 1224284.
Lists with refcount 0 are used in can_merge_formats(), so the
asserts can not be moved inside the merge functions.

With remote displays supporting the MIT-SHM extension,
the extension is detected and used, but attaching fails
asynchronously.

The X11 servers by VNC, at 32-bits depths, has the following masks:
R:0x000007ff G:0x003ff800 B:0xffc00000
This is not compatible with AV_PIX_FMT_0RGB32, and the result
is success with completely wrong colors.

Fix a segfault if the XFixes extension is not available on
the X11 server.
Can be reproduced using the VNC server.

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>

Avoid negative durations in case there is a single packet in the current
segment, since in that case the end time is still set to the previous
segment end time.

This avoids a systematic overestimate of the segments duration when there
are several streams.

Fix trac ticket #3724.