Skip to content

F
ffmpeg.wasm-core
Commit aa47c35d authored by Justin Ruggles's avatar Justin Ruggles
Browse files
Options

ac3enc: add support for E-AC-3 encoding. 

This adds basic stream format support and allows for arbitrary bit rates
rather than just those supported in AC-3.
parent b1bf8c78
Show whitespace changes
Inline Side-by-side
Showing with 309 additions and 25 deletions
Changelog
View file @ aa47c35d
......@@ -4,6 +4,8 @@ releases are sorted from youngest to oldest.
version <next>:
- E-AC-3 audio encoder
version 0.7_beta2:
......
configure
View file @ aa47c35d
......@@ -1261,6 +1261,7 @@ dca_decoder_select="mdct"
dnxhd_encoder_select="aandct"
dxa_decoder_select="zlib"
eac3_decoder_select="ac3_decoder"
eac3_encoder_select="mdct ac3dsp"
eamad_decoder_select="aandct"
eatgq_decoder_select="aandct"
eatqi_decoder_select="aandct"
......
doc/general.texi
View file @ aa47c35d
......@@ -614,7 +614,7 @@ following image formats are supported:
@tab Used in Origin's Wing Commander IV AVI files.
@item DSP Group TrueSpeech @tab @tab X
@item DV audio @tab @tab X
@item Enhanced AC-3 @tab @tab X
@item Enhanced AC-3 @tab X @tab X
@item FLAC (Free Lossless Audio Codec) @tab X @tab IX
@item GSM @tab E @tab X
@tab encoding supported through external library libgsm
......
libavcodec/Makefile
View file @ aa47c35d
......@@ -124,6 +124,7 @@ OBJS-$(CONFIG_DVVIDEO_DECODER) += dv.o dvdata.o
OBJS-$(CONFIG_DVVIDEO_ENCODER) += dv.o dvdata.o
OBJS-$(CONFIG_DXA_DECODER) += dxa.o
OBJS-$(CONFIG_EAC3_DECODER) += eac3dec.o eac3dec_data.o
OBJS-$(CONFIG_EAC3_ENCODER) += ac3enc_float.o ac3tab.o ac3.o kbdwin.o
OBJS-$(CONFIG_EACMV_DECODER) += eacmv.o
OBJS-$(CONFIG_EAMAD_DECODER) += eamad.o eaidct.o mpeg12.o \
mpeg12data.o mpegvideo.o \
......
libavcodec/ac3enc.c
View file @ aa47c35d
......@@ -147,6 +147,7 @@ typedef struct AC3EncodeContext {
AC3Block blocks[AC3_MAX_BLOCKS]; ///< per-block info
int eac3; ///< indicates if this is E-AC-3 vs. AC-3
int bitstream_id; ///< bitstream id (bsid)
int bitstream_mode; ///< bitstream mode (bsmod)
......@@ -157,8 +158,8 @@ typedef struct AC3EncodeContext {
int frame_size; ///< current frame size in bytes
int frame_size_code; ///< frame size code (frmsizecod)
uint16_t crc_inv[2];
int bits_written; ///< bit count (used to avg. bitrate)
int samples_written; ///< sample count (used to avg. bitrate)
int64_t bits_written; ///< bit count (used to avg. bitrate)
int64_t samples_written; ///< sample count (used to avg. bitrate)
int fbw_channels; ///< number of full-bandwidth channels (nfchans)
int channels; ///< total number of channels (nchans)
......@@ -247,15 +248,20 @@ static const float extmixlev_options[EXTMIXLEV_NUM_OPTIONS] = {
#define OFFSET(param) offsetof(AC3EncodeContext, options.param)
#define AC3ENC_PARAM (AV_OPT_FLAG_AUDIO_PARAM | AV_OPT_FLAG_ENCODING_PARAM)
#define AC3ENC_TYPE_AC3_FIXED 0
#define AC3ENC_TYPE_AC3 1
#define AC3ENC_TYPE_EAC3 2
#if CONFIG_AC3ENC_FLOAT
#define AC3ENC_TYPE AC3ENC_TYPE_AC3
#include "ac3enc_opts_template.c"
static AVClass ac3enc_class = { "AC-3 Encoder", av_default_item_name,
ac3_options, LIBAVUTIL_VERSION_INT };
#undef AC3ENC_TYPE
#define AC3ENC_TYPE AC3ENC_TYPE_EAC3
#include "ac3enc_opts_template.c"
static AVClass eac3enc_class = { "E-AC-3 Encoder", av_default_item_name,
eac3_options, LIBAVUTIL_VERSION_INT };
#else
#define AC3ENC_TYPE AC3ENC_TYPE_AC3_FIXED
#include "ac3enc_opts_template.c"
......@@ -387,7 +393,7 @@ static const int8_t ac3_coupling_start_tab[6][3][19] = {
/**
* Adjust the frame size to make the average bit rate match the target bit rate.
