replace FFmpeg with Libav in doc/

unless it stands for ffmpeg the program or is historic

doc/bitstream_filters.texi

 @chapter Bitstream Filters
 @c man begin BITSTREAM FILTERS
 
-When you configure your FFmpeg build, all the supported bitstream
+When you configure your Libav build, all the supported bitstream
 filters are enabled by default. You can list all available ones using
 the configure option @code{--list-bsfs}.
 

doc/build_system.txt

-FFmpeg currently uses a custom build system, this text attempts to document
+Libav currently uses a custom build system, this text attempts to document
 some of its obscure features and options.
 
 Options to make:

doc/demuxers.texi

 @chapter Demuxers
 @c man begin DEMUXERS
 
-Demuxers are configured elements in FFmpeg which allow to read the
+Demuxers are configured elements in Libav which allow to read the
 multimedia streams from a particular type of file.
 
-When you configure your FFmpeg build, all the supported demuxers
+When you configure your Libav build, all the supported demuxers
 are enabled by default. You can list all available ones using the
 configure option "--list-demuxers".
 

doc/developer.texi

@@ -32,12 +32,12 @@ generated by ./configure to understand what is needed.
 
 You can use libavcodec or libavformat in your commercial program, but
 @emph{any patch you make must be published}. The best way to proceed is
-to send your patches to the FFmpeg mailing list.
+to send your patches to the Libav mailing list.
 
 @anchor{Coding Rules}
 @section Coding Rules
 
-FFmpeg is programmed in the ISO C90 language with a few additional
+Libav is programmed in the ISO C90 language with a few additional
 features from ISO C99, namely:
 @itemize @bullet
 @item
@@ -54,7 +54,7 @@ These features are supported by all compilers we care about, so we will not
 accept patches to remove their use unless they absolutely do not impair
 clarity and performance.
 
-All code must compile with GCC 2.95 and GCC 3.3. Currently, FFmpeg also
+All code must compile with GCC 2.95 and GCC 3.3. Currently, Libav also
 compiles with several other compilers, such as the Compaq ccc compiler
 or Sun Studio 9, and we would like to keep it that way unless it would
 be exceedingly involved. To ensure compatibility, please do not use any
@@ -76,7 +76,7 @@ The TAB character is forbidden outside of Makefiles as is any
 form of trailing whitespace. Commits containing either will be
 rejected by the Subversion repository.
 
-The main priority in FFmpeg is simplicity and small code size in order to
+The main priority in Libav is simplicity and small code size in order to
 minimize the bug count.
 
 Comments: Use the JavaDoc/Doxygen
@@ -129,7 +129,7 @@ should also be avoided if they don't make the code easier to understand.
    an "or any later version" clause is also acceptable, but LGPL is
    preferred.
 @item
-   You must not commit code which breaks FFmpeg! (Meaning unfinished but
+   You must not commit code which breaks Libav! (Meaning unfinished but
    enabled code which breaks compilation or compiles but does not work or
    breaks the regression tests)
    You can commit unfinished stuff (for testing etc), but it must be disabled
@@ -168,7 +168,7 @@ should also be avoided if they don't make the code easier to understand.
    with functional changes, such commits will be rejected and removed. Every
    developer has his own indentation style, you should not change it. Of course
    if you (re)write something, you can use your own style, even though we would
-   prefer if the indentation throughout FFmpeg was consistent (Many projects
+   prefer if the indentation throughout Libav was consistent (Many projects
    force a given indentation style - we do not.). If you really need to make
    indentation changes (try to avoid this), separate them strictly from real
    changes.
@@ -253,7 +253,7 @@ keeping it as a logical unit that contains an individual change, even
 if it spans multiple files. This makes reviewing your patches much easier
 for us and greatly increases your chances of getting your patch applied.
 
-Use the patcheck tool of FFmpeg to check your patch.
+Use the patcheck tool of Libav to check your patch.
 The tool is located in the tools directory.
 
 Run the regression tests before submitting a patch so that you can
@@ -275,7 +275,7 @@ Your patch will be reviewed on the mailing list. You will likely be asked
 to make some changes and are expected to send in an improved version that
 incorporates the requests from the review. This process may go through
 several iterations. Once your patch is deemed good enough, some developer
-will pick it up and commit it to the official FFmpeg tree.
+will pick it up and commit it to the official Libav tree.
 
