slightly improved speed
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>

Provides a way to change bandwidth parameter inside DASH manifest after a non-CBR H.264 encoding.
Caller now is able to compute the bitrate by itself, after all packets have been written, and then set that value in AVFormatContext->streams->codecpar->bit_rate before calling av_write_trailer. As a result that value will be set in DASH manifest.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

the temp_file hls_flags describe text offset is wrong, now move it after example
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

This matches the order they are in the 16 bpp version.

There they are in this order, to make sure we access them in the
same order they are declared, easing loading only half of the
coefficients at a time.

This makes the 8 bpp version match the 16 bpp version better.

This is cherrypicked from libav commit
b8f66c08.
Signed-off-by: Martin Storsjö <martin@martin.st>

This matches the order they are in the 16 bpp version.

There they are in this order, to make sure we access them in the
same order they are declared, easing loading only half of the
coefficients at a time.

This makes the 8 bpp version match the 16 bpp version better.

This is cherrypicked from libav commit
08074c09.
Signed-off-by: Martin Storsjö <martin@martin.st>

All elements are used pairwise, except for the first one.
Previously, the 16th element was unused. Move the unused element
to the second slot, to make the later element pairs not split
across registers.

This simplifies loading only parts of the coefficients,
reducing the difference to the 16 bpp version.

This is cherrypicked from libav commit
09eb88a1.
Signed-off-by: Martin Storsjö <martin@martin.st>

All elements are used pairwise, except for the first one.
Previously, the 16th element was unused. Move the unused element
to the second slot, to make the later element pairs not split
across registers.

This simplifies loading only parts of the coefficients,
reducing the difference to the 16 bpp version.

This is cherrypicked from libav commit
de06bdfe.
Signed-off-by: Martin Storsjö <martin@martin.st>

The idct32x32 function actually pushed d8-d15 onto the stack even
though it didn't clobber them; there are plenty of registers that
can be used to allow keeping all the idct coefficients in registers
without having to reload different subsets of them at different
stages in the transform.

After this, we still can skip pushing d12-d15.

Before:
vp9_inv_dct_dct_32x32_sub32_add_neon: 8128.3
After:
vp9_inv_dct_dct_32x32_sub32_add_neon: 8053.3

This is cherrypicked from libav commit
65aa002d.
Signed-off-by: Martin Storsjö <martin@martin.st>

The idct32x32 function actually pushed q4-q7 onto the stack even
though it didn't clobber them; there are plenty of registers that
can be used to allow keeping all the idct coefficients in registers
without having to reload different subsets of them at different
stages in the transform.

Since the idct16 core transform avoids clobbering q4-q7 (but clobbers
q2-q3 instead, to avoid needing to back up and restore q4-q7 at all
in the idct16 function), and the lanewise vmul needs a register in
the q0-q3 range, we move the stored coefficients from q2-q3 into q4-q5
while doing idct16.

While keeping these coefficients in registers, we still can skip pushing
q7.

Before:                              Cortex A7       A8       A9      A53
vp9_inv_dct_dct_32x32_sub32_add_neon:  18553.8  17182.7  14303.3  12089.7
After:
vp9_inv_dct_dct_32x32_sub32_add_neon:  18470.3  16717.7  14173.6  11860.8

This is cherrypicked from libav commit
402546a1.
Signed-off-by: Martin Storsjö <martin@martin.st>

For this case, with 8 inputs but only changing 4 of them, we can fit
all 16 input pixels into a q register, and still have enough temporary
registers for doing the loop filter.

The wd=8 filters would require too many temporary registers for
processing all 16 pixels at once though.

Before:                          Cortex A7      A8     A9     A53
vp9_loop_filter_mix2_v_44_16_neon:   289.7   256.2  237.5   181.2
After:
vp9_loop_filter_mix2_v_44_16_neon:   221.2   150.5  177.7   138.0

This is cherrypicked from libav commit
575e31e9.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is one cycle faster in total, and three instructions fewer.