* This is only needed for 11025, 22050, and 44100 sample rates.
* This is only needed for 11025, 22050, and 44100 sample rates or any E-AC-3.
*/
static void adjust_frame_size(AC3EncodeContext *s)
{
......@@ -734,6 +740,35 @@ static void apply_channel_coupling(AC3EncodeContext *s)
}
}
}
if (s->eac3) {
/* set first cpl coords */
int first_cpl_coords[AC3_MAX_CHANNELS];
for (ch = 1; ch <= s->fbw_channels; ch++)
first_cpl_coords[ch] = 1;
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) {
AC3Block *block = &s->blocks[blk];
for (ch = 1; ch <= s->fbw_channels; ch++) {
if (block->channel_in_cpl[ch]) {
if (first_cpl_coords[ch]) {
block->new_cpl_coords = 2;
first_cpl_coords[ch] = 0;
}
} else {
first_cpl_coords[ch] = 1;
}
}
}
/* set first cpl leak */
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) {
AC3Block *block = &s->blocks[blk];
if (block->cpl_in_use) {
block->new_cpl_leak = 2;
break;
}
}
}
#endif /* CONFIG_AC3ENC_FLOAT */
}
......@@ -1151,23 +1186,50 @@ static void count_frame_bits_fixed(AC3EncodeContext *s)
* no delta bit allocation
* no skipped data
* no auxilliary data
* no E-AC-3 metadata
*/
/* header */
frame_bits = 65;
frame_bits = 16; /* sync info */
if (s->eac3) {
/* bitstream info header */
frame_bits += 35;
frame_bits += 1 + 1 + 1;
/* audio frame header */
frame_bits += 2;
frame_bits += 10;
/* exponent strategy */
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++)
frame_bits += 2 * s->fbw_channels + s->lfe_on;
/* converter exponent strategy */
frame_bits += s->fbw_channels * 5;
/* snr offsets */
frame_bits += 10;
/* block start info */
frame_bits++;
} else {
frame_bits += 49;
frame_bits += frame_bits_inc[s->channel_mode];
}
/* audio blocks */
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) {
if (!s->eac3) {
/* block switch flags */
frame_bits += s->fbw_channels;
/* dither flags */
frame_bits += s->fbw_channels;
}
/* dynamic range */
frame_bits++;
/* spectral extension */
if (s->eac3)
frame_bits++;
if (!s->eac3) {
/* exponent strategy */
frame_bits += 2 * s->fbw_channels;
if (s->lfe_on)
......@@ -1177,13 +1239,20 @@ static void count_frame_bits_fixed(AC3EncodeContext *s)
frame_bits++;
if (!blk)
frame_bits += 2 + 2 + 2 + 2 + 3;
}
/* converter snr offset */
if (s->eac3)
frame_bits++;
if (!s->eac3) {
/* delta bit allocation */
frame_bits++;
/* skipped data */
frame_bits++;
}
}
/* auxiliary data */
frame_bits++;
......@@ -1207,7 +1276,7 @@ static void bit_alloc_init(AC3EncodeContext *s)
s->slow_decay_code = 2;
s->fast_decay_code = 1;
s->slow_gain_code = 1;
s->db_per_bit_code = 3;
s->db_per_bit_code = s->eac3 ? 2 : 3;
s->floor_code = 7;
for (ch = 0; ch <= s->channels; ch++)
s->fast_gain_code[ch] = 4;
