Now that ff_interleave_add_packet() always returns blank packets, the
input packet to ff_interleave_packet_per_dts() will always be blank on
return as well (if supplied) and the same goes for interleave_packet()
in mux.c. Document these facts and remove the redundant resetting that
happened in av_interleaved_write_frame().

The last reference to the (long removed) destruct field that AVPackets
once had has been removed as well when updating the documentation of
ff_interleave_packet_per_dts().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

When an error happened in ff_interleave_add_packet() when adding
a packet to the packet queue, said packet would not be unreferenced
in ff_interleave_add_packet(), but would be zeroed in
av_interleaved_write_frame(), which results in a memleak.

This has been fixed: ff_interleave_add_packet() now always unreferences
the input packet on error; as a result, it always returns blank packets
which has been documented. Relying on this a call to av_packet_unref()
in ff_audio_rechunk_interleave() can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

If writing uncoded frames in noninterleaved mode fails at the preparatory
steps (i.e. before it reaches write_packet()), the packet would not be
unreferenced and the frame would leak. This is fixed by unreferencing
the packet in write_uncoded_frame_internal() instead.

This also makes it possible to remove the unreferencing in
write_packet() itself: In noninterleaved mode frames are now freed in
write_uncoded_frame_internal(), while they are freed in interleaved
mode when their containing packet gets unreferenced (like normal
packets).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Currently uncoded frames (i.e. packets whose data actually points to an
AVFrame) are not refcounted. As a consequence, calling av_packet_unref()
on them will not free them, but may simply make sure that they leak by
losing the pointer to the frame.

This commit changes this by actually making uncoded frames refcounted.
In order not to rely on sizeof(AVFrame) (which is not part of the public
API and so must not be used here in libavformat) the packet's data is
changed to a (padded) buffer containing just a pointer to an AVFrame.
Said buffer is owned by an AVBuffer with a custom free function that
frees the frame as well as the buffer. Thereby the pointer/the AVBuffer
owns the AVFrame.

Said ownership can actually be transferred by copying and resetting
the pointer, as might happen when actually writing the uncoded frames
in AVOutputFormat.write_uncoded_frame() (although currently no muxer
makes use of this possibility).

This makes packets containing uncoded frames compatible with
av_packet_unref(). This already has three advantages in interleaved mode:
1. If an error happens at the preparatory steps (before the packet is
put into the interleavement queue), the frame is properly freed.
2. If the trailer is never written, the frames still in the
interleavement queue will now be properly freed by
ff_packet_list_free().
3. The custom code for moving the packet to the packet list in
ff_interleave_add_packet() can be removed.

It will also simplify fixing further memleaks in future commits.
Suggested-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Based on the one in ffmpeg.c and it is not using an extra flush_idx variable.
Signed-off-by: Marton Balint <cus@passwd.hu>

Signed-off-by: Limin Wang <lance.lmwang@gmail.com>

The data of an attachment file is put into an AVCodecParameter's
extradata. The corresponding size field has type int, yet there was no
check for the size to fit into an int. As a consequence, it was possible
to create extradata with negative size (by using a big enough max_alloc).

Other errors were also possible: If SIZE_MAX < INT64_MAX (e.g. on 32bit
systems) then the file size might be truncated before the allocation;
and avio_read() takes an int, too, so one would not have read as much
as one desired.

Furthermore, the extradata is now padded as is required.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Signed-off-by: Marton Balint <cus@passwd.hu>

Also change the default to that.
Signed-off-by: Marton Balint <cus@passwd.hu>

Also change the default to that.
Signed-off-by: Marton Balint <cus@passwd.hu>

Based on code from the BMP parser.

Addresses ticket #8574
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>

Fixes: left shift of negative value -14336
Fixes: 20298/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AC3_FIXED_fuzzer-5675484201615360

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: Timeout
Fixes: out of array access
Fixes: 20274/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FLAC_fuzzer-5649631988154368
Fixes: 19275/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FLAC_fuzzer-5757535722405888

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: signed integer overflow: 2145417478 + 76702564 cannot be represented in type 'int'
Fixes: 20313/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RA_144_fuzzer-5734487724130304

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Previously, there was no way to flush an encoder such that after
draining, the encoder could be used again. We generally suggested
that clients teardown and replace the encoder instance in these
situations. However, for at least some hardware encoders, the cost of
this tear down/replace cycle is very high, which can get in the way of
some use-cases - for example: segmented encoding with nvenc.

To help address that use case, we added support for calling
avcodec_flush_buffers() to nvenc and things worked in practice,
although it was not clearly documented as to whether this should work
or not. There was only one previous example of an encoder implementing
the flush callback (audiotoolboxenc) and it's unclear if that was
intentional or not. However, it was clear that calling
avocdec_flush_buffers() on any other encoder would leave the encoder in
an undefined state, and that's not great.

As part of cleaning this up, this change introduces a formal capability
flag for encoders that support flushing and ensures a flush call is a
no-op for any other encoder. This allows client code to check if it is
meaningful to call flush on an encoder before actually doing it.

I have not attempted to separate the steps taken inside
avcodec_flush_buffers() because it's not doing anything that's wrong
for an encoder. But I did add a sanity check to reject attempts to
flush a frame threaded encoder because I couldn't wrap my head around
whether that code path was actually safe or not. As this combination
doesn't exist today, we'll deal with it if it ever comes up.

Signed-off-by: James Almer <jamrial@gmail.com>

This copies the behaviour of the libopenjpeg decoder.
Fixes ticket #5919.

Fixes ticket #8612.

This generates a potential memory leak, and mixes side data from the last
packet with other properties from the first.

Keep all the properties from the first packet only in the output packet
instead.
Signed-off-by: James Almer <jamrial@gmail.com>

Fixes: index 224 out of bounds for type 'uint8_t [224]'
Fixes: 21534/clusterfuzz-testcase-minimized-ffmpeg_BSF_TRACE_HEADERS_fuzzer-6291612167831552

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Fixes: out of array access
Fixes: 21515/clusterfuzz-testcase-minimized-ffmpeg_BSF_TRACE_HEADERS_fuzzer-5766121576988672

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: Michael Niedermayer <michael@niedermayer.cc>

Works around a bug in the newer Xcode 11's clang with -fstack-check
emitting bad code with misaligned call instructions.

This fixes Trac #8073

Fixes ticket #8607.
Signed-off-by: Matthieu Bouron <matthieu.bouron@gmail.com>

There should have language in the metadata of streams which show to user
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

add option for resend init file after m3u8 refresh everytime.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>

When flushing the capture buffers, the driver may send a V4L2_EVENT_EOS
to notify that draining is completed. Currently, v4l2_m2m does not
subscribe to this event, which can cause some devices (i.e. imx8qm) to
hang at the end of encoding/decoding. Support for handling the event is
added in this commit.

Some devices may not signal V4L2_EVENT_EOS. This is logged as a warning
message during initialization and not treated as a fatal error.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>

The only difference of the currently used write_packet()-function to
ff_raw_write_packet() is that the former also counts the number of
frames. Yet doing so in the muxer itself is unnecessary as this is
already done generically in write_packet() in libavformat/mux.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

as has happened with flac_picture.o and the Matroska demuxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

These muxers don't depend on the WebM Chunk or the WebM DASH Manifest
muxers.

Furthermore, remove some #if checks in webm_chunk.c and webmdashenc.c.
They are always true now that webm_chunk.c and webmdashenc.c are only
compiled when their corresponding muxers are enabled.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>

It does not use anything from libavformat/matroska.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>