 Give us a few days to react. But if some time passes without reaction,
 send a reminder by email. Your patch should eventually be dealt with.
@@ -325,7 +325,7 @@ send a reminder by email. Your patch should eventually be dealt with.
 @item
     Is the patch a unified diff?
 @item
-    Is the patch against latest FFmpeg git master branch?
+    Is the patch against latest Libav git master branch?
 @item
     Are you subscribed to ffmpeg-dev?
     (the list is subscribers only due to spam)
@@ -374,7 +374,7 @@ send a reminder by email. Your patch should eventually be dealt with.
     patch easily?
 @item
     If you added a new file, did you insert a license header? It should be
-    taken from FFmpeg, not randomly copied and pasted from somewhere else.
+    taken from Libav, not randomly copied and pasted from somewhere else.
 @item
     You should maintain alphabetical order in alphabetically ordered lists as
     long as doing so does not break API/ABI compatibility.

doc/encoders.texi

 @chapter Encoders
 @c man begin ENCODERS
 
-Encoders are configured elements in FFmpeg which allow the encoding of
+Encoders are configured elements in Libav which allow the encoding of
 multimedia streams.
 
-When you configure your FFmpeg build, all the supported native encoders
+When you configure your Libav build, all the supported native encoders
 are enabled by default. Encoders requiring an external library must be enabled
 manually via the corresponding @code{--enable-lib} option. You can list all
 available encoders using the configure option @code{--list-encoders}.

doc/eval.texi

 @chapter Expression Evaluation
 @c man begin EXPRESSION EVALUATION
 
-When evaluating an arithemetic expression, FFmpeg uses an internal
+When evaluating an arithemetic expression, Libav uses an internal
 formula evaluator, implemented through the @file{libavutil/eval.h}
 interface.
 

doc/faq.texi

 \input texinfo @c -*- texinfo -*-
 
-@settitle FFmpeg FAQ
+@settitle Libav FAQ
 @titlepage
-@center @titlefont{FFmpeg FAQ}
+@center @titlefont{Libav FAQ}
 @end titlepage
 
 @top
@@ -11,33 +11,33 @@
 
 @chapter General Questions
 
-@section When will the next FFmpeg version be released? / Why are FFmpeg releases so few and far between?
+@section When will the next Libav version be released? / Why are Libav releases so few and far between?
 
-Like most open source projects FFmpeg suffers from a certain lack of
+Like most open source projects Libav suffers from a certain lack of
 manpower. For this reason the developers have to prioritize the work
 they do and putting out releases is not at the top of the list, fixing
 bugs and reviewing patches takes precedence. Please don't complain or
 request more timely and/or frequent releases unless you are willing to
 help out creating them.
 
-@section I have a problem with an old version of FFmpeg; where should I report it?
-Nowhere. We do not support old FFmpeg versions in any way, we simply lack
+@section I have a problem with an old version of Libav; where should I report it?
+Nowhere. We do not support old Libav versions in any way, we simply lack
 the time, motivation and manpower to do so. If you have a problem with an
-old version of FFmpeg, upgrade to the latest Subversion snapshot. If you
+old version of Libav, upgrade to the latest Subversion snapshot. If you
 still experience the problem, then you can report it according to the
 guidelines in @url{http://libav.org/bugreports.html}.
 
-@section Why doesn't FFmpeg support feature [xyz]?
+@section Why doesn't Libav support feature [xyz]?
 
-Because no one has taken on that task yet. FFmpeg development is
+Because no one has taken on that task yet. Libav development is
 driven by the tasks that are important to the individual developers.
 If there is a feature that is important to you, the best way to get
 it implemented is to undertake the task yourself or sponsor a developer.
 
-@section FFmpeg does not support codec XXX. Can you include a Windows DLL loader to support it?
+@section Libav does not support codec XXX. Can you include a Windows DLL loader to support it?
 
 No. Windows DLLs are not portable, bloated and often slow.
-Moreover FFmpeg strives to support all codecs natively.
+Moreover Libav strives to support all codecs natively.
 A DLL loader is not conducive to that goal.
 
 @section My bug report/mail to libav-devel/user has not received any replies.
@@ -55,10 +55,10 @@ libav* from another application.
 @item You speak about a video having problems on playback but
 not what you use to play it.
 @item We have no faint clue what you are talking about besides
-that it is related to FFmpeg.
+that it is related to Libav.
 @end itemize
 
-@section Is there a forum for FFmpeg? I do not like mailing lists.
+@section Is there a forum for Libav? I do not like mailing lists.
 
 You may view our mailing lists with a more forum-alike look here:
 @url{http://dir.gmane.org/gmane.comp.video.ffmpeg.user},
@@ -272,7 +272,7 @@ material, and try '-top 0/1' if the result looks really messed-up.
 
 @section How can I read DirectShow files?
 
-If you have built FFmpeg with @code{./configure --enable-avisynth}
+If you have built Libav with @code{./configure --enable-avisynth}
 (only possible on MinGW/Cygwin platforms),
 then you may use any file that DirectShow can read as input.
 
@@ -368,11 +368,11 @@ examining all of the vbv_delay values and making complicated computations."
 