......@@ -1242,6 +1311,21 @@ static void count_frame_bits(AC3EncodeContext *s)
int frame_bits = 0;
/* header */
if (s->eac3) {
/* coupling */
if (s->channel_mode > AC3_CHMODE_MONO) {
frame_bits++;
for (blk = 1; blk < AC3_MAX_BLOCKS; blk++) {
AC3Block *block = &s->blocks[blk];
frame_bits++;
if (block->new_cpl_strategy)
frame_bits++;
}
}
/* coupling exponent strategy */
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++)
frame_bits += 2 * s->blocks[blk].cpl_in_use;
} else {
if (opt->audio_production_info)
frame_bits += 7;
if (s->bitstream_id == 6) {
......@@ -1250,20 +1334,29 @@ static void count_frame_bits(AC3EncodeContext *s)
if (opt->extended_bsi_2)
frame_bits += 14;
}
}
/* audio blocks */
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) {
AC3Block *block = &s->blocks[blk];
/* coupling strategy */
if (!s->eac3)
frame_bits++;
if (block->new_cpl_strategy) {
if (!s->eac3)
frame_bits++;
if (block->cpl_in_use) {
if (s->eac3)
frame_bits++;
if (!s->eac3 || s->channel_mode != AC3_CHMODE_STEREO)
frame_bits += s->fbw_channels;
if (s->channel_mode == AC3_CHMODE_STEREO)
frame_bits++;
frame_bits += 4 + 4;
if (s->eac3)
frame_bits++;
else
frame_bits += s->num_cpl_subbands - 1;
}
}
......@@ -1272,6 +1365,7 @@ static void count_frame_bits(AC3EncodeContext *s)
if (block->cpl_in_use) {
for (ch = 1; ch <= s->fbw_channels; ch++) {
if (block->channel_in_cpl[ch]) {
if (!s->eac3 || block->new_cpl_coords != 2)
frame_bits++;
if (block->new_cpl_coords) {
frame_bits += 2;
......@@ -1283,6 +1377,7 @@ static void count_frame_bits(AC3EncodeContext *s)
/* stereo rematrixing */
if (s->channel_mode == AC3_CHMODE_STEREO) {
if (!s->eac3 || blk > 0)
frame_bits++;
if (s->blocks[blk].new_rematrixing_strategy)
frame_bits += block->num_rematrixing_bands;
......@@ -1298,16 +1393,19 @@ static void count_frame_bits(AC3EncodeContext *s)
}
/* coupling exponent strategy */
if (block->cpl_in_use)
if (!s->eac3 && block->cpl_in_use)
frame_bits += 2;
/* snr offsets and fast gain codes */
if (!s->eac3) {
frame_bits++;
if (block->new_snr_offsets)
frame_bits += 6 + (s->channels + block->cpl_in_use) * (4 + 3);
}
/* coupling leak info */
if (block->cpl_in_use) {
if (!s->eac3 || block->new_cpl_leak != 2)
frame_bits++;
if (block->new_cpl_leak)
frame_bits += 3 + 3;
......@@ -1736,7 +1834,7 @@ static void quantize_mantissas(AC3EncodeContext *s)
/**
* Write the AC-3 frame header to the output bitstream.
*/
static void output_frame_header(AC3EncodeContext *s)
static void ac3_output_frame_header(AC3EncodeContext *s)
{
AC3EncOptions *opt = &s->options;
......@@ -1789,6 +1887,79 @@ static void output_frame_header(AC3EncodeContext *s)
}
/**
* Write the E-AC-3 frame header to the output bitstream.