Before:
vp9_loop_filter_mix2_v_44_16_neon: 123.2
After:
vp9_loop_filter_mix2_v_44_16_neon: 122.2

This is cherrypicked from libav commit
3bf9c483.
Signed-off-by: Martin Storsjö <martin@martin.st>

The theoretical maximum value of E is 193, so we can just
saturate the addition to 255.

Before:                     Cortex A7      A8      A9     A53  A53/AArch64
vp9_loop_filter_v_4_8_neon:     143.0   127.7   114.8    88.0         87.7
vp9_loop_filter_v_8_8_neon:     241.0   197.2   173.7   140.0        136.7
vp9_loop_filter_v_16_8_neon:    497.0   419.5   379.7   293.0        275.7
vp9_loop_filter_v_16_16_neon:   965.2   818.7   731.4   579.0        452.0
After:
vp9_loop_filter_v_4_8_neon:     136.0   125.7   112.6    84.0         83.0
vp9_loop_filter_v_8_8_neon:     234.0   195.5   171.5   136.0        133.7
vp9_loop_filter_v_16_8_neon:    490.0   417.5   377.7   289.0        271.0
vp9_loop_filter_v_16_16_neon:   951.2   814.7   732.3   571.0        446.7

This is cherrypicked from libav commit
c582cb85.
Signed-off-by: Martin Storsjö <martin@martin.st>

This fixes building with clang for linux with PIC enabled.

This is cherrypicked from libav commit
8847eeaa.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
07b5136c.
Signed-off-by: Martin Storsjö <martin@martin.st>

This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.

This is cherrypicked from libav commit
b0806088.
Signed-off-by: Martin Storsjö <martin@martin.st>

This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.

This is cherrypicked from libav commit
e18c3900.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
435cd7bc.
Signed-off-by: Martin Storsjö <martin@martin.st>

Previously we first calculated hev, and then negated it.

Since we were able to schedule the negation in the middle
of another calculation, we don't see any gain in all cases.

Before:                     Cortex A7      A8      A9     A53  A53/AArch64
vp9_loop_filter_v_4_8_neon:     147.0   129.0   115.8    89.0         88.7
vp9_loop_filter_v_8_8_neon:     242.0   198.5   174.7   140.0        136.7
vp9_loop_filter_v_16_8_neon:    500.0   419.5   382.7   293.0        275.7
vp9_loop_filter_v_16_16_neon:   971.2   825.5   731.5   579.0        453.0
After:
vp9_loop_filter_v_4_8_neon:     143.0   127.7   114.8    88.0         87.7
vp9_loop_filter_v_8_8_neon:     241.0   197.2   173.7   140.0        136.7
vp9_loop_filter_v_16_8_neon:    497.0   419.5   379.7   293.0        275.7
vp9_loop_filter_v_16_16_neon:   965.2   818.7   731.4   579.0        452.0

This is cherrypicked from libav commit
e1f9de86.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

Before:                           Cortex A53
vp9_inv_dct_dct_16x16_sub1_add_neon:   235.3
vp9_inv_dct_dct_32x32_sub1_add_neon:   555.1
After:
vp9_inv_dct_dct_16x16_sub1_add_neon:   180.2
vp9_inv_dct_dct_32x32_sub1_add_neon:   475.3

This is cherrypicked from libav commit
3fcf788f.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

Before:                            Cortex A7      A8      A9     A53
vp9_inv_dct_dct_16x16_sub1_add_neon:   273.0   189.5   211.7   235.8
vp9_inv_dct_dct_32x32_sub1_add_neon:   752.0   459.2   862.2   553.9
After:
vp9_inv_dct_dct_16x16_sub1_add_neon:   226.5   145.0   225.1   171.8
vp9_inv_dct_dct_32x32_sub1_add_neon:   721.2   415.7   727.6   475.0

This is cherrypicked from libav commit
a76bf8cf.
Signed-off-by: Martin Storsjö <martin@martin.st>

No measured speedup on a Cortex A53, but other cores might benefit.