 @chapter Development
 
-@section Are there examples illustrating how to use the FFmpeg libraries, particularly libavcodec and libavformat?
+@section Are there examples illustrating how to use the Libav libraries, particularly libavcodec and libavformat?
 
-Yes. Read the Developers Guide of the FFmpeg documentation. Alternatively,
+Yes. Read the Developers Guide of the Libav documentation. Alternatively,
 examine the source code for one of the many open source projects that
-already incorporate FFmpeg at (@url{projects.html}).
+already incorporate Libav at (@url{projects.html}).
 
 @section Can you support my C compiler XXX?
 
@@ -383,14 +383,14 @@ with @code{#ifdef}s related to the compiler.
 @section Is Microsoft Visual C++ supported?
 
 No. Microsoft Visual C++ is not compliant to the C99 standard and does
-not - among other things - support the inline assembly used in FFmpeg.
+not - among other things - support the inline assembly used in Libav.
 If you wish to use MSVC++ for your
 project then you can link the MSVC++ code with libav* as long as
 you compile the latter with a working C compiler. For more information, see
-the @emph{Microsoft Visual C++ compatibility} section in the FFmpeg
+the @emph{Microsoft Visual C++ compatibility} section in the Libav
 documentation.
 
-There have been efforts to make FFmpeg compatible with MSVC++ in the
+There have been efforts to make Libav compatible with MSVC++ in the
 past. However, they have all been rejected as too intrusive, especially
 since MinGW does the job adequately. None of the core developers
 work with MSVC++ and thus this item is low priority. Should you find
@@ -398,13 +398,13 @@ the silver bullet that solves this problem, feel free to shoot it at us.
 
 We strongly recommend you to move over from MSVC++ to MinGW tools.
 
-@section Can I use FFmpeg or libavcodec under Windows?
+@section Can I use Libav or libavcodec under Windows?
 
-Yes, but the Cygwin or MinGW tools @emph{must} be used to compile FFmpeg.
-Read the @emph{Windows} section in the FFmpeg documentation to find more
+Yes, but the Cygwin or MinGW tools @emph{must} be used to compile Libav.
+Read the @emph{Windows} section in the Libav documentation to find more
 information.
 
-To get help and instructions for building FFmpeg under Windows, check out
+To get help and instructions for building Libav under Windows, check out
 the FFmpeg Windows Help Forum at
 @url{http://ffmpeg.arrozcru.org/}.
 
@@ -414,7 +414,7 @@ No. These tools are too bloated and they complicate the build.
 
 @section Why not rewrite ffmpeg in object-oriented C++?
 
-FFmpeg is already organized in a highly modular manner and does not need to
+Libav is already organized in a highly modular manner and does not need to
 be rewritten in a formal object language. Further, many of the developers
 favor straight C; it works for them. For more arguments on this matter,
 read "Programming Religion" at (@url{http://www.tux.org/lkml/#s15}).
@@ -441,16 +441,16 @@ the compilation failure then you are probably not qualified for this.
 
 @section I'm using libavcodec from within my C++ application but the linker complains about missing symbols which seem to be available.
 
-FFmpeg is a pure C project, so to use the libraries within your C++ application
+Libav is a pure C project, so to use the libraries within your C++ application
 you need to explicitly state that you are using a C library. You can do this by
-encompassing your FFmpeg includes using @code{extern "C"}.
+encompassing your Libav includes using @code{extern "C"}.
 
 See @url{http://www.parashift.com/c++-faq-lite/mixing-c-and-cpp.html#faq-32.3}
 
 @section I have a file in memory / a API different from *open/*read/ libc how do I use it with libavformat?
 
 You have to implement a URLProtocol, see @file{libavformat/file.c} in
-FFmpeg and @file{libmpdemux/demux_lavf.c} in MPlayer sources.
+Libav and @file{libmpdemux/demux_lavf.c} in MPlayer sources.
 
 @section I get "No compatible shell script interpreter found." in MSys.
 

doc/ffmpeg.texi

@@ -735,7 +735,7 @@ A preset file contains a sequence of @var{option}=@var{value} pairs,
 one for each line, specifying a sequence of options which would be
 awkward to specify on the command line. Lines starting with the hash
 ('#') character are ignored and are used to provide comments. Check
-the @file{ffpresets} directory in the FFmpeg source tree for examples.
+the @file{ffpresets} directory in the Libav source tree for examples.
 