*/
static void eac3_output_frame_header(AC3EncodeContext *s)
{
int blk, ch;
AC3EncOptions *opt = &s->options;
put_bits(&s->pb, 16, 0x0b77); /* sync word */
/* BSI header */
put_bits(&s->pb, 2, 0); /* stream type = independent */
put_bits(&s->pb, 3, 0); /* substream id = 0 */
put_bits(&s->pb, 11, (s->frame_size / 2) - 1); /* frame size */
if (s->bit_alloc.sr_shift) {
put_bits(&s->pb, 2, 0x3); /* fscod2 */
put_bits(&s->pb, 2, s->bit_alloc.sr_code); /* sample rate code */
} else {
put_bits(&s->pb, 2, s->bit_alloc.sr_code); /* sample rate code */
put_bits(&s->pb, 2, 0x3); /* number of blocks = 6 */
}
put_bits(&s->pb, 3, s->channel_mode); /* audio coding mode */
put_bits(&s->pb, 1, s->lfe_on); /* LFE channel indicator */
put_bits(&s->pb, 5, s->bitstream_id); /* bitstream id (EAC3=16) */
put_bits(&s->pb, 5, -opt->dialogue_level); /* dialogue normalization level */
put_bits(&s->pb, 1, 0); /* no compression gain */
put_bits(&s->pb, 1, 0); /* no mixing metadata */
/* TODO: mixing metadata */
put_bits(&s->pb, 1, 0); /* no info metadata */
/* TODO: info metadata */
put_bits(&s->pb, 1, 0); /* no additional bit stream info */
/* frame header */
put_bits(&s->pb, 1, 1); /* exponent strategy syntax = each block */
put_bits(&s->pb, 1, 0); /* aht enabled = no */
put_bits(&s->pb, 2, 0); /* snr offset strategy = 1 */
put_bits(&s->pb, 1, 0); /* transient pre-noise processing enabled = no */
put_bits(&s->pb, 1, 0); /* block switch syntax enabled = no */
put_bits(&s->pb, 1, 0); /* dither flag syntax enabled = no */
put_bits(&s->pb, 1, 0); /* bit allocation model syntax enabled = no */
put_bits(&s->pb, 1, 0); /* fast gain codes enabled = no */
put_bits(&s->pb, 1, 0); /* dba syntax enabled = no */
put_bits(&s->pb, 1, 0); /* skip field syntax enabled = no */
put_bits(&s->pb, 1, 0); /* spx enabled = no */
/* coupling strategy use flags */
if (s->channel_mode > AC3_CHMODE_MONO) {
put_bits(&s->pb, 1, s->blocks[0].cpl_in_use);
for (blk = 1; blk < AC3_MAX_BLOCKS; blk++) {
AC3Block *block = &s->blocks[blk];
put_bits(&s->pb, 1, block->new_cpl_strategy);
if (block->new_cpl_strategy)
put_bits(&s->pb, 1, block->cpl_in_use);
}
}
/* exponent strategy */
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++)
for (ch = !s->blocks[blk].cpl_in_use; ch <= s->fbw_channels; ch++)
put_bits(&s->pb, 2, s->exp_strategy[ch][blk]);
if (s->lfe_on) {
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++)
put_bits(&s->pb, 1, s->exp_strategy[s->lfe_channel][blk]);
}
/* E-AC-3 to AC-3 converter exponent strategy (unfortunately not optional...) */
for (ch = 1; ch <= s->fbw_channels; ch++)
put_bits(&s->pb, 5, 0);
/* snr offsets */
put_bits(&s->pb, 6, s->coarse_snr_offset);
put_bits(&s->pb, 4, s->fine_snr_offset[1]);
/* block start info */
put_bits(&s->pb, 1, 0);
}
/**
* Write one audio block to the output bitstream.
*/
......@@ -1799,39 +1970,59 @@ static void output_audio_block(AC3EncodeContext *s, int blk)
AC3Block *block = &s->blocks[blk];
/* block switching */
if (!s->eac3) {
for (ch = 0; ch < s->fbw_channels; ch++)
put_bits(&s->pb, 1, 0);
}
/* dither flags */
if (!s->eac3) {
for (ch = 0; ch < s->fbw_channels; ch++)
put_bits(&s->pb, 1, 1);
}
/* dynamic range codes */
put_bits(&s->pb, 1, 0);
/* spectral extension */
if (s->eac3)
put_bits(&s->pb, 1, 0);
/* channel coupling */
if (!s->eac3)
put_bits(&s->pb, 1, block->new_cpl_strategy);
if (block->new_cpl_strategy) {
if (!s->eac3)
put_bits(&s->pb, 1, block->cpl_in_use);
if (block->cpl_in_use) {
int start_sub, end_sub;
if (s->eac3)
put_bits(&s->pb, 1, 0); /* enhanced coupling */
if (!s->eac3 || s->channel_mode != AC3_CHMODE_STEREO) {
for (ch = 1; ch <= s->fbw_channels; ch++)
put_bits(&s->pb, 1, block->channel_in_cpl[ch]);
}
if (s->channel_mode == AC3_CHMODE_STEREO)
put_bits(&s->pb, 1, 0); /* phase flags in use */
start_sub = (s->start_freq[CPL_CH] - 37) / 12;
end_sub = (s->cpl_end_freq - 37) / 12;
put_bits(&s->pb, 4, start_sub);
put_bits(&s->pb, 4, end_sub - 3);
/* coupling band structure */
if (s->eac3) {
put_bits(&s->pb, 1, 0); /* use default */
} else {
for (bnd = start_sub+1; bnd < end_sub; bnd++)
put_bits(&s->pb, 1, ff_eac3_default_cpl_band_struct[bnd]);
}
}
}
/* coupling coordinates */
if (block->cpl_in_use) {
for (ch = 1; ch <= s->fbw_channels; ch++) {
if (block->channel_in_cpl[ch]) {
if (!s->eac3 || block->new_cpl_coords != 2)
put_bits(&s->pb, 1, block->new_cpl_coords);
if (block->new_cpl_coords) {
put_bits(&s->pb, 2, block->cpl_master_exp[ch]);
......@@ -1846,6 +2037,7 @@ static void output_audio_block(AC3EncodeContext *s, int blk)
/* stereo rematrixing */
if (s->channel_mode == AC3_CHMODE_STEREO) {
if (!s->eac3 || blk > 0)
put_bits(&s->pb, 1, block->new_rematrixing_strategy);
if (block->new_rematrixing_strategy) {
/* rematrixing flags */
......@@ -1855,10 +2047,12 @@ static void output_audio_block(AC3EncodeContext *s, int blk)
}
/* exponent strategy */
if (!s->eac3) {
for (ch = !block->cpl_in_use; ch <= s->fbw_channels; ch++)
put_bits(&s->pb, 2, s->exp_strategy[ch][blk]);
if (s->lfe_on)
put_bits(&s->pb, 1, s->exp_strategy[s->lfe_channel][blk]);
}
/* bandwidth */
for (ch = 1; ch <= s->fbw_channels; ch++) {
......@@ -1888,6 +2082,7 @@ static void output_audio_block(AC3EncodeContext *s, int blk)
}
/* bit allocation info */
if (!s->eac3) {
baie = (blk == 0);
put_bits(&s->pb, 1, baie);
if (baie) {
......@@ -1897,8 +2092,10 @@ static void output_audio_block(AC3EncodeContext *s, int blk)
put_bits(&s->pb, 2, s->db_per_bit_code);
put_bits(&s->pb, 3, s->floor_code);
}
}
/* snr offset */
if (!s->eac3) {
put_bits(&s->pb, 1, block->new_snr_offsets);
if (block->new_snr_offsets) {
put_bits(&s->pb, 6, s->coarse_snr_offset);
......@@ -1907,9 +2104,13 @@ static void output_audio_block(AC3EncodeContext *s, int blk)
put_bits(&s->pb, 3, s->fast_gain_code[ch]);
}
}
} else {
put_bits(&s->pb, 1, 0); /* no converter snr offset */
}
/* coupling leak */
if (block->cpl_in_use) {
if (!s->eac3 || block->new_cpl_leak != 2)
put_bits(&s->pb, 1, block->new_cpl_leak);
if (block->new_cpl_leak) {
put_bits(&s->pb, 3, s->bit_alloc.cpl_fast_leak);
......@@ -1917,8 +2118,10 @@ static void output_audio_block(AC3EncodeContext *s, int blk)
}
}
if (!s->eac3) {
put_bits(&s->pb, 1, 0); /* no delta bit allocation */
put_bits(&s->pb, 1, 0); /* no data to skip */
}
/* mantissas */
got_cpl = !block->cpl_in_use;
......@@ -2007,6 +2210,10 @@ static void output_frame_end(AC3EncodeContext *s)
if (pad_bytes > 0)
memset(put_bits_ptr(&s->pb), 0, pad_bytes);
if (s->eac3) {
/* compute crc2 */
crc2_partial = av_crc(crc_ctx, 0, frame + 2, s->frame_size - 5);
} else {
/* compute crc1 */
/* this is not so easy because it is at the beginning of the data... */
crc1 = av_bswap16(av_crc(crc_ctx, 0, frame + 4, frame_size_58 - 4));
......@@ -2017,6 +2224,7 @@ static void output_frame_end(AC3EncodeContext *s)
/* compute crc2 */
crc2_partial = av_crc(crc_ctx, 0, frame + frame_size_58,
s->frame_size - frame_size_58 - 3);
}
crc2 = av_crc(crc_ctx, crc2_partial, frame + s->frame_size - 3, 1);
/* ensure crc2 does not match sync word by flipping crcrsv bit if needed */
if (crc2 == 0x770B) {
......@@ -2037,7 +2245,10 @@ static void output_frame(AC3EncodeContext *s, unsigned char *frame)
init_put_bits(&s->pb, frame, AC3_MAX_CODED_FRAME_SIZE);
output_frame_header(s);
if (s->eac3)
eac3_output_frame_header(s);
else
ac3_output_frame_header(s);
for (blk = 0; blk < AC3_MAX_BLOCKS; blk++)
output_audio_block(s, blk);
......@@ -2058,6 +2269,7 @@ static void dprint_options(AVCodecContext *avctx)
case 8: av_strlcpy(strbuf, "AC-3 (standard)", 32); break;
case 9: av_strlcpy(strbuf, "AC-3 (dnet half-rate)", 32); break;
case 10: av_strlcpy(strbuf, "AC-3 (dnet quater-rate", 32); break;
case 16: av_strlcpy(strbuf, "E-AC-3 (enhanced)", 32); break;
default: snprintf(strbuf, 32, "ERROR");
}
av_dlog(avctx, "bitstream_id: %s (%d)\n", strbuf, s->bitstream_id);
......@@ -2318,13 +2530,13 @@ static int ac3_encode_frame(AVCodecContext *avctx, unsigned char *frame,
const SampleType *samples = data;
int ret;
if (s->options.allow_per_frame_metadata) {
if (!s->eac3 && s->options.allow_per_frame_metadata) {
ret = validate_metadata(avctx);
if (ret)
return ret;
}
if (s->bit_alloc.sr_code == 1)
if (s->bit_alloc.sr_code == 1 || s->eac3)
adjust_frame_size(s);
deinterleave_input_samples(s, samples);
......@@ -2450,7 +2662,7 @@ static av_cold int set_channel_info(AC3EncodeContext *s, int channels,
static av_cold int validate_options(AVCodecContext *avctx, AC3EncodeContext *s)
{
int i, ret;
int i, ret, max_sr;
/* validate channel layout */
if (!avctx->channel_layout) {
......@@ -2465,20 +2677,59 @@ static av_cold int validate_options(AVCodecContext *avctx, AC3EncodeContext *s)
}
/* validate sample rate */
for (i = 0; i < 9; i++) {
if ((ff_ac3_sample_rate_tab[i / 3] >> (i % 3)) == avctx->sample_rate)
/* note: max_sr could be changed from 2 to 5 for E-AC-3 once we find a
decoder that supports half sample rate so we can validate that
the generated files are correct. */
max_sr = s->eac3 ? 2 : 8;
for (i = 0; i <= max_sr; i++) {
if ((ff_ac3_sample_rate_tab[i % 3] >> (i / 3)) == avctx->sample_rate)
break;
}
if (i == 9) {
if (i > max_sr) {
av_log(avctx, AV_LOG_ERROR, "invalid sample rate\n");
return AVERROR(EINVAL);
}
s->sample_rate = avctx->sample_rate;
s->bit_alloc.sr_shift = i % 3;
s->bit_alloc.sr_code = i / 3;
s->bitstream_id = 8 + s->bit_alloc.sr_shift;
s->bit_alloc.sr_shift = i / 3;
s->bit_alloc.sr_code = i % 3;
s->bitstream_id = s->eac3 ? 16 : 8 + s->bit_alloc.sr_shift;
/* validate bit rate */
if (s->eac3) {
int max_br, min_br, wpf, min_br_dist, min_br_code;
/* calculate min/max bitrate */
max_br = 2048 * s->sample_rate / AC3_FRAME_SIZE * 16;
min_br = ((s->sample_rate + (AC3_FRAME_SIZE-1)) / AC3_FRAME_SIZE) * 16;
if (avctx->bit_rate < min_br || avctx->bit_rate > max_br) {
av_log(avctx, AV_LOG_ERROR, "invalid bit rate. must be %d to %d "
"for this sample rate\n", min_br, max_br);
return AVERROR(EINVAL);
}
/* calculate words-per-frame for the selected bitrate */
wpf = (avctx->bit_rate / 16) * AC3_FRAME_SIZE / s->sample_rate;
av_assert1(wpf > 0 && wpf <= 2048);
/* find the closest AC-3 bitrate code to the selected bitrate.
this is needed for lookup tables for bandwidth and coupling
parameter selection */
min_br_code = -1;
min_br_dist = INT_MAX;
for (i = 0; i < 19; i++) {
int br_dist = abs(ff_ac3_bitrate_tab[i] * 1000 - avctx->bit_rate);
if (br_dist < min_br_dist) {
min_br_dist = br_dist;
min_br_code = i;
}
}
/* make sure the minimum frame size is below the average frame size */
s->frame_size_code = min_br_code << 1;
while (wpf > 1 && wpf * s->sample_rate / AC3_FRAME_SIZE * 16 > avctx->bit_rate)
wpf--;
s->frame_size_min = 2 * wpf;
} else {
for (i = 0; i < 19; i++) {
if ((ff_ac3_bitrate_tab[i] >> s->bit_alloc.sr_shift)*1000 == avctx->bit_rate)
break;
......@@ -2487,8 +2738,11 @@ static av_cold int validate_options(AVCodecContext *avctx, AC3EncodeContext *s)
av_log(avctx, AV_LOG_ERROR, "invalid bit rate\n");
return AVERROR(EINVAL);
}
s->bit_rate = avctx->bit_rate;
s->frame_size_code = i << 1;
s->frame_size_min = 2 * ff_ac3_frame_size_tab[s->frame_size_code][s->bit_alloc.sr_code];
}
s->bit_rate = avctx->bit_rate;
s->frame_size = s->frame_size_min;
/* validate cutoff */
if (avctx->cutoff < 0) {
......@@ -2511,9 +2765,11 @@ static av_cold int validate_options(AVCodecContext *avctx, AC3EncodeContext *s)
return AVERROR(EINVAL);
}
if (!s->eac3) {
ret = validate_metadata(avctx);
if (ret)
return ret;
}
s->rematrixing_enabled = s->options.stereo_rematrixing &&
(s->channel_mode == AC3_CHMODE_STEREO);
......@@ -2713,6 +2969,8 @@ static av_cold int ac3_encode_init(AVCodecContext *avctx)
AC3EncodeContext *s = avctx->priv_data;
int ret, frame_size_58;
s->eac3 = avctx->codec_id == CODEC_ID_EAC3;
avctx->frame_size = AC3_FRAME_SIZE;
ff_ac3_common_init();
......@@ -2725,10 +2983,8 @@ static av_cold int ac3_encode_init(AVCodecContext *avctx)
if (s->bitstream_mode == AV_AUDIO_SERVICE_TYPE_KARAOKE)
s->bitstream_mode = 0x7;
s->frame_size_min = 2 * ff_ac3_frame_size_tab[s->frame_size_code][s->bit_alloc.sr_code];
s->bits_written = 0;
s->samples_written = 0;
s->frame_size = s->frame_size_min;
/* calculate crc_inv for both possible frame sizes */
frame_size_58 = (( s->frame_size >> 2) + ( s->frame_size >> 4)) << 1;
......
libavcodec/ac3enc_float.c
View file @ aa47c35d
......@@ -100,6 +100,7 @@ static void scale_coefficients(AC3EncodeContext *s)
}
#if CONFIG_AC3_ENCODER
AVCodec ff_ac3_encoder = {
"ac3",
AVMEDIA_TYPE_AUDIO,
......@@ -114,3 +115,20 @@ AVCodec ff_ac3_encoder = {
.priv_class = &ac3enc_class,
.channel_layouts = ac3_channel_layouts,
};
#endif
#if CONFIG_EAC3_ENCODER
AVCodec ff_eac3_encoder = {
.name = "eac3",
.type = AVMEDIA_TYPE_AUDIO,
.id = CODEC_ID_EAC3,
.priv_data_size = sizeof(AC3EncodeContext),
.init = ac3_encode_init,
.encode = ac3_encode_frame,
.close = ac3_encode_close,
.sample_fmts = (const enum AVSampleFormat[]){AV_SAMPLE_FMT_FLT,AV_SAMPLE_FMT_NONE},
.long_name = NULL_IF_CONFIG_SMALL("ATSC A/52 E-AC-3"),
.priv_class = &eac3enc_class,
.channel_layouts = ac3_channel_layouts,
};
#endif
libavcodec/ac3enc_opts_template.c
View file @ aa47c35d
......@@ -23,7 +23,10 @@
static const AVOption ac3fixed_options[] = {
#elif AC3ENC_TYPE == AC3ENC_TYPE_AC3
static const AVOption ac3_options[] = {
#else /* AC3ENC_TYPE_EAC3 */
static const AVOption eac3_options[] = {
#endif
#if AC3ENC_TYPE != AC3ENC_TYPE_EAC3
/* Metadata Options */
{"per_frame_metadata", "Allow Changing Metadata Per-Frame", OFFSET(allow_per_frame_metadata), FF_OPT_TYPE_INT, {.dbl = 0 }, 0, 1, AC3ENC_PARAM},
/* downmix levels */
......@@ -37,7 +40,9 @@ static const AVOption ac3_options[] = {
{"small", "Small Room", 0, FF_OPT_TYPE_CONST, {.dbl = 2 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "room_type"},
/* other metadata options */
{"copyright", "Copyright Bit", OFFSET(copyright), FF_OPT_TYPE_INT, {.dbl = 0 }, 0, 1, AC3ENC_PARAM},
#endif
{"dialnorm", "Dialogue Level (dB)", OFFSET(dialogue_level), FF_OPT_TYPE_INT, {.dbl = -31 }, -31, -1, AC3ENC_PARAM},
#if AC3ENC_TYPE != AC3ENC_TYPE_EAC3
{"dsur_mode", "Dolby Surround Mode", OFFSET(dolby_surround_mode), FF_OPT_TYPE_INT, {.dbl = 0 }, 0, 2, AC3ENC_PARAM, "dsur_mode"},
{"notindicated", "Not Indicated (default)", 0, FF_OPT_TYPE_CONST, {.dbl = 0 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "dsur_mode"},
{"on", "Dolby Surround Encoded", 0, FF_OPT_TYPE_CONST, {.dbl = 1 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "dsur_mode"},
......@@ -63,6 +68,7 @@ static const AVOption ac3_options[] = {
{"ad_conv_type", "A/D Converter Type", OFFSET(ad_converter_type), FF_OPT_TYPE_INT, {.dbl = -1 }, -1, 1, AC3ENC_PARAM, "ad_conv_type"},
{"standard", "Standard (default)", 0, FF_OPT_TYPE_CONST, {.dbl = 0 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "ad_conv_type"},
{"hdcd", "HDCD", 0, FF_OPT_TYPE_CONST, {.dbl = 1 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "ad_conv_type"},
#endif
/* Other Encoding Options */
{"stereo_rematrixing", "Stereo Rematrixing", OFFSET(stereo_rematrixing), FF_OPT_TYPE_INT, {.dbl = 1 }, 0, 1, AC3ENC_PARAM},
#if AC3ENC_TYPE != AC3ENC_TYPE_AC3_FIXED
......
libavcodec/allcodecs.c
View file @ aa47c35d
......@@ -241,7 +241,7 @@ void avcodec_register_all(void)
REGISTER_DECODER (COOK, cook);
REGISTER_DECODER (DCA, dca);
REGISTER_DECODER (DSICINAUDIO, dsicinaudio);
REGISTER_DECODER (EAC3, eac3);
REGISTER_ENCDEC (EAC3, eac3);
REGISTER_ENCDEC (FLAC, flac);
REGISTER_DECODER (GSM, gsm);
REGISTER_DECODER (GSM_MS, gsm_ms);
......
libavcodec/version.h
View file @ aa47c35d
......@@ -21,7 +21,7 @@
#define AVCODEC_VERSION_H
#define LIBAVCODEC_VERSION_MAJOR 53
#define LIBAVCODEC_VERSION_MINOR 4
#define LIBAVCODEC_VERSION_MINOR 5
#define LIBAVCODEC_VERSION_MICRO 0
#define LIBAVCODEC_VERSION_INT AV_VERSION_INT(LIBAVCODEC_VERSION_MAJOR, \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment