Remove unused and non-compiling vestigial g729 decoder

libavcodec/acelp_vectors.c

@@ -48,26 +48,6 @@ const uint8_t ff_fc_2pulses_9bits_track1_gray[16] =
   28, 26,
 };
 
-const uint8_t ff_fc_2pulses_9bits_track2_gray[32] =
-{
-  0,  2,
-  5,  4,
-  12, 10,
-  7,  9,
-  25, 24,
-  20, 22,
-  14, 15,
-  19, 17,
-  36, 31,
-  21, 26,
-  1,  6,
-  16, 11,
-  27, 29,
-  32, 30,
-  39, 37,
-  34, 35,
-};
-
 const uint8_t ff_fc_4pulses_8bits_tracks_13[16] =
 {
   0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75,

libavcodec/acelp_vectors.h

@@ -81,37 +81,6 @@ extern const uint8_t ff_fc_4pulses_8bits_track_4[32];
 extern const uint8_t ff_fc_2pulses_9bits_track1[16];
 extern const uint8_t ff_fc_2pulses_9bits_track1_gray[16];
 
-/**
- * Track|Pulse|        Positions
- * -----------------------------------------
- *  2   | 1   | 0, 7, 14, 20, 27, 34,  1, 21
- *      |     | 2, 9, 15, 22, 29, 35,  6, 26
- *      |     | 4,10, 17, 24, 30, 37, 11, 31
- *      |     | 5,12, 19, 25, 32, 39, 16, 36
- * -----------------------------------------
- *
- * @remark Track in the table should be read top-to-bottom, left-to-right.
- *
- * @note (EE.1) This table (from the reference code) does not comply with
- *              the specification.
- *              The specification contains the following table:
- *
- * Track|Pulse|        Positions
- * -----------------------------------------
- *  2   | 1   | 0, 5, 10, 15, 20, 25, 30, 35
- *      |     | 1, 6, 11, 16, 21, 26, 31, 36
- *      |     | 2, 7, 12, 17, 22, 27, 32, 37
- *      |     | 4, 9, 14, 19, 24, 29, 34, 39
- *
- * -----------------------------------------
- *
- * @note (EE.2) Reference G.729D code also uses gray decoding for each
- *              pulse index before looking up the value in the table.
- *
- * Used in G.729 @@6.4k (with gray coding)
- */
-extern const uint8_t ff_fc_2pulses_9bits_track2_gray[32];
-
 /**
  * b60 hamming windowed sinc function coefficients
  */

libavcodec/amrnbdec.c

@@ -83,7 +83,7 @@
 /** Maximum sharpening factor
  *
  * The specification says 0.8, which should be 13107, but the reference C code
- * uses 13017 instead. (Amusingly the same applies to SHARP_MAX in g729dec.c.)
+ * uses 13017 instead. (Amusingly the same applies to SHARP_MAX in bitexact G.729.)
  */
 #define SHARP_MAX 0.79449462890625