 Preset files are specified with the @code{vpre}, @code{apre},
 @code{spre}, and @code{fpre} options. The @code{fpre} option takes the
@@ -997,11 +997,11 @@ file to which you want to add them.
 @settitle FFmpeg video converter
 
 @c man begin SEEALSO
-ffplay(1), ffprobe(1), ffserver(1) and the FFmpeg HTML documentation
+ffplay(1), ffprobe(1), ffserver(1) and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS
-The FFmpeg developers
+The Libav developers
 @c man end
 
 @end ignore

doc/ffplay.texi

@@ -20,9 +20,9 @@ ffplay [options] @file{input_file}
 @chapter Description
 @c man begin DESCRIPTION
 
-FFplay is a very simple and portable media player using the FFmpeg
+FFplay is a very simple and portable media player using the Libav
 libraries and the SDL library. It is mostly used as a testbed for the
-various FFmpeg APIs.
+various Libav APIs.
 @c man end
 
 @chapter Options
@@ -169,11 +169,11 @@ Seek to percentage in file corresponding to fraction of width.
 @settitle FFplay media player
 
 @c man begin SEEALSO
-ffmpeg(1), ffprobe(1), ffserver(1) and the FFmpeg HTML documentation
+ffmpeg(1), ffprobe(1), ffserver(1) and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS
-The FFmpeg developers
+The Libav developers
 @c man end
 
 @end ignore

doc/ffprobe.texi

@@ -122,11 +122,11 @@ with name "STREAM".
 @settitle FFprobe media prober
 
 @c man begin SEEALSO
-ffmpeg(1), ffplay(1), ffserver(1) and the FFmpeg HTML documentation
+ffmpeg(1), ffplay(1), ffserver(1) and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS
-The FFmpeg developers
+The Libav developers
 @c man end
 
 @end ignore

doc/ffserver.texi

@@ -266,11 +266,11 @@ rather than as a daemon.
 @c man begin SEEALSO
 
 ffmpeg(1), ffplay(1), ffprobe(1), the @file{ffmpeg/doc/ffserver.conf}
-example and the FFmpeg HTML documentation
+example and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS
-The FFmpeg developers
+The Libav developers
 @c man end
 
 @end ignore

doc/fftools-common-opts.texi

@@ -88,6 +88,6 @@ can be disabled setting the environment variable
 @env{FFMPEG_FORCE_NOCOLOR} or @env{NO_COLOR}, or can be forced setting
 the environment variable @env{FFMPEG_FORCE_COLOR}.
 The use of the environment variable @env{NO_COLOR} is deprecated and
-will be dropped in a following FFmpeg version.
+will be dropped in a following Libav version.
 
 @end table

doc/filters.texi

@@ -92,7 +92,7 @@ Follows a BNF description for the filtergraph syntax:
 @chapter Audio Filters
 @c man begin AUDIO FILTERS
 
-When you configure your FFmpeg build, you can disable any of the
+When you configure your Libav build, you can disable any of the
 existing filters using --disable-filters.
 The configure output will show the audio filters included in your
 build.
@@ -155,7 +155,7 @@ tools.
 @chapter Video Filters
 @c man begin VIDEO FILTERS
 
-When you configure your FFmpeg build, you can disable any of the
+When you configure your Libav build, you can disable any of the
 existing filters using --disable-filters.
 The configure output will show the video filters included in your
 build.
@@ -386,7 +386,7 @@ format=yuv420p:yuv444p:yuv410p
 Apply a frei0r effect to the input video.
 
 To enable compilation of this filter you need to install the frei0r
-header and configure FFmpeg with --enable-frei0r.
+header and configure Libav with --enable-frei0r.
 
 The filter supports the syntax:
 @example
@@ -524,7 +524,7 @@ Pass the video source unchanged to the output.
 Apply video transform using libopencv.
 
 To enable this filter install libopencv library and headers and
-configure FFmpeg with --enable-libopencv.
+configure Libav with --enable-libopencv.
 
 The filter takes the parameters: @var{filter_name}@{:=@}@var{filter_params}.
 
@@ -1164,7 +1164,7 @@ timebase. The expression can contain the constants "PI", "E", "PHI",
 Provide a frei0r source.
 
 To enable compilation of this filter you need to install the frei0r
-header and configure FFmpeg with --enable-frei0r.
+header and configure Libav with --enable-frei0r.
 
 The source supports the syntax:
 @example

doc/general.texi

@@ -11,13 +11,13 @@
 
 @chapter external libraries
 
-FFmpeg can be hooked up with a number of external libraries to add support
+Libav can be hooked up with a number of external libraries to add support
 for more formats. None of them are used by default, their use has to be
 explicitly requested by passing the appropriate flags to @file{./configure}.
 
 @section OpenCORE AMR
 
-FFmpeg can make use of the OpenCORE libraries for AMR-NB
+Libav can make use of the OpenCORE libraries for AMR-NB
 decoding/encoding and AMR-WB decoding.
 