This is cherrypicked from libav commit
388e0d25.
Signed-off-by: Martin Storsjö <martin@martin.st>

Before:                    Cortex A7      A8     A9     A53
vp9_put_8tap_smooth_4h_neon:   378.1   273.2  340.7   229.5
After:
vp9_put_8tap_smooth_4h_neon:   352.1   222.2  290.5   229.5

This is cherrypicked from libav commit
fea92a4b.
Signed-off-by: Martin Storsjö <martin@martin.st>

Fold the field lengths into the macro.

This makes the macro invocations much more readable, when the
lines are shorter.

This also makes it easier to use only half the registers within
the macro.

This is cherrypicked from libav commit
5e0c2158.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
0c0b87f1.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
8476eb0d.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
3dd78272.
Signed-off-by: Martin Storsjö <martin@martin.st>

The ld1r is a leftover from the arm version, where this trick is
beneficial on some cores.

Use a single-lane load where we don't need the semantics of ld1r.

This is cherrypicked from libav commit
ed8d2933.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
4da4b2b8.
Signed-off-by: Martin Storsjö <martin@martin.st>

This is cherrypicked from libav commit
3933b86b.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This avoids loading and calculating coefficients that we know will
be zero, and avoids filling the temp buffer with zeros in places
where we know the second pass won't read.

This gives a pretty substantial speedup for the smaller subpartitions.

The code size increases from 14740 bytes to 24292 bytes.

The idct16/32_end macros are moved above the individual functions; the
instructions themselves are unchanged, but since new functions are added
at the same place where the code is moved from, the diff looks rather
messy.

Before:
vp9_inv_dct_dct_16x16_sub1_add_neon:     236.7
vp9_inv_dct_dct_16x16_sub2_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub4_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub8_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub12_add_neon:   1387.4
vp9_inv_dct_dct_16x16_sub16_add_neon:   1387.6
vp9_inv_dct_dct_32x32_sub1_add_neon:     554.1
vp9_inv_dct_dct_32x32_sub2_add_neon:    5198.5
vp9_inv_dct_dct_32x32_sub4_add_neon:    5198.6
vp9_inv_dct_dct_32x32_sub8_add_neon:    5196.3
vp9_inv_dct_dct_32x32_sub12_add_neon:   6183.4
vp9_inv_dct_dct_32x32_sub16_add_neon:   6174.3
vp9_inv_dct_dct_32x32_sub20_add_neon:   7151.4
vp9_inv_dct_dct_32x32_sub24_add_neon:   7145.3
vp9_inv_dct_dct_32x32_sub28_add_neon:   8119.3
vp9_inv_dct_dct_32x32_sub32_add_neon:   8118.7

After:
vp9_inv_dct_dct_16x16_sub1_add_neon:     236.7
vp9_inv_dct_dct_16x16_sub2_add_neon:     640.8
vp9_inv_dct_dct_16x16_sub4_add_neon:     639.0
vp9_inv_dct_dct_16x16_sub8_add_neon:     842.0
vp9_inv_dct_dct_16x16_sub12_add_neon:   1388.3
vp9_inv_dct_dct_16x16_sub16_add_neon:   1389.3
vp9_inv_dct_dct_32x32_sub1_add_neon:     554.1
vp9_inv_dct_dct_32x32_sub2_add_neon:    3685.5
vp9_inv_dct_dct_32x32_sub4_add_neon:    3685.1
vp9_inv_dct_dct_32x32_sub8_add_neon:    3684.4
vp9_inv_dct_dct_32x32_sub12_add_neon:   5312.2
vp9_inv_dct_dct_32x32_sub16_add_neon:   5315.4
vp9_inv_dct_dct_32x32_sub20_add_neon:   7154.9
vp9_inv_dct_dct_32x32_sub24_add_neon:   7154.5
vp9_inv_dct_dct_32x32_sub28_add_neon:   8126.6
vp9_inv_dct_dct_32x32_sub32_add_neon:   8127.2

This is cherrypicked from libav commit
a63da451.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This avoids loading and calculating coefficients that we know will
be zero, and avoids filling the temp buffer with zeros in places
where we know the second pass won't read.

