Signed-off-by: James Almer <jamrial@gmail.com>

There's no need to allocate a new packet for it.
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Adds the level prefix to all log messages, except those with level <=
AV_LOG_QUIET as they seem to be used for flushing the log buffer.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>

Signed-off-by: James Almer <jamrial@gmail.com>

Support dump bit stream filter option in ffmpeg -h full and
ffmpeg -h bsf=FooBar.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

enable dump bit stream filter and update opt fate test ref.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

add AV_OPT_FLAG_BSF_PARAM for bit stream filter options.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Simplifies code.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

* commit '49804dc2':
  configure: Use test_ prefix for helper functions that do not set variables
Merged-by: James Almer <jamrial@gmail.com>

* commit '8c893aa3':
  configure: Drop unnecessary variables, shifts, and quotes in helper functions
Merged-by: James Almer <jamrial@gmail.com>

* commit '12131489':
  configure: Fix logic of AMF external library check

This commit is a noop. AMF is meant to be autodetected.
Merged-by: James Almer <jamrial@gmail.com>

* commit '0711d142':
  examples: Use new API for transcoding example
Merged-by: James Almer <jamrial@gmail.com>

* commit 'aeaa108b':
  hls: Add a discontinuity marker on recover

This commit is a noop, see
572a8292
6b95da9aMerged-by: James Almer <jamrial@gmail.com>

Signed-off-by: Steven Liu <lingjiujianke@gmail.com>

These two are not used for bitstream filters.
Reviewed-by: Martin Vignali <martin.vignali@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Reviewed-by: Steven Liu <lq@chinaffmpeg.org>

ret is 0 by default.
Reviewed-by: Martin Vignali <martin.vignali@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>

There's no need to allocate a new packet for it.
Signed-off-by: James Almer <jamrial@gmail.com>

In cases where the mediacodec decoder consumed a partial packet,
receive_frame() would start returning EAGAIN if the rest of the
packet couldn't be flushed and no frames were immediately available.

This fixes receive_frame() to perform its normal blocking wait for
new frames before returning EAGAIN. Fixes an issue I could reproduce
fairly often on a FireOS 6 device, and reported to be happening
intermittently by two mpv users.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Matthieu Bouron <matthieu.bouron@gmail.com>

with and without snappy compression
with chunk 1 or chunk 16
for hap, hapa, and hapq

convert HapQA data to HAPQ or HAPAlphaOnly
by copying the corresponding texture

On Windows machines, the UL suffix still means 32 bits.
The only parts that need 64 bits are (1ULL << (m + 32)) and
(t*qf + qf). Hence, use the proper ULL suffix for the former
and just increase the type of the qf constant for the latter.
No overflows can happen as long as these are done in 64 bits and
the quantization table doesn't change.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>

  Thanks for the discussion. Here's the next version, now with /25 and removed
ff_log2().

  The blocksize of the PCM decoder is hard-coded. This creates
unnecessary delay when reading low-rate (<100Hz) streams. This creates
issues when multiplexing multiple streams, since other inputs are only
opened/read after a low-rate input block was completely read.

 This patch decreases the blocksize for low-rate inputs, so
approximately a block is read every 40ms. This decreases the startup
delay when multiplexing inputs with different rates.
Signed-off-by: Philipp M. Scholl <pscholl@bawue.de>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Any parameter set shall have start code of at least 4 byte size.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes a regression since 2a88ebd0 which caused
an infinite loop in the subtitle decoding.

Fixes ticket #6796.
Signed-off-by: Marton Balint <cus@passwd.hu>

This is the fix for bug https://trac.ffmpeg.org/ticket/7073

Tested-by: Brainiarc7
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>

Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Matthieu Bouron <matthieu.bouron@gmail.com>

Some Android devices are very finicky about how quicky output buffers
are returned back to the decoder, especially when they are associated
with a Surface.

This commit adds a new counter that keeps track of exactly how many hw
output buffers are being retained by the user, along with DEBUG level
logging that makes it easy to track the lifecycle of these buffers.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Matthieu Bouron <matthieu.bouron@gmail.com>

Fixes: Timeout
Fixes: 6297/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_NUV_fuzzer-4882404863901696

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: Timeout
Fixes: 6297/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_NUV_fuzzer-4882404863901696

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: NULL pointer dereference
Fixes: poc-201803.wav
Found-by: GwanYeong Kim <gy741.kim@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: runtime error: signed integer overflow: -9166684017437101870 + -2495066639299164439 cannot be represented in type

Fixes: Chromium bug 791349
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>

There's no need to allocate a new packet for it.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>

There's no need to allocate a new packet for it.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>

There's no need to allocate a new packet for it.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>

There's no need to allocate a new packet for it.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>