 Go to @url{http://sourceforge.net/projects/opencore-amr/} and follow the instructions for
@@ -27,7 +27,7 @@ installing the libraries. Then pass @code{--enable-libopencore-amrnb} and/or
 Note that OpenCORE is under the Apache License 2.0 (see
 @url{http://www.apache.org/licenses/LICENSE-2.0} for details), which is
 incompatible with the LGPL version 2.1 and GPL version 2. You have to
-upgrade FFmpeg's license to LGPL version 3 (or if you have enabled
+upgrade Libav's license to LGPL version 3 (or if you have enabled
 GPL components, GPL version 3) to use it.
 
 
@@ -37,7 +37,7 @@ You can use the @code{-formats} and @code{-codecs} options to have an exhaustive
 
 @section File Formats
 
-FFmpeg supports the following file formats through the @code{libavformat}
+Libav supports the following file formats through the @code{libavformat}
 library:
 
 @multitable @columnfractions .4 .1 .1 .4
@@ -751,18 +751,18 @@ Using a cross-compiler is preferred for various reasons.
 
 @subsection DJGPP
 
-FFmpeg cannot be compiled because of broken system headers, add
+Libav cannot be compiled because of broken system headers, add
 @code{--extra-cflags=-U__STRICT_ANSI__} to the configure options as a
 workaround.
 
 @section OS/2
 
-For information about compiling FFmpeg on OS/2 see
+For information about compiling Libav on OS/2 see
 @url{http://www.edm2.com/index.php/FFmpeg}.
 
 @section Unix-like
 
-Some parts of FFmpeg cannot be built with version 2.15 of the GNU
+Some parts of Libav cannot be built with version 2.15 of the GNU
 assembler which is still provided by a few AMD64 distributions. To
 make sure your compiler really uses the required version of gas
 after a binutils upgrade, run:
@@ -777,7 +777,7 @@ to configure.
 
 @subsection BSD
 
-BSD make will not build FFmpeg, you need to install and use GNU Make
+BSD make will not build Libav, you need to install and use GNU Make
 (@file{gmake}).
 
 @subsubsection FreeBSD
@@ -790,7 +790,7 @@ getting the system headers fixed.
 
 @subsection (Open)Solaris
 
-GNU Make is required to build FFmpeg, so you have to invoke (@file{gmake}),
+GNU Make is required to build Libav, so you have to invoke (@file{gmake}),
 standard Solaris Make will not work. When building with a non-c99 front-end
 (gcc, generic suncc) add either @code{--extra-libs=/usr/lib/values-xpg6.o}
 or @code{--extra-libs=/usr/lib/64/values-xpg6.o} to the configure options
@@ -808,22 +808,22 @@ bash ./configure
 MacOS X on PowerPC or ARM (iPhone) requires a preprocessor from
 @url{http://github.com/yuvi/gas-preprocessor} to build the optimized
 assembler functions. Just download the Perl script and put it somewhere
-in your PATH, FFmpeg's configure will pick it up automatically.
+in your PATH, Libav's configure will pick it up automatically.
 
 @section Windows
 
-To get help and instructions for building FFmpeg under Windows, check out
+To get help and instructions for building Libav under Windows, check out
 the FFmpeg Windows Help Forum at
 @url{http://ffmpeg.arrozcru.org/}.
 
 @subsection Native Windows compilation
 
-FFmpeg can be built to run natively on Windows using the MinGW tools. Install
+Libav can be built to run natively on Windows using the MinGW tools. Install
 the latest versions of MSYS and MinGW from @url{http://www.mingw.org/}.
 You can find detailed installation
 instructions in the download section and the FAQ.
 
-FFmpeg does not build out-of-the-box with the packages the automated MinGW
+Libav does not build out-of-the-box with the packages the automated MinGW
 installer provides. It also requires coreutils to be installed and many other
 packages updated to the latest version. The minimum version for some packages
 are listed below:
@@ -835,7 +835,7 @@ are listed below:
 @item mingw-runtime 3.15
 @end itemize
 
-FFmpeg automatically passes @code{-fno-common} to the compiler to work around
+Libav automatically passes @code{-fno-common} to the compiler to work around
 a GCC bug (see @url{http://gcc.gnu.org/bugzilla/show_bug.cgi?id=37216}).
 
 Within the MSYS shell, configure and make with:
@@ -866,14 +866,14 @@ Edit the @file{bin/sdl-config} script so that it points to the correct prefix
 where SDL was installed. Verify that @file{sdl-config} can be launched from
 the MSYS command line.
 
-@item By using @code{./configure --enable-shared} when configuring FFmpeg,
+@item By using @code{./configure --enable-shared} when configuring Libav,
 you can build libavutil, libavcodec and libavformat as DLLs.
 
 @end itemize
 
 @subsection Microsoft Visual C++ compatibility
 
-As stated in the FAQ, FFmpeg will not compile under MSVC++. However, if you
+As stated in the FAQ, Libav will not compile under MSVC++. However, if you
 want to use the libav* libraries in your own applications, you can still
 compile those applications using MSVC++. But the libav* libraries you link
 to @emph{must} be built with MinGW. However, you will not be able to debug
@@ -881,13 +881,13 @@ inside the libav* libraries, since MSVC++ does not recognize the debug
 symbols generated by GCC.
 We strongly recommend you to move over from MSVC++ to MinGW tools.
 
-This description of how to use the FFmpeg libraries with MSVC++ is based on
+This description of how to use the Libav libraries with MSVC++ is based on
 Microsoft Visual C++ 2005 Express Edition. If you have a different version,
 you might have to modify the procedures slightly.
 
 @subsubsection Using static libraries
 
-Assuming you have just built and installed FFmpeg in @file{/usr/local}.
+Assuming you have just built and installed Libav in @file{/usr/local}.
 
 @enumerate
 
@@ -898,13 +898,13 @@ Application Wizard, uncheck the "Precompiled headers" option.
 @item Write the source code for your application, or, for testing, just
 copy the code from an existing sample application into the source file
 that MSVC++ has already created for you. For example, you can copy
-@file{libavformat/output-example.c} from the FFmpeg distribution.
+@file{libavformat/output-example.c} from the Libav distribution.
 
 @item Open the "Project / Properties" dialog box. In the "Configuration"
 combo box, select "All Configurations" so that the changes you make will
 affect both debug and release builds. In the tree view on the left hand
 side, select "C/C++ / General", then edit the "Additional Include
-Directories" setting to contain the path where the FFmpeg includes were
+Directories" setting to contain the path where the Libav includes were
 installed (i.e. @file{c:\msys\1.0\local\include}).
 Do not add MinGW's include directory here, or the include files will
 conflict with MSVC's.
@@ -912,7 +912,7 @@ conflict with MSVC's.
 @item Still in the "Project / Properties" dialog box, select
 "Linker / General" from the tree view and edit the
 "Additional Library Directories" setting to contain the @file{lib}
-directory where FFmpeg was installed (i.e. @file{c:\msys\1.0\local\lib}),
+directory where Libav was installed (i.e. @file{c:\msys\1.0\local\lib}),
 the directory where MinGW libs are installed (i.e. @file{c:\mingw\lib}),
 and the directory where MinGW's GCC libs are installed
 (i.e. @file{C:\mingw\lib\gcc\mingw32\4.2.1-sjlj}). Then select
@@ -929,13 +929,13 @@ set to "Multi-threaded DLL".
 
 @item Click "OK" to close the "Project / Properties" dialog box.
 
-@item MSVC++ lacks some C99 header files that are fundamental for FFmpeg.
+@item MSVC++ lacks some C99 header files that are fundamental for Libav.
 Get msinttypes from @url{http://code.google.com/p/msinttypes/downloads/list}
 and install it in MSVC++'s include directory
 (i.e. @file{C:\Program Files\Microsoft Visual Studio 8\VC\include}).
 
 @item MSVC++ also does not understand the @code{inline} keyword used by
-FFmpeg, so you must add this line before @code{#include}ing libav*:
+Libav, so you must add this line before @code{#include}ing libav*:
 @example
 #define inline _inline
 @end example
@@ -968,10 +968,10 @@ and run @file{c:\msys\1.0\msys.bat} from there.
 @item Within the MSYS shell, run @code{lib.exe}. If you get a help message
 from @file{Microsoft (R) Library Manager}, this means your environment
 variables are set up correctly, the @file{Microsoft (R) Library Manager}
-is on the path and will be used by FFmpeg to create
+is on the path and will be used by Libav to create
 MSVC++-compatible import libraries.
 
-@item Build FFmpeg with
+@item Build Libav with
 
 @example
 ./configure --enable-shared --enable-memalign-hack
@@ -1000,7 +1000,7 @@ of DLL files, but the ones that are actually used to run your application
 are the ones with a major version number in their filenames
 (i.e. @file{avcodec-51.dll}).
 
-FFmpeg headers do not declare global data for Windows DLLs through the usual
+Libav headers do not declare global data for Windows DLLs through the usual
 dllexport/dllimport interface. Such data will be exported properly while
 building, but to use them in your MSVC++ code you will have to edit the
 appropriate headers and mark the data as dllimport. For example, in
@@ -1014,14 +1014,14 @@ extern __declspec(dllimport) const AVPixFmtDescriptor av_pix_fmt_descriptors[];
 You must use the MinGW cross compilation tools available at
 @url{http://www.mingw.org/}.
 
-Then configure FFmpeg with the following options:
+Then configure Libav with the following options:
 @example
 ./configure --target-os=mingw32 --cross-prefix=i386-mingw32msvc-
 @end example
 (you can change the cross-prefix according to the prefix chosen for the
 MinGW tools).
 
-Then you can easily test FFmpeg with Wine
+Then you can easily test Libav with Wine
 (@url{http://www.winehq.com/}).
 
 @subsection Compilation under Cygwin
@@ -1055,7 +1055,7 @@ shared libraries:
 ./configure --enable-shared --disable-static --extra-cflags=-fno-reorder-functions
 @end example
 
-If you want to build FFmpeg with additional libraries, download Cygwin
+If you want to build Libav with additional libraries, download Cygwin
 "Devel" packages for Ogg and Vorbis from any Cygwin packages repository:
 @example
 libogg-devel, libvorbis-devel

doc/git-howto.txt

@@ -28,9 +28,9 @@ Consult these resources whenever you have problems, they are quite exhaustive.
 You do not need a special username or password.
 All you need is to provide a ssh public key to the Git server admin.
 
-What follows now is a basic introduction to Git and some FFmpeg-specific
+What follows now is a basic introduction to Git and some Libav-specific
 guidelines. Read it at least once, if you are granted commit privileges to the
-FFmpeg project you are expected to be familiar with these rules.
+Libav project you are expected to be familiar with these rules.
 
 
 
@@ -46,11 +46,11 @@ I. BASICS:
 
     git clone git://git.libav.org/libav.git <target>
 
-  This will put the FFmpeg sources into the directory <target>.
+  This will put the Libav sources into the directory <target>.
 
     git clone git@git.libav.org:libav.git <target>
 
-  This will put the FFmpeg sources into the directory <target> and let
+  This will put the Libav sources into the directory <target> and let
   you push back your changes to the remote repository.
 
 
@@ -72,7 +72,7 @@ I. BASICS:
 
   fetches the changes from the main repository and replays your local commits
   over it. This is required to keep all your local changes at the top of
-  FFmpeg's master tree. The master tree will reject pushes with merge commits.
+  Libav's master tree. The master tree will reject pushes with merge commits.
 
 
 3. Adding/removing files/directories:

doc/indevs.texi

 @chapter Input Devices
 @c man begin INPUT DEVICES
 
-Input devices are configured elements in FFmpeg which allow to access
+Input devices are configured elements in Libav which allow to access
 the data coming from a multimedia device attached to your system.
 
-When you configure your FFmpeg build, all the supported input devices
+When you configure your Libav build, all the supported input devices
 are enabled by default. You can list all available ones using the
 configure option "--list-indevs".
 
@@ -70,7 +70,7 @@ A JACK input device creates one or more JACK writable clients, one for
 each audio channel, with name @var{client_name}:input_@var{N}, where
 @var{client_name} is the name provided by the application, and @var{N}
 is a number which identifies the channel.
-Each writable client will send the acquired data to the FFmpeg input
+Each writable client will send the acquired data to the Libav input
 device.
 
 Once you have created one or more JACK readable clients, you need to

doc/issue_tracker.txt

-FFmpeg's bug/patch/feature request tracker manual
-=================================================
+Libav's bug/patch/feature request tracker manual
+================================================
 
 NOTE: This is a draft.
 
 Overview:
 ---------
-FFmpeg uses Roundup for tracking issues, new issues and changes to
+Libav uses Roundup for tracking issues, new issues and changes to
 existing issues can be done through a web interface and through email.
 It is possible to subscribe to individual issues by adding yourself to the
 nosy list or to subscribe to the ffmpeg-issues mailing list which receives
@@ -60,7 +60,7 @@ critical
     No feature request can be critical.
 
 important
-    Bugs which make FFmpeg unusable for a significant number of users, and
+    Bugs which make Libav unusable for a significant number of users, and
     patches fixing them.
     Examples here might be completely broken MPEG-4 decoding or a build issue
     on Linux.
@@ -81,7 +81,7 @@ minor
 wish
     Something that is desirable to have but that there is no urgency at
     all to implement, e.g. something completely cosmetic like a website
-    restyle or a personalized doxy template or the FFmpeg logo.
+    restyle or a personalized doxy template or the Libav logo.
     This priority is not valid for bugs.
 
 

doc/libavfilter.texi

@@ -11,10 +11,10 @@
 
 @chapter Introduction
 
-Libavfilter is the filtering API of FFmpeg. It is the substitute of the
+Libavfilter is the filtering API of Libav. It is the substitute of the
 now deprecated 'vhooks' and started as a Google Summer of Code project.
 
-Integrating libavfilter into the main FFmpeg repository is a work in
+Integrating libavfilter into the main Libav repository is a work in
 progress. If you wish to try the unfinished development code of
 libavfilter then check it out from the libavfilter repository into
 some directory of your choice by:
@@ -74,7 +74,7 @@ not have video output.
 
 @chapter graph2dot
 
-The @file{graph2dot} program included in the FFmpeg @file{tools}
+The @file{graph2dot} program included in the Libav @file{tools}
 directory can be used to parse a filter graph description and issue a
 corresponding textual representation in the dot language.
 

doc/metadata.texi

 @chapter Metadata
 @c man begin METADATA
 
-FFmpeg is able to dump metadata from media files into a simple UTF-8-encoded
+Libav is able to dump metadata from media files into a simple UTF-8-encoded
 INI-like text file and then load it back using the metadata muxer/demuxer.
 
 The file format is as follows:
@@ -53,7 +53,7 @@ A ffmetadata file might look like this:
 ;FFMETADATA1
 title=bike\\shed
 ;this is a comment
-artist=FFmpeg troll team
+artist=Libav troll team
 
 [CHAPTER]
 TIMEBASE=1/1000

doc/multithreading.txt

-FFmpeg multithreading methods
+Libav multithreading methods
 ==============================================
 
-FFmpeg provides two methods for multithreading codecs.
+Libav provides two methods for multithreading codecs.
 
 Slice threading decodes multiple parts of a frame at the same time, using
 AVCodecContext execute() and execute2().

doc/muxers.texi

 @chapter Muxers
 @c man begin MUXERS
 
-Muxers are configured elements in FFmpeg which allow writing
+Muxers are configured elements in Libav which allow writing
 multimedia streams to a particular type of file.
 
-When you configure your FFmpeg build, all the supported muxers
+When you configure your Libav build, all the supported muxers
 are enabled by default. You can list all available muxers using the
 configure option @code{--list-muxers}.
 

doc/optimization.txt

@@ -17,7 +17,7 @@ Understanding these overoptimized functions:
 As many functions tend to be a bit difficult to understand because
 of optimizations, it can be hard to optimize them further, or write
 architecture-specific versions. It is recommended to look at older
-revisions of the interesting files (web frontends for the various FFmpeg
+revisions of the interesting files (web frontends for the various Libav
 branches are listed at http://libav.org/download.html).
 Alternatively, look into the other architecture-specific versions in
 the x86/, ppc/, alpha/ subdirectories. Even if you don't exactly
@@ -201,7 +201,7 @@ Inline asm vs. external asm
 ---------------------------
 Both inline asm (__asm__("..") in a .c file, handled by a compiler such as gcc)
 and external asm (.s or .asm files, handled by an assembler such as yasm/nasm)
-are accepted in FFmpeg. Which one to use differs per specific case.
+are accepted in Libav. Which one to use differs per specific case.
 
 - if your code is intended to be inlined in a C function, inline asm is always
    better, because external asm cannot be inlined

doc/outdevs.texi

 @chapter Output Devices
 @c man begin OUTPUT DEVICES
 
-Output devices are configured elements in FFmpeg which allow to write
+Output devices are configured elements in Libav which allow to write
 multimedia data to an output device attached to your system.
 
-When you configure your FFmpeg build, all the supported output devices
+When you configure your Libav build, all the supported output devices
 are enabled by default. You can list all available ones using the
 configure option "--list-outdevs".
 

doc/protocols.texi

 @chapter Protocols
 @c man begin PROTOCOLS
 
-Protocols are configured elements in FFmpeg which allow to access
+Protocols are configured elements in Libav which allow to access
 resources which require the use of a particular protocol.
 
-When you configure your FFmpeg build, all the supported protocols are
+When you configure your Libav build, all the supported protocols are
 enabled by default. You can list all available ones using the
 configure option "--list-protocols".
 

doc/soc.txt

@@ -8,9 +8,9 @@ it's a little late for this year's soc (2006).
 
 The Goal:
 Our goal in respect to soc is and must be of course exactly one thing and
-that is to improve FFmpeg, to reach this goal, code must
+that is to improve Libav, to reach this goal, code must
 * conform to the development policy and patch submission guidelines
-* must improve FFmpeg somehow (faster, smaller, "better",
+* must improve Libav somehow (faster, smaller, "better",
   more codecs supported, fewer bugs, cleaner, ...)
 
 for mentors and other developers to help students to reach that goal it is
@@ -20,5 +20,5 @@ easy reviewable that again leads us to:
 * separation of cosmetic from non-cosmetic changes (this is almost entirely
   ignored by mentors and students in soc 2006 which might lead to a suprise
   when the code will be reviewed at the end before a possible inclusion in
-  FFmpeg, individual changes were generally not reviewable due to cosmetics).
+  Libav, individual changes were generally not reviewable due to cosmetics).
 * frequent commits, so that comments can be provided early