This gives a pretty substantial speedup for the smaller subpartitions.

The code size increases from 12388 bytes to 19784 bytes.

The idct16/32_end macros are moved above the individual functions; the
instructions themselves are unchanged, but since new functions are added
at the same place where the code is moved from, the diff looks rather
messy.

Before:                              Cortex A7       A8       A9      A53
vp9_inv_dct_dct_16x16_sub1_add_neon:     273.0    189.5    212.0    235.8
vp9_inv_dct_dct_16x16_sub2_add_neon:    2102.1   1521.7   1736.2   1265.8
vp9_inv_dct_dct_16x16_sub4_add_neon:    2104.5   1533.0   1736.6   1265.5
vp9_inv_dct_dct_16x16_sub8_add_neon:    2484.8   1828.7   2014.4   1506.5
vp9_inv_dct_dct_16x16_sub12_add_neon:   2851.2   2117.8   2294.8   1753.2
vp9_inv_dct_dct_16x16_sub16_add_neon:   3239.4   2408.3   2543.5   1994.9
vp9_inv_dct_dct_32x32_sub1_add_neon:     758.3    456.7    864.5    553.9
vp9_inv_dct_dct_32x32_sub2_add_neon:   10776.7   7949.8   8567.7   6819.7
vp9_inv_dct_dct_32x32_sub4_add_neon:   10865.6   8131.5   8589.6   6816.3
vp9_inv_dct_dct_32x32_sub8_add_neon:   12053.9   9271.3   9387.7   7564.0
vp9_inv_dct_dct_32x32_sub12_add_neon:  13328.3  10463.2  10217.0   8321.3
vp9_inv_dct_dct_32x32_sub16_add_neon:  14176.4  11509.5  11018.7   9062.3
vp9_inv_dct_dct_32x32_sub20_add_neon:  15301.5  12999.9  11855.1   9828.2
vp9_inv_dct_dct_32x32_sub24_add_neon:  16482.7  14931.5  12650.1  10575.0
vp9_inv_dct_dct_32x32_sub28_add_neon:  17589.5  15811.9  13482.8  11333.4
vp9_inv_dct_dct_32x32_sub32_add_neon:  18696.2  17049.2  14355.6  12089.7

After:
vp9_inv_dct_dct_16x16_sub1_add_neon:     273.0    189.5    211.7    235.8
vp9_inv_dct_dct_16x16_sub2_add_neon:    1203.5    998.2   1035.3    763.0
vp9_inv_dct_dct_16x16_sub4_add_neon:    1203.5    998.1   1035.5    760.8
vp9_inv_dct_dct_16x16_sub8_add_neon:    1926.1   1610.6   1722.1   1271.7
vp9_inv_dct_dct_16x16_sub12_add_neon:   2873.2   2129.7   2285.1   1757.3
vp9_inv_dct_dct_16x16_sub16_add_neon:   3221.4   2520.3   2557.6   2002.1
vp9_inv_dct_dct_32x32_sub1_add_neon:     753.0    457.5    866.6    554.6
vp9_inv_dct_dct_32x32_sub2_add_neon:    7554.6   5652.4   6048.4   4920.2
vp9_inv_dct_dct_32x32_sub4_add_neon:    7549.9   5685.0   6046.9   4925.7
vp9_inv_dct_dct_32x32_sub8_add_neon:    8336.9   6704.5   6604.0   5478.0
vp9_inv_dct_dct_32x32_sub12_add_neon:  10914.0   9777.2   9240.4   7416.9
vp9_inv_dct_dct_32x32_sub16_add_neon:  11859.2  11223.3   9966.3   8095.1
vp9_inv_dct_dct_32x32_sub20_add_neon:  15237.1  13029.4  11838.3   9829.4
vp9_inv_dct_dct_32x32_sub24_add_neon:  16293.2  14379.8  12644.9  10572.0
vp9_inv_dct_dct_32x32_sub28_add_neon:  17424.3  15734.7  13473.0  11326.9
vp9_inv_dct_dct_32x32_sub32_add_neon:  18531.3  17457.0  14298.6  12080.0

This is cherrypicked from libav commit
5eb5aec4.
Signed-off-by: Martin Storsjö <martin@martin.st>

This allows reusing the macro for a separate implementation of the
pass2 function.

This is cherrypicked from libav commit
79d332eb.
Signed-off-by: Martin Storsjö <martin@martin.st>

This allows reusing the macro for a separate implementation of the
pass2 function.

This is cherrypicked from libav commit
47b3c2c1.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This reduces the code size of libavcodec/aarch64/vp9itxfm_neon.o from
19496 to 14740 bytes.

This gives a small slowdown of a couple of tens of cycles, but makes
it more feasible to add more optimized versions of these transforms.

Before:
vp9_inv_dct_dct_16x16_sub4_add_neon:    1036.7
vp9_inv_dct_dct_16x16_sub16_add_neon:   1372.2
vp9_inv_dct_dct_32x32_sub4_add_neon:    5180.0
vp9_inv_dct_dct_32x32_sub32_add_neon:   8095.7

After:
vp9_inv_dct_dct_16x16_sub4_add_neon:    1051.0
vp9_inv_dct_dct_16x16_sub16_add_neon:   1390.1
vp9_inv_dct_dct_32x32_sub4_add_neon:    5199.9
vp9_inv_dct_dct_32x32_sub32_add_neon:   8125.8

This is cherrypicked from libav commit
11547601.
Signed-off-by: Martin Storsjö <martin@martin.st>

This work is sponsored by, and copyright, Google.

This reduces the code size of libavcodec/arm/vp9itxfm_neon.o from
15324 to 12388 bytes.

This gives a small slowdown of a couple tens of cycles, up to around
150 cycles for the full case of the largest transform, but makes
it more feasible to add more optimized versions of these transforms.

Before:                              Cortex A7       A8       A9      A53
vp9_inv_dct_dct_16x16_sub4_add_neon:    2063.4   1516.0   1719.5   1245.1
vp9_inv_dct_dct_16x16_sub16_add_neon:   3279.3   2454.5   2525.2   1982.3
vp9_inv_dct_dct_32x32_sub4_add_neon:   10750.0   7955.4   8525.6   6754.2
vp9_inv_dct_dct_32x32_sub32_add_neon:  18574.0  17108.4  14216.7  12010.2

After:
vp9_inv_dct_dct_16x16_sub4_add_neon:    2060.8   1608.5   1735.7   1262.0
vp9_inv_dct_dct_16x16_sub16_add_neon:   3211.2   2443.5   2546.1   1999.5
vp9_inv_dct_dct_32x32_sub4_add_neon:   10682.0   8043.8   8581.3   6810.1
vp9_inv_dct_dct_32x32_sub32_add_neon:  18522.4  17277.4  14286.7  12087.9

This is cherrypicked from libav commit
0331c3f5.
Signed-off-by: Martin Storsjö <martin@martin.st>

This avoids concatenation, which can't be used if the whole macro
is wrapped within another macro.

This is also arguably more readable.

This is cherrypicked from libav commit
58d87e0f.
Signed-off-by: Martin Storsjö <martin@martin.st>

This makes it more readable.

This is cherrypicked from libav commit
3bc5b28d.
Signed-off-by: Martin Storsjö <martin@martin.st>

The 'sqrt' and 'cbrt' scalers were added in commit
80262d8c, but their symbolic option values
only made available to the showwaves filter, not showwavespic, despite
the scalers working properly by their numerical option values.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>

because the ffprobe can use AVCodecContext parameters
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

Fixes: timeout in 758/clusterfuzz-testcase-4720832028868